Bugs fixed in Release 5.0.6

This ASCII document lists bugs fixed in SCO OpenServer between
Release 5.0.5 and Release 5.0.6.  Other less significant bugs
fixed in this release might not be listed.


     ----------------------------------------------------------------------

Bug-ID:     SCO-232-823

cannot read or write to floppy disk drive                       
format a:, always gets failed, abort, retry. Already patchflop  
with different variable without any luck. This is on AMD CPU    
system only. I do have one in house for testing.                

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-28

scocal hangs if you cancel "print" (or allow it to print...)    
"Cancel" button in the resulting window.  scocal no longer      
responds to mouse or keyboard input.  Hmmm.  Also happens if you
*don't* cancel -- if you go ahead and actually print.  But you  
can at least kill the window, and the printout seems to be OK.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-394

Floppy driver should enable FIFO by default                     
in /etc/conf/pack.d/fd/space.c and in N00 kernel.  Currently,   
OSR5 floppy driver depends on BIOS to enable the FIFO, and tends
to have floppy problems on machines that have FIFO but whose    
BIOS doesn't enable it.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-255

Need "scoansi" termcap/terminfo entries                         
should provide "scoansi" synonym for our console.  That name is 
used by Kermit and Linux for the SCO console emulation.  "ansi" 
is difficult name because so many OSes use it for their own     
variant ansi's.  Add "scoansi" synonym akin to "ansi80x25".     

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-63

XENIX fsck may still require a scratch file for large filesystem
potential reason for `divvy` to recommend a scratch division,   
when it would be better to remove (disable) that code entirely. 
There is a static array size somewhere in the source, just raise
it to be larger than needed for largest possible XENIX fs (2GB).

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-154

S51K and XENIX fscks limit themselves to 400K RAM usage         
according to the S51K source).  MAXDATA isn't used to declare   
arrays or anything, so it could be made a command-line argument:
`fsck -M 1000` for instance.  Much easier for user than scratch 
file.  Could even exec itself with -M flag when necessary.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-242

nap(S) consistently naps for 20ms (2 ticks) longer than expected
longer than requested.  I could understand 10ms (in an attempt  
to avoid partial-tick problems).  20ms just doesn't seem right. 
Note: this and the previous problem were both tested with the   
Release Supplement 5.0.0d.                                      

     ----------------------------------------------------------------------

Bug-ID:     RUS-1-12

date_format() incorrectly prints date                           
file incorrectly prints date for date formats that use          
two-digit year field for years greater then 1999.               

     ----------------------------------------------------------------------

Bug-ID:     RUS-1-27

some scripts from OpenServer's build tree use 2-digit year      
isc/prl, NetOS/usr/src/tools/misc/unxupd, dosm/usr/src/tools/bat
ch/cutchk.sh                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-124

Atapi Tape driver may hang on btld installs.                    

     ----------------------------------------------------------------------

Bug-ID:     LTD-210-472

mscreen on ptty - vi displays extra char if cursor keys used    
Load 'vi' and enter insert mode. User cursor keys to navigate   
then press ESC to exit insert mode. A spuriuos character appears
at the current cursor position (eg. 'B' if last cursor key used 
was 'cursor-down'). Not a problem on a normal tty.              

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-47

hello(C) does not check type of utmp entry                      
usually fail since you can't get at the terminal.  Also `hello  
rc2` and other such nonsense.  It should insist on ut_type ==   
USER_PROCESS.                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-237-260

osavtcl will coredump when saving messages containing accented  
dump when saving a msg containing those characters to a stanza  
file.  See LTD-245-2506 (core dump in shutdown manager).  This  
affects all scoadmin clients writiing to stanza files.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-34

vi mis-expands $HOME/filename due to wordexp(S) bug             
238-33.  wordexp("$HOME/.profile", &we, 0) splits words on chars
"nul", so returns 5 words.  In vi, ":r $HOME/.profile" fails    
with "Too many filenames".                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-6387

Get Fatal Error "Unable to open host lcs table, error -1"       
may see a Fatal Error "Unalbe to open host lcs table, error -1" 
message. A work around of resetting the env variable is attached
This information is also available via SCO Technical Support    

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-997

Running dos program causes kernel corruption.  Reboot required. 
problems.  Only cure is to reboot.  Program available on request

     ----------------------------------------------------------------------

Bug-ID:     JPN-1-35

About /usr/bin/dosinstall                                       
not ja_JP.EUC, we can't install Japanese DOS. So I suggest that 
when we execute " dosinstall -j", Japanese DOS is installed.    
I put "dosinstall" script which allows "dosinstall -j".         

     ----------------------------------------------------------------------

Bug-ID:     JPN-1-37

MS-Windows Ver3.1 on MicroSoft MS-dos Ver3.1 on Merge3.2.2t     
Also,"kana" Key can't be used.                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1492

Can't force unidirectional mode / RTS remains high              
but, by using a scope attached to his 16550 UART he is able to  
see that RTS remains high.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-449

Can't lock file on LMCFS using 3.2.2t.                          
a file that resides on a LMCFS, the access is denied.  This used
to work on 3.2.1f.  UK engr believes that Merge has changed in  
the area of locking.  It now uses fcntl() requests with F_GETLK.
This change can't be supported by LMC due to the SMB protocol.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-641

Text is fouled up at media selection screen.  Still usable.     
it on his behalf.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-642

Cannot enter a root password during IQM.  Must use `defer'.     
it on his behalf.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-504

drv, 3COM, driver delivery - 3COM 3C980 driver                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-501

e3H, 3COM, Driver Delivery - Verify/Add support for 3C920 ASIC. 
3C905C family of NIC's.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1366

named pipe for CHARM server I/O setup incorrectly               

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1425

lpd printers configured with printer manager disappear.         
printer manager the lpd printer is not listed. lpstat -t does   
does show it. All local or remote printers configured afterwards
aren't listed in printer manager upon reenter. All local        
(serial/parallel) are fine as long as no lpd is done.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-842

aliases addressed to remote host are seen as relay and blocked  
and .forward files are expanded before the relay is checked.    
This means that a local address aliased to a remote address     
will be seen by MMDF as a relay, and will be blocked incorrectly
The check should be done before alias expansion.                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-353

The image/boot/readme file is not on the cdrom                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-617

/images/nuc in CD hierarchy has no images                       
there should be UNIX NLM disk images and sum files but there    
aren't.  If we obsoleted/removed the images we should remove    
the whole directory.                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-618

Some /images/boot/*.sum files on CD have PI build tree info     
notebook.sum have the PI build tree directory path next to the  
sums, e.g.:                                                     
15930 2880 /pi/OSR.NIGHTLY/osd/pi/files/images/boot/btld.img    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-600

Fatal Error when selecting other in timezone during install     
select the time. back out using esc causes the following message
Fatal erro in ./../widgetslist.C line 535 Function GetListString
value: Index out of range/ RamFS listdir/iqm/iqm terminated by  
signal 6                                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-667

ISL BL6 - get 'WARNING: Stanza section manual_select not found' 
4/17/2000 (SID: 89).  This appears when I get to the screen that
says 'System name:'  It appears at the top of the screen for    
no apparent reason.                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-269

Install abort @0% "ARCserve_lite not found"; trys to restore OSR
paused at 0%; Parcel "SCO:ARCserve_lite not found in software   
database".  OK to continue leads to: "Install of OSR has failed 
...SYSTEM HAS BEEN RESTORED (not true)...try again or reboot    
previous system...  Could not boot previous OSR "boot not found"

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1440

pnt driver ver3.0 doesn't work with Compaq 10Mbps ISA nic       
WARNING: pnt Cannot install intr vecno=65535, type=1, IPL=5     
         Bad interrupt vector 65535                             
The card is non-responsive (no ping, etc); bring over 5.0.2 pnt 
driver (ver2.2) and the card now works fine, no error message   

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-167

When AMD share an irq with other pci devices, it will hang.     
PCI will share IRQ. AMD sharing IRQ will cause the system to    
hang on boot. Need to fix this ASAP.                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-168

AMD doesn't gets autodetect when add new Lan card               
AMD PCI NIC doesn't gets auto detected. Missing SubvendorID     
hw -r pci see: VendorID 1022, DeviceID=2000, RevID=25, subvendor
ID=1014, subsystemid=2000. I added the subvendorID along in the 
pnt-pci driver fixed the problem. We need to rev. the driver.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-46

AMD PC-SCSI motherbd lan adapter not recognized during install  
see attached                                                    

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1403

NIC1 & 2 are active, NIC1 or 2 gets hangs up on heavy Net load  
SCO 5.0.5, pnt driver (4.02) two ISA AMD NIC ---> Net hang up   
SCO 5.0.2, pnt driver (2.2) two ISA AMD NIC ----> No hangs up   
SCO 5.0.5, pnt driver (2.2 from 5.0.2) two ISA AMD NIC --> OK   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9341

AMD PCNet -PCI Adapter                                          
to test to ensure it works.  Needs to be tested.  Source in     
tree for bl.5                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9342

AMD PCNet-ISA/PCNet-ISA+ Series card not able to configure      
configured.  I don't have any more info on this because         
engineer has left the company. Driver was integrated into       
Davenport source trees.                                         

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2759

The AMD driver(pnt) is slow                                     
replicate the problem. However, IBM have been testing and       
found the "pnt" driver to be slow compared to the Intel         
EtherExpress Pro100B running at 10MB.                           

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1040

Card is not configured properly at install time.                
at install time, the card is not recognised at boot.  I needed  
to remove the card and re-install it before it was recognised.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-211

Mail displays messages with > 32759 lines as negative number    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-356

unknown option name MaxHeaderLines when starting sendmail       
"/usr/lib/sendmail.cf line 230: readcf: unknown option name     
MaxHeaderLines" This error message can be resolved by commenting
out the line in the sendmail.cf file.  Once it is commented out 
sendmail can be started.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-357

sendmail is unable to start becuase of group writeable errors   
"/usr/lib/sendmail.cf line 56: fileclass: cannot open /usr/lib/ 
/uucp/Systems: Group writable directory. uucp was not configured
in mkdev cf. Once the line FU/usr/lib.....gets commented out    
sendmail can be started.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-370

 /usr/lib/mail/aliases.db: Group writable directory error       
results in the following error message: unsafe map file /usr/lib
/mail/aliases.db: Group writable directory. Setting the options 
 DontBlameSendmail=GroupWritableDirPathSafe in the sendmail.cf  
file, mail is delivered.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-687

SendMail component does not install SCOadmin object under "Mail"
installed under the "Mail" folder, but at the top level.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-797

SMTP anti-relay is not enabled by default                       
sendmail should be enabled by default.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-958

imapd fails to authenticate passwords > 8 chars in high security
passwd returned from getspnam().  crypt() only returns a value  
based upon the first 8 characters.  imapd should use bigcrypt() 
and getprpwnam() which return values dependent upon system      
u_pwseg config in /etc/auth/system/default.                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-928

sendmail won't start after IPU - can't send or receive mail     
manually, gives "451 /usr/lib/sendmail.cf: fileclass: cannot    
open /usr/lib/uucp/Systems: Group writable directory."  Andrean 
says upgrade using old sendmail.cf so we're missing the         
"DontBlameSendmail" option, SMTP anti-relay feature, etc.       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-303

Licensing 2 or more cpu's functions but reported incorrectly.   
licensed.  Added a (2)cpu license.  Message displayed that      
(1)cpu was licensed. Should display (2)cpu's licensed.  Ran     
"cpuonoff -c" and verified a total of (4)cpu's were active      
[3 licensed, 1 default] Licenses added using License Manager.   

     ----------------------------------------------------------------------

Bug-ID:     CAN-30-138

NUCAM causes PANIC if root chmod on vol dir while it is in used.
directory (e.g. chmod 755 sys.nwv) while the automount directory
is also used by another non-root user. This happens for both    
SCO 5.0 and Tenzing/T2, on both NetWare 4.x and 3.x servers,    
with both NLM v2.0 and NLM v1.1. Please see attachment.         

     ----------------------------------------------------------------------

Bug-ID:     CAN-31-61

Tispx hangs if t_listen() interrupted by a signal.              
ng return code from t_listen(). Errno is not cleared after t_lis
ten() is interrupted so a version of tispx that does not ignore 
SIGCLD can establish only one connection. Should check return co
de from t_listen() before looking at errno.                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-434

"cnorm" capability in ansi terminfo disables 43-line mode cursor
This can be corrected by adding an ansi43 terminfo entry which  
would read approximately: lines#43, cnorm=E[=5;7C, use=ansi.    
Currently this makes 43-line screens essentially unusable.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1160

Trying to get a snapshot backup of 5 filesystems in RAID array  
been unable to get a response from emails to peterkn or georgep 
as to whether this is even feasible or what the problem may be. 
I am therefore bugreporting and escalating.                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1213

HTFS freed block and invalid block panics                       
approx once a week.  Similar HW setup to Medimipact ERG701315.  
Symptoms different--HTFS panics, not tcp-related hangs.  happens
both with RS504C installed and removed.                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-532

r3p, ATI - Updated r3p driver RAGE PRO - adds supt for ddang.   
(r3p).  This version adds that support.  Awaiting emailf        
from ddang that it worked.  Need to check into OSR 5 and        
UW7 systems.                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-164

ATI 3D Rage pro driver doesn't work                             
Dell PowerEdge 2300: SystemID 4744, RevID 5c, SubSysID 0081     
Dell PowerEdge 4300: SystemID 4744, RevID 5c, SubSysID 007c     
Dell PowerEdge 6300: SystemID 4749, RevID 5c, SubSysID 007f     
None of this works with R3P driver.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-511

r3p, ATI, - ATI 3D RAGE PRO AGP on Dell machine doesn't work.   
ID's to configuration file. But only part of the screen is      
drawn.  Need ATI to add this new version of card to support it. 
100247495c001028007f is the Vendor/Device/Rev/SubVendor/SubSyste
m ID.  Dell can't sell its machines until fixed.                

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9577

Stream check sometimes fails                                    
test suite acknowledged by SCO                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9581

ANT does not allow the kernel to be rebuilt with no driver confg
configured.  This appears to be a bug in ANT.                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9586

Remove lmunbe test                                              
optional lmunbe test should be removed                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-774

the aoflint/parser.y file defines MEDIA_TYPE incompletely       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9743

shrk driver should be ported to OpenServer as PCI sample driver 
source as a sample MDI driver                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9726

shrk driver should be ported to OpenServer                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9821

the product currently called HDK 7.1.0 needs pkgadd format ANT  
HDK 7.1.0.                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-519

ANT, SCO, - test suite cannot be removed - needs de-install prog
to a working network environment.  Currenlty you have to        
reinstall the system  Wastes engineering time.                  
barry says he might be able to fix this when he tests shark.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9849

the HDK 7.1.0 O5ndsamp package should be in pkgadd format       
HDK 7.1.0.                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9852

the HDK 7.1.0 O5hbacert package should be in pkgadd format      
HDK 7.1.0.                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9866

O5ndsampl version 7.1.0 (hbl2) doesn't build custom+ products   
(hdk 7.1.0, hbl2) does not build custom+ installable products   
properly.                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9870

O5hbasamp VERSION is 5.0 - should be 7.1.0 in HDK hbl3          
for consistency with the other HDK packages.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-235

SECURITY: ftp client is fooled by funny chars in "mget" command 
prompt; mget ?id; ftp runs `id` as you.  Could've been anything;
you could have been root.  Perhaps unwise of you to "mget"      
someone's collections of traps, but ftp shouldn't parse remotely
-obtained filenames as if locally typed!  "mput" also dangerous.

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-159

atapi tape hang when booting from root/boot floppies            
If tape status is issued to tape after mounting hard disk tape  
does not hang.  Tape does not hang when booted from hard disk   
only hangs when booting from root/boot floppy set.              
see attachment                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1432

netconfig hangs after installing oss491a                        
Protocol for an already configured interface.  Trying to exit or
cancel from the protocol screen caused netconfig to hang. Did   
not try other netconfig functions, such as add/remove a NIC.    
Reproduced in house, customer repro on both uni and MP machines 

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2823

The "file" command updates the modification time of it's target.
time (ls -lc) and not the access time (ls -lu).                 
In fact, I understand that it is the inode update time which is 
being changed.                                                  
UW7 behaviour of file is different to this (correct).           

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1447

TLI Programs that used to work under 5.0.2 do not work on 5.0.5 
problem that the customer is reporting.  Basically, after the   
first data packet is received by the active port on the server, 
and a response packet has been send back to the client, there is
a deadlock wherein all subsequent packets are not acknowledged  

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1362

After installing OSS491A netconfig hangs adding new lan adapter 
that appears, click ok on default settings and confirm adapter  
set to these settings.                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1446

HTFS/EAFS contain .slog0000 file which root can't access        
of the file fails with permission denied.   It seems to occur on
some installation.  Nothing unusual about the install.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-134

hello(C) lets you write to ttys it shouldn't.                   
there.  I'm not sure if it's possible to break security with    
this, but I will submit a fix ASAP.                             

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1361

Pseudo-tty settings not reset after use.                        
by the next session. e.g. invoke a scoterm, by using stty -a    
notice the ROWS, COLUMNS, XPIXELS, YPIXELS settings. Exit the   
scoterm, telnet to the machine and hopefully get the same       
ptty. Notice the last stty settings are still in force.         

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1386

Each successive call of ftp_getfile keeps a file open           
from the remote system, it returns the mesg "too many open files
". Increasing NOFILES allows correspondingly more files to be   
copied before the message reppears. Need to use -lftp -lsocket  
to compile.                                                     

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1378

doscp A:/ * results in previously erased files being copied     
from diskette being copied to UNIX fs with 1st character of name
modified (1st bit changed from 0 to 1 per the DOS FAT,          
according to customer). Accompanying message is ERROR internal  
inconsistency in DOS disk (see SR 358423).                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-135

hello(C) isn't char-by-char, as intended                        
at a time -- this is the defining difference between hello(C)   
and write(C).  Some change in the terminal drivers (I think) has
broken that for 5.x.  I will submit a fix for hello.            

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1468

X server fails to startup completely if STRMSGSZ is 64K         
mouse still works but that's about it.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-157

ping messages severely garbled in various situations            
in new message catalogues which preserve the original messages  
(in case running an old binary) and whose new messages are      
previously unused message numbers (in case new binary running   
against old message catalogue).  Else it gives crazy time stats.

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-703

ftp_putfile will abandon file descriptors.                      
(this is because the first call destroys file descriptor 0)     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-152

/etc/mnttab "remote" flag not properly maintained               
filesystem mount programs and not others.  mount(ADM) with no   
args shows its state.  Also used by df(C) -l.  Maintained       
incorrectly by NFS mount(ADM) and automount, possibly LMC and   
NUC mount programs.                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-201

/etc/killall can be forced to dump core                         
longer than 256 chars, stack gets overwritten leading to core   
dump (and potential security hole).  A user could exploit this  
by starting a large number of processes whose name is known to  
be targeted by some shutdown script (e.g. "nfsd").              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-282

Interactive fdisk/divvy install aborts at start of disk setup.  
successfully until hard disk initialisation selection screen.   
Chose "1. Continue with hard disk initialisation". Screen clears
and "Press any key to continue" followed by "Safe to power off".
Same result whether previous OSR installation is bootable or not

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-238

mkdev scripts start with "#!/sbin/sh"                           
fd`-generated boot floppy, third-party boot floppy (Lone-Tar    
AirBag, etc.)  Change them back when we can guarantee /sbin     
*always* present and sufficiently populated to be beneficial to 
each individual script.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-240

aasOsa looks like it will be fooled as to which OS it's running 
net/aas/aasOsa/aas.procs is looking for `uname -r` to return    
exactly "3.2".  On 5.0.6, this returns "3.2v5.0.6", so it sets  
assorted variables to values appropriate to UnixWare, presumably
failing as a result.                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-239

Undocumented p2open(S) invokes /sbin/sh                         
and possibly other OSes; `configure` scripts will find it if    
they're looking for it.  Resulting binary works on 5.0.5 or     
5.0.6, but not on 5.0.[024], 3.2v4.2, etc.                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1397

Kernel panic when running multiple fsck's after irregular crash 
(robb).                                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1633

/dev/fd/* increase i_count until wrap panics                    
user to panic the system.                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1603

High security users may generate zero length passwords          
Force password change at next login.  Have user logon the GUI.  
Click OK and respond "yes" to null password inquiry.            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-106

kbmouse driver can panic trying to init hardware during IRQ     
from kbmintr(), from clock().  kbminit is very slow; another    
clock() occurred during initialization and lead to a panic.     
Code needs to be restructured (I will submit fix).              

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-230

Panic dump may overwrite crucial tape backup                    
specified a dumpdev if they didn't want to dump there?"  A: tape
drive may still have last night's good backup!  Also allows skip
tape, dump direct to swap, for faster turnaround during debug   
session even though system's normal config dumps to tape.       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1415

Master pty open fails w. errno 5: 5.0.4c's & erg500794's spt dri
the spt from erg500794 (post 5.0.5). Both drivers behave the sam
except that w. erg500794's spt, when the slave side is closed,th
master doesn't find out about it.  See file included & Support  
track record #817984, Action#26 for full details.               

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1606

mscreen doesn't run sd if /etc/default/security exists.         
/etc/default/security exists, e.g., for NIS.                    
http://support.sco.com/cgi-bin/wow/st_ww.showsr?c_callid=827081\
&c_supstr=us                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-552

sticky bit on directly behaves incorrectly                      
with perms rwxrwx---. UserB (same group as "disk1" and userA)   
can not modify the file. The man page userB should be able to   
modify the file. Posix sez you can. On Unixware you can. This   
is high priority fix needed asap for the Appliance Server.      

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2466

syslogd broken in comet BL10, entries not written to syslog     
syslog file. Killing off syslogd and restarting it solved the   
problem, but as soon as it was sent a SIGHUP the problem        
returned. Problem after boot caused by /etc/rc2.d/S85tcp sending
a SIGHUP. Problem was not present in comet BL9.                 

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1444

security hole in "mscreen"                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-229

Lock timeout panics difficult to debug                          
changes which keep track of the caller addresses of the owner of
each lock, and dump a readable lock stack trace in the event of 
a lock timeout.                                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-242

usleep(S) triggers spurious SIGALRMs to the calling process     
is implemented in terms of itimers.  Although SCO-238-241 should
be fixed, I propose to fix SCO-247-242 itself by re-implementing
usleep() in terms of select(S).  The resulting code is far      
simpler, less prone to race conditions and other weirdness.     

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-122

ps(ADM) produces no output if stdin or stderr are closed        
line.  Actual bug is in libprot set_auth_parameters.  I will    
submit fix.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-218

grep family programs do not handle long lines properly          
script which demonstrates the problem.  Neither 3.2v4.2 nor     
Everest grep/egrep/fgrep handle lines longer than 2048          
characters long.  Everest grep apparently handles up to 2048    
chars, which is better than tbird; egrep & fgrep already did.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-333

several problems with w(C) output formatting                    
2. Not necessary to use leading zero for JCPU/PCPU.  Can be blnk
3. Idle field can be blank or run together with Login@ field,   
making it difficult to parse from a script.                     
Attached is a version of w.c which corrects these issues.       

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-355

NEMAP needs to be tunable                                       
why you might need to increase it.  My housemate john@armory.com
uses mapchan for various things & has had to up NEMAP, so I both
know it works & can be needed in the real worls.  Site w/many   
international users would similarly need more mapping channels. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-593

w(C) violates "mem" privilege                                   
"mem" privilege.  In fact, the "w -D" option shows not only "w" 
output but also a goodly subset of "ps -ef" output, without any 
regard for lack of "mem" privilege.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-831

 with 128GB of HD, dfspace and df report incorrect results      
> 64GB. In the process of this testing, they believe that OSE   
reports incorrect df & dfspace results. The 128GB consisted of  
14 9.1GB drives, configured as a boot drive.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-679

mscreen aborts if filesize limit < size of /etc/wtmp            
than the size of /etc/wtmp at the time a user exits from an     
mscreen login session, mscreen exits with 'exceeded filesize    
limit' instead of starting a new login.  mscreen should either  
raise its ulimit or ignore inability to write /etc/wtmp.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-873

sar reports should show the associated command line option      
of the sar report, the corresponding option that generated that 
section so the user can refer back to the doc conveniently.     
Especially confusing currently is the fact that the sar -A outpt
is in no decernable order (specifically not in order of options.

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1572

grep on a file with null (\0) characters alters the file format 
file2; #diff file1 file2; #vi file1 w! file3; #diff file1 file3 
when the null chars are before a carriage return, the CR is     
removed from the file joining 2 line into one.  This is majorly 
screwing up a customer's order processing.                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-43

rlogind does not remove utmp entries on exit, with removed TCB  
/tcb or /etc/auth, TCBFILES=OFF in /etc/default/security); exit;
`who`; see utmp entry not removed & complaint in syslog.  2 bugs
in rlogind: doesn't honor TCBFILES=OFF, and should remove utmp  
entry unconditionally, before doing any of those TCB checks.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-44

telnetd does not remove utmp entries on exit, with removed TCB  
/tcb or /etc/auth, TCBFILES=OFF in /etc/default/security); exit;
`who`; see utmp entry not removed & complaint in syslog.  2 bugs
in telnetd: doesn't honor TCBFILES=OFF, and should remove utmp  
entry unconditionally, before doing any of those TCB checks.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-317

namefs_ not configured in by default                            
namefs_ on, and STREAMS are enabled by default, so it seems that
namefs_ should be on by default.  But STREAMS aren't enabled by 
`mkdev streams`, rather, by the link kit being shipped that way 
(I think).                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-63

"101" entries mis-entered as "111" in /usr/lib/keyboard/*       
proper entry for keycode 101 (files wx*, jpn*, *850*).  The     
other 34 have two entries for keycode 111 and none for 101.  The
first "111" in each of those files should be changed to "101".  

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-203

syslogd splits messages, puts date stamps in middle, may lose   
/usr/adm/messages lines, inserts date stamps into the middle of 
lines, may sometimes lose part or all of a line.  Code which    
does this is clumsy and inefficient.  Bug filed so I can submit 
the fix.                                                        

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1315

Need OpenServer to write to century byte of PC CMOS RTC         
PC CMOS. The driver should be updated (via a patch) to write    
this byte                                                       

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1473

process started from cron that forks leaves zombies             
file. Before installing OSS497C root gets mailed by cron        
saying that the pid passed to the signal handler is the same as 
the one that was then waited on by the signal handler, as       
expected. After installing OSS497C zombie is created instead.   

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1474

df -v reporting 0% used when over 47% used                      
Included is the output of "scotruss" with 47% then when more    
used the value of %used drops to 0%                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-105

console driver should initialize winsize structure              
40x25, maybe others.  The driver ought to initialize the winsize
structure so that programs which are aware of it will see the   
right screen dimensions.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-598

If problems with /dev/tty, pg(C) doesn't give useful err msg    
gives a less than useful error message, "pg: cannot reopen      
stdout" -- should be something like "pg: cannot open /dev/tty:  
[perror output]".  (I'm reporting these because /dev/tty going  
missing or bad perms was a common problem with I was in Support)

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-604

something wrong with standalone library stdio -- cat don't cat  
boot/boot/cat.c.  It doesn't cat, but it will print error msgs. 
Fiddling w/the source produces weird results implying standalone
stdio code is seriously buggered.  (Shippable /stand/cat would  
be great; remember, only allow world-read files, for security). 

     ----------------------------------------------------------------------

Bug-ID:     SCO-232-635

DTFS mount has non-functional code to warn about label mismatch 
f_fname field doesn't match the directory on which filesystem is
being mounted; however, it mis-calls statfs(S) and always gets  
EINVAL.  Note also that other versions of mount(ADM) used to do 
this but it has now been removed; probably just remove this.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1308

shell escape from pg, use of mesg command changes /dev/tty perms
/dev/tty. Then use mesg command with either y or no options.    
This changes /dev/tty perms, such that subsequent non-root users
can't use programs such as pg because they don't have perms to  
open the device file.                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-225

mapkey data files (/usr/lib/keyboard/keys) wrong ACSII name 0x1f
/keyboard get this wrong, and so does the mapkey utility which  
reads them, and the man page keyboard(HW).                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-284

w(C) truncates hostnames                                        
up to 256 chars; what is the point of this if the tools which   
display the information throw it away?  Run `w -x`.  Other probs
still outstanding: SCO-232-233, 333, 593 (avenrun s/b unsigned, 
field formatting problems, and violates C2 DAC "mem" privilege).

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-62

Missing, duplicate entries in /usr/lib/keyboard/*               
line for keycode 115 (should be "115 nop nop nop ... O" like    
other near-by lines)                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-64

w / uptime print "up 15:19, 19 mins"                            
uptime print "up hh:mm, mm mins".  I will submit fix.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-65

When up (n days +) 1 minute, w / uptime don't print "1 min"     
& uptime don't print "1 min", e.g. right after boot,            
"up  0 users".  I will submit fix.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-231

New user mail truncates system name                             
to rubidiu".  Have trivial fix in hand.                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1138

Psuedo tty driver is not multithreaded.                         
was causing bottleneck on SMP system causing over 50,000,000    
context switches to occure.                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-207

prc_sync should have a debug flag                               
debugging info -- just add "-x" to the `sh` commands.  Now this 
is difficult (must manually edit each rc script).  prc_sync     
should have a "-x" flag which is passed down to the shells it   
uses to run the scripts.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-107

kbmouse driver could share IRQ 12 with other drivers            
mouse to share its IRQ 12 with other drivers.  This will help   
avoid "interrupt is private" panics induced when a user adds    
kbmouse to kernel on a PCI system which happens to assign IRQ 12
to their SCSI host adapter.                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-232

User requires ability to dump to dump device without prompting  
tape.  At panic time, kernel prompts whether to do this (thus   
protecting last night's backup, e.g.).  Some users dedicate a   
drive to dumps and want the dump to proceed without prompting.  
This bug ID to check in the corresponding code.                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9926

du display negative values for size                             
Code accumulates blocks in signed int - will go -ve for sizes   
>LONG_MAX (2147483647L) (BIG DIRS) . Should use ulong           
Note: uses nblock() fm libos - this also needs change to use and
return ulong vals (and anything else that uses it)              

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-116

SECURITY: hello(C) can be used to disable logins                
lets you write to /dev/../etc/dialups, i.e. /etc/dialups.  If   
you write a single very long line (260 chars didn't work, but   
about 1000 did), logins are completely disabled, even if no     
dialup passwords in d_passwd.                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-197

rlogind/rshd (ruserok) parse .rhosts, hosts.equiv too generously
core on /.rhosts, and embedded in this core file is a string    
that gives the attacker permission to rlogin.  As one part of   
defense against this, make ruserok() reject .rhosts files which 
contain binary gibberish.                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-210

UW7 suppresses core dumps in insecure circumstances - shld do   
see www.pd.london.sco.com/stg/documents/security_mrs/ul99sw.htm 
seacrh for "core". MR's ul99-{15306,11205}                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9390

IPU pause.  "Unable to remove custom symlinks report"           
symlinks report from the crontab file.  This results in a bad   
system call error and IPU pause.  This was fixed for the routine
to add the custom symlinks report.  Needs to be carried over    
into the routine to remove it.                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-170

ramfsrename() arguments in wrong order.                         
thought this would cause a panic, but we get lucky and get an   
EFAULT from kstrncpin(), so we just can't rename files.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-180

HTFS stat() returns negative st_blocks for just below 2^31 bytes
signed long overflow in htstatf().  Problem also appears in     
os/sys3.c:istat32(), dosstatf(), hsstatf(), ramfsstatf(),       
s5statf(), xxstatf(), lmcfsstatf(), and                         
nfs_subr.c:iattr_to_nattr().                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-193

arp/space.c has wrong size of struct arp_pcb                    
and the size of struct arp_pcb is wrong.  Thus the kernel global
arp_pcb[] is too short, and a panic could occur if too many arp 
opens at once.                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-225

scsibadblk (badtrk) fails on drives with major >127             
another major.  If that extra major is >127, badblk.c sees a    
"negative" st_rdev and interprets this as a failure.  I will    
fix (belal).                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9705

Toggle ScoTerm scrollbar aborts sh scripts & corrupts term mode 
cause a memory fault.  Simple script while :, do, date, sleep 3,
done will halt if the scrollbar is toggled.  "stdin Memory fault
- core dumped".  Might need stty sane to reset terminal mode    
settings.  Same bug when cat /etc/inetd.conf | more for example.

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-165

On XENIX filesystem, rename() removes src file before target    
has permission to overwrite target file.  If I own "foo", you   
own "bar", and I run `mv foo bar`, foo disappears, bar remains. 
Noted but not fixed in the process of adding sec_sticky_group   
functionality.                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-166

rename(S) allows `mv dir1 dir2` overwrite dir2, but mv(C) won't.
... dest`.  Latter requires last arg to be a directory; prior   
args are moved into it.  Former is more properly a *rename*, and
overwrites dest -- except if dest is a dir, we still *move* it  
under source.  Need to be able to force a directory overwrite.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-177

timex(ADM) -o, -p flags broken                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-202

Wrong order of operations in telnetd rmut().                    
cases.  It has half a dozen cleanup tasks, all of which must be 
completed even if some subset fail.  See corresponding rlogind  
bug, SCO-238-43.                                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-7626

mscreen doesn't return error code as stated in man page         
of the return value with echo $? showed that it returned 0 not  
a non-zero value, despite the man page saying "mscreen exits    
with a bad (non-zero) return code if there is an error"         

     ----------------------------------------------------------------------

Bug-ID:     SCO-61-1082

mscreen's screens have 1-second startup delay                   
discards input for the first second.  Please add the new "-n"   
flag to the getty command line generated by utmp_getty.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-97-694

after removing security databases and exiting mscreen get:      
When /tcb and /etc/auth removed according to rel.notes, mscreen 
-n 2 on terminal and then exit from mscreen this message will   
appear on console tty01.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-171

POS group has various small fixes to ramfs.                     
provided by POS (NC-OS) group.                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-173

fdisk(ADM) won't compile with DEBUG                             
it can't currently be compiled that way due to bit rot.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-199

pppd fails to correctly log failure to receive a log message    
  if (getmsg(...message source) < 0) {                          
    if (errno = EAGAIN) return;      /* should be ==! */        
    ppp_syslog("message indicating that getmsg() failed");      
  }                                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-208

`rlp` message catalogues out of sync                            
and the corresponding English message catalogue.  Two are       
cosmetic; the others are missing a newline in the catalogue,    
which should be added there as well as to the various           
localized translations.  I'll check in the changes.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-97-969

Increase default MAX_CFGSIZE or make it dynamic                 
default size of 1K is too small, especially with the Sdsk driver
generating two messages totalling ~100 chars.  A system with    
4-6 SCSI drives runs out.  Increase default to 3-4K or make it  
use a dynamic table, 4K at a time, starting with 4K.            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-169

Can't rename your own directory if can't search it.             
"mv: unable to move zark to hark: Permission denied (error 13)".
You *can* rename a *file* with no permissions (in a directory   
you own); you *can* *delete* a directory with no permissions    
(rmdir zark), as long as it's empty.  Should be able to rename. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-179

ncheck should also display sticky files & dirs                  
char devices.  setuid/setgid dirs are also interesting, as are  
sticky files/dirs.                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-191

`ls -l` time format varies, and can't see seconds               
than 6 months old.  Also, there is no way to see the seconds of 
a file's time stamp.  I propose to add the "-T" flag from BSD,  
which resolves both of these problems.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-227

add get(CP) flag to datestamp output files with delta date      
when I get(CP) a source tree, the gotten files were stamped with
the dates of the last delta which resulted in that particular   
version of the file.  Would be dangerous to do this by default  
(breaks make(CP) assumptions), but a flag would be nice.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-585

sio driver fails to to deassert DTR after unsuccessful open     
have modem or non-modem control port open w/fuser.  Make sure   
CD is not asserted so that open of modem-control port will wait.
Do   : lockb_process()                              
Judging by the panic I just experienced (after a `truss xmcd`   
failed), this assumption is incorrect.  Perhaps a more extensive
fix is needed, but as a first pass I wish to change stop() to   
check that p_ptracep != NULL.                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1623

ps -p pid returns no entries when the pid is actually alive     
when pid is alive.  This happens infrequently and can not be    
predicted.                                                      
This was reproduced by support via customer code stub           

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-248

race condition -- prfind() can miss a process on MP system      
Underlying problem is in uts/i386/os/subr.c:prfind().  It keeps 
a "thumb" pointing into the circular list of proc structs,      
telling it where to start and end searches.  No MP locking, so  
one processor can cause another to end its search early.  I fix.

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-241

/dev/null and other "mm" driver nodes don't support select(S)   
not support select(S).  The caller gets EINVAL.  Probably not   
much of a problem for the others, but for /dev/null, degrades   
behavior of some commands.  I have fix ready, pending approval. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-422

Intel has provided new processor ucode update.  Rev oss471; osr5
Freedom, and also into patch oss471 for old releases.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1557

The ftpd daemon will not recognize further commands after errors
mkdir on a non-existent directory (ajsdf/asdfas). You will get  
an error. Then try other commands (dir, etc.). They will not    
work until you run them several times.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-633

vi -L reports the time twice but not the date                   
/usr/preserve/root:                                             
On 03:21:57 PM at 03:21:57 PM saved 2 lines of file "/tmp/plop" 
On 02:25:32 PM at 02:25:32 PM saved 2 lines of file "/tmp/poo"  
even if rs505a and oss600a are installed                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-678

Netload hangs after about 5 minutes of execution                
This has been reproduced.  Netload was running fine on BL4.2.   
Mail was sent to osr5eng asking for help debugging the problem. 
No one has responded to my request.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-231-506

defunct/zombie processes appear even if sig_cld is set to sigign
oss497 patch actually causes the misbehaviour.  OSR05 + 505a    
does not exhibit the behaviour.                                 
invoke " at now +1 minute ./def" a zombie process is created    
during the execution of the applic code                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-261

scohttpd collects zombie children over time.                    
large number of zombies over time.                              

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1024

mscreen is limited to 256 pseudo ttys                           
results in the error "no more tty available". MAXTTYS is hard   
coded to 256.                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-274

Potential security hole in fixmog(ADM).                         
";" in its name causes fixmog to run the post-semicolon part.   
"/etc/default/aaa;reboot" would cause a reboot.  custom+ runs   
fixmog automatically.  The wildcard dirs aren't user writable,  
but many potential holes ensue.  I have a fix.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-265

`ncheck -i inum` non-fatal warnings if last inum > 2 digits     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-250

No readily available program to access a STREAMS pseudo-tty.    
flag, -S, which causes it to allocate a STREAMS pseudo-tty      
(/dev/pts%03d) rather than a BSD pty (/dev/ttyp%d).  I want this
for ease of debugging STREAMS pty driver; customer might have   
some other trip.                                                

     ----------------------------------------------------------------------

Bug-ID:     LTD-209-2945

should be a way to run df without the sync                      
a long time for df to return, for people who just want to       
see a maybe inaccurate snapshot of disk space (historical       
behaviour), can we have a -sync or -nosync option. On systems   
with large buf cache, the sync could mean a minute's wait       

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-233

write(C), hello(C) require user in terminal control database    
be "logged in" -- that is, interacting with a particular        
terminal and recorded as doing so in /etc/utmp -- without       
showing up in the TCB.  We ship xterm and scoterm; also open src
utils `sshd`, `screen`, undoubtably others.                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-267

`man command` confusing when command in multiple sections       
equivalent.  Also make its "See also hd(C)" message clearer.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-273

No readily available program to start controlling tty-less shell
interactive program behaves oddly when started by a shell which 
is running on a tty, but has no controlling tty.  Need a        
debugging tool to easily generate this situation.  I have code  
to check into script(TC) which does this.                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-272

User can force flood-ping by sending SIGALRMs to ping           
many of these can cause networking problems, which is why ping  
restricts its -f "flood" option to root.  However, normal       
user can send ping a series of SIGALRMs to fake it into thinking
its itimers are firing off, thus producing a flood anyway.      

     ----------------------------------------------------------------------

Bug-ID:     LTD-209-2226

df -t and dfspace do a sync before giving information           
minutes for dfspace to return. Most of the time this level of   
accuracy is not required. Can we have a command line switch to  
control whether the sync is performed?                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-270

time(C) -p output not as accurate as it implies                 
are always 0.  Use KAMCLOCK-enhanced gettimeofday() to print at 
least the real (elapsed) time to true precision.  User/sys times
not yet available in precise forms.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-249

Several drivers do not honor O_NOCTTY                           
vpixld.c will set a process's controlling tty even if they were 
passed O_NOCTTY in the open(S) call.  Contrast to code in tt1.c 
which checks FNOCTTY.  This isn't earth-shattering but I have a 
fix worked up, so might as well check it in.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-278

system(S), popen(S) get killed with SIGHUP when tty is defunct  
tcgetpgrp() in xec.c:execute(), case TFORK:.  Need to predicate 
this on (flags & ttyflg).  See also SCO-247-277.  Attachment.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-282

MCD/IP broken due to uninitialized variable                     
it may violate my intended firewall between MCD/IP and not-MCD/ 
IP behavior -- might allow a programmer to send UDP, ICMP, IGMP,
or even TCP packets with screwy length and/or checksum.  Fix is 
trivial and 0-risk (move initialization of variable before use).

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-283

ping can hang after one packet on some systems.                 
generated by setitimer(), rather than no siginfo_t at all.  Need
a minor tweak in ping.c to address this.                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-279

Security hole in /etc/popper                                    
have the problematic code.  It might be somewhat mitigated by   
changes we've made elsewhere, or might not.  There is certainly 
at least a coredump bug by sending it more format specifiers    
than it's expecting.                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-284

man(C) invokes user's pager with TERM=lp when nroffing new page 
cat.*/page, man invokes /usr/bin/man/nr to format the page.  It 
passes TERM=lp in the environment so that nroff will build an   
"lp" format page (backspaces for bold & underline).  If user is 
reading page at same time, pager also gets TERM=lp.  I have fix.

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-288

SECURITY: CERT alert CA-2000-13, ftpd buf overflows, root xploit
    ftp://ftp.auscert.org.au/pub/auscert/advisory/AA-2000.02,   
    ftp://ftp.wu-ftpd.org/pub/wu-ftpd/patches/apply_to_2.6.0/   
          lreply-buffer-overflow.patch                          
I have fixes ready to check in.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-171-584

can add an empty list item using the TwoList package            
the item.  Activating the mover button at this point will cause 
an empty item to get "moved" from one list to the other.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-329

Inconsistant option parsing vs processing (iqm?)                
Convoluted logic for input file processing                      
Incorrect usage text in usage message                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-302

License data is lost when backtracking to "License" screen.     
hit the  "ESC" key to back track.  License number, License code 
info. is saved but License data is lost.  Becomes annoying since
ISL brings the user back to the License screen in some "panic"  
configuration cases.                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-493

IQM password instructions are wrong for High security install.  
instructions say:  Enter a root password that is at least 5     
characters long...                                              
Until 8 or more characters are entered, a warning is displayed  
that says the password should contain at least 8 characters.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-525

Someone wrote a Fatal() routine that returns!!                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-275

Backtracking during IQM causes filesystem-space checking to fail

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-458

For BL4.2(SID:87),IQM text is mis-register and duplicately print
the prevsious screen text. This problem only happens in BL4.2.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-652

WARNING: stanza section 'sendmail' not found in IQM             
a warning message "stanza section 'sendmail' not found"         
is shown in the current screen till the end of IQM section.     
Even the IQM complains about sendmail, the SendMail package     
could be correctly installed.                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-664

Can't back out of install of SCSI Tape driver correctly         
3 instead of 2, hit "q" and then continued to hit "q" to back   
to the # prompt.  Went back in and it configured tape drive 0   
anyway. Tried to remove and got an error mess saying it did not 
exist.                                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-628

security- suppress root login not stop rlogin, rcmd root access 
access via rcmd/rexecd or rlogin/rlogind - need some way to do  
rexecd: set terminal, test SMP_EXTFAIL fm smp_check_user() call 
login -r - test for suppression in do_remote_login()            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-268

catclose(S) does not free memory                                
catalogs heavily, its SZ grows indefinitely.  a simple program  
to demonstrate this is attached below.  replacing it with a     
simple loop performing malloc() and free() does not show the    
same problem.                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1629

install forces the use of alpha names, cannot use numeric       
cannot use domain names such as 3com.com; It is reporting it    
as an invalid domain name.  The work around would be to not use 
domain names that start with a number or metacharacter.  After  
install change the domain name using netconfig.                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-701

Error message "ISLERR: Logic error in FindRootMinor" in ISL     
FindRootMinor" shows in "selecting a keyboard type" screen      
towards the end of ISL.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-855

Cannot configure a scsi tape device.                            
device. Script fails after creating the special devices.        
/dev/xct0, rct0.... I have attached a file, which included the  
steps taken to recreate this problem.  Tape device is not       
accessible, and device nodes were not created.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-640

pink screen is shown between system load screen and IQM.        
it on his behalf.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-868

netisl's client only accepts defer in password screen           
it only accepts  - "defer" as its option. It causes the     
netisl process to be failed due to unable to get correct        
authoriation from server. However, server side's netisl         
password screen is working now.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-845

Non-C locale "netisl client add" aborts and corrupts scoterm env
locale.   to continue past first screen & aborts opening 
message catalog "commonUtils.cat".  Only dist copy in /usr/lib/ 
nls/msg/C_C.C/ linked to islBoot/*/tools/ SSO.  Do scoterm full 
reset.  Seen in FR & DE too.  "LANG=C netisl client add" works. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-694

Clientadd in Netisl cannot add the server password for bootdisk 
software admin password  would not allow adding a password.     
this can be deferred.  The booting of the client fails to no    
password entry to the server.  top of screen says ISLERR: Logic 
error in AskForSecondTry                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-871

Fatal install error: can't ajust divisions to fit usable space..
percent complete screen: Fatal error in diskInfo.c line 3063    
Function DIAdjustDivisions: Cannot adjust divisions to fit the  
usable space: Disk0  Making the divisions & filesystems o/ramFS/
configdisk/config.disk  terminated by signal 6                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-992

default route entry no longer in table when systems are rebooted
being lost when I gracefully shutdown with init 6.  Before      
shutdown a valid default route definitely exists, but when the  
system comes up multi-user again, netstat output has no default 
entry.  Observed on a fresh install and one 5.0.5 upgrade so far

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-941

Error message at top of several IQM screens...                  
code 3" appeared on the top of the licensing page during IQM    
when installing OSR5.0.6 bl.8.  This message persisted at the   
top of the IQM screens until it was refreshed away with the     
"Configuring basic system" screen.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9907

panic in table_grow()                                           
enter; result is a messed up table.  Fix is to add a sleep lock 
to table.                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1508

Streams Leak from unhandled broadcast packets w/dest of all 1s  
both SMP and Uni-Processor, happens with or without 505a, oss497
dumps collected indicate that there are several mblocks allocate
with data but orphaned. Data looks like an ethernet broadcast   
packet with destination address of all 1s(255.255.255.255)      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1467

streams related system hangs                                    
additional detail sto be provided by jeffj in form a an onsitet 
trip report                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9909

xmapalloc can call kmem_alloc at intr time with SLEEP set       
kmem_alloc with the SLEEP flag set.  Result is a message from   
kmem_alloc along with a stack backtrace.  Fix is to base the    
flag passed to kmem_alloc on "activeintr".                      

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2826

Unable to mv file on a share to another name.                   
lmc logon  administrator; mount -F LMCFS /fs /mnt  
mv /mnt/testfile /mnt/testfile gives:                           
mv: unable to move /mnt/passwd to /mnt/passwd.mv: Text file busy
(error 26) - was fine under OSR502.  Only mv within share.      

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2864

Large no. transmitted packets hangs server                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1600

kernel panic in ifconfig in tcp start after tcp stop.           
network degradation about once per day at varying times. Running
tcp-stop followed by tcp start will result in the kernel panic. 
This is on an IBM netfinity 5500 with built in alad and amd net 
chipset. Minidump is on scerg in pub/incoming/pepdump.Z         

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-192

 System hangs - missing interrupts - at boot with 896 chan B    
Install OSMP , RS505a, then oss497c                             
more details attached - joanm needs to provide system for erg   

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-203

accept call doesn't wait on socket;generates an EPROTO error    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1469

5.0.5/5.0.5a iattr_add_to_shared_chain error sharing IRQs       
and disk array controller, gets "iattr_add_to_shared_chain      
failed" WARNING during boot.  System runs fine, but customer is 
not happy about the warning messages coming up.                 

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2846

panic in emunmap()                                              

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1407

m/c panics: Sleeping at interrupt or STREAMS run time           
business on. Have recently u/g'ed from odt3.0 to OSr5.0.2 and   
find when they run "mapchan -n" from a serial terminal attached 
to a terminal-server, get panic "sleeping at interrupt or       
streams run time". Recreated in UK ES lab.                      

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1475

UK IS 504 Compaq server hanging. OSS449D installed, now panics  
upgraded to OSS469c and Y2k patch, system hung, no errors.      
Installed oss469d - not released yet. Now get panic. Panic      
trace sent to Bobt in US escalations. Will escalate             

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9910

streams buffer deadlock can occur under network load            
networking activity can cease for several minutes.  The problem 
appears to be that the network stack wants to allocate a new    
buffer before passing on its current buffer.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-170

Getting WARNING: iattr_add_to_Shared_chainfailed at boot up     
msg "WARNING: iattr_add_to_Shared_chainfailed". There is a fix  
by Asharpe that will remove the warning msg. The following files
"mppic.c, apic.c" contain the fix that needs to be rolled into  
the next rev of the product.                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-175

sptfree messages at boot display, even with oss469c installed   
getting "too many sptfrees" warning message. They want this fixe
d.                                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-657

2nd I/O APIC lines are not used as MPS tables are not read      
APIC id and pin values from the MPS tables. Instead the isa irq 
is used. This causes multiple device irq sharing on a Fujitsu   
Siemens Primergy E200. The 5.0.4 apic driver has the "right"    
code in apic_setup_pci for their machine.                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1677

inode deadlock under extreme load                               
an inode while another process is waiting on bfcount doing      
htepiforce, while the htepi daemon is also waiting on bfcount   
causing a deadlock.  Other areas of the filesystem are still    
accessable.  Dumps available.                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-935

System hangs "G hd_config" after installing SMP.                
the system hangs at the letter G.  SMP did not hang in BL7. This
has been seen in 3 machines so far.  The only thing in common is
that they are Pentium III.  See atachment for hardware info on  
machines.  There is a Pentium Pro 4cpus with BL8 no problem.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-230

scsi HD boot displays all zeroes for disk geom and #sectors     
000000000000 sectors                                            
Suggest shld display nothing if detect SCSI hw or not display   
msg if output values all 0                                      
possbly drop Heads, cylinders info fm display just show sctrs ??

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-245

The system will not prompt boot : but gets "IO ERR" instead     
hardware problems                                               
The system is mitsu.pdev.sco.com located in the water lab       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-283

WARNING: k_trap - Intel Reserved Fault (#15) trap in kernel mode
warning pops up at a steady interval on any of the console &    
tty's. There is no kernel dump, and the debugger                
does not show an interesting stack. This warning also happened  
during ISL without harming the installation.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1253

Boot lacks the extended int13 BIOS calls to see entire disk     
ters for large drives.                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-309

Boot screen reports negative drive capacity.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-183

"Memory excessively fragmented" message when loading btld       
Compaq has requested we issue it as an SLS.                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1352

post oss469a install panic type e when 200+ nfs user mounts     
only when NFS is enabled and when >200 users mount to the server
have 3 crash dumps (tape) all pointing to NFS                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-290

LS-120 drive fails to load bootstrap.                           
prompt.  After the boot promt the following message is displayed
fd(60) unix                                                     
unix not found                                                  
The boot prompt is then returned.                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-399

Boot hangs after identifying the Bios Drive Count               
suspect.                                                        

     ----------------------------------------------------------------------

Bug-ID:     LTD-209-486

t protocol does not log transfer statistics.                    
out transfere stats to /usr/spool/uucp/.Admins/xferstats.       
See other protocols for examples.                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-550

sendmail Denial of service attack                               
causes  it to be unusable when '*large' numbers of header       
lines are used.. see me for details                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-7569

failure from "custom -G last"                                   
  The custom+ binary (backend) process has died.                
Error Stack:                                                    
  Assertion failed: entryArgc >= 1, file "taskLog.C", line 354  
(see PI system yankee)                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-7572

incorrect/confusing error message during space check            
"Insufficient disk space or inodes to install selected products"
when the real error is that an NFS-mounted filesystem is stale, 
which causes an error when checking all filesystems.            
Why not only check the local filesystems, ignoring NFS?         

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-844

Trying to print 20 small files via rlp between OS5.0 hosts fails
results in 15 jobs appearing on remote queue. Need to stop and  
restart tcp on lpd server to print remainder.                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-645

Enterpise system does not install on 400MB hard disk            
Hard disk change to 400MB. continue install the system errors   
with not enough hard disk space to install the default software.
warning if continued will not install correctly than fails the  
installation                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-821

Optional Svcs CD /info/license/evalkeys.* "Note" has mistakes.  
of Evaluation Keys for OSR Optional Services has a typo or two. 
Text "...Netscape products listed hered have these..." should   
probably read "Netscape product listed here has the...".  Also, 
I am not sure if the text about encryption applies to FastTrack.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-620

Wierd character displays in /info/readme.htm, Overview section  
displaying a strange character when viewing with Netscape. (See 
bullet SCO OpenServer Enterprise System Release 5.0.6, for      
example.)  When viewing with Mosaic symbol displays as ¤. 
When viewing readme.txt displays as \244.                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-621

/info/readme.htm, links in TOC broken using scohelp Mosaic      
Table of Contents links in /info/readme.htm on the CD, they're  
broken.  Links work fine with Netscape.                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-986

Replace `ghostview' with `ghostscript' on line 291              
s/relnotes.txt                                                  
Claims ghostview can convert postscript to other formats (PCL). 
ghostscript is in fact the program that's used to convert       
between these.  ghostview is a postscript viewer.               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1005

OptSrv: No evalkeys in /info/license/evalkeys.txt on BL3.0      
It does contain some OpenServer eval keys (which is okay), but  
the optsrv-specific eval keys were left out.  (AFPS, Merge,     
etc).                                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1007

OptSrvBL3.0 /info/readme.txt needs reformatting                 
(poorly) by some program.  Some lines don't fit in 80 chars,    
there are some wide gaps between paragraphs, etc.               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1014

Note on optsrv eval keys refs "Open Server(TM) Release 3"       
isn't a supported platform for 5.0.6 Optional Services, we      
should probably just nuke these lines.  (There are two of them.)

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-191

Intel has provided a new ucode file.  Need to rev oss471; osr5  

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1255

Install MP and Pro100B card stops working.                      
Intel Pro100B NICs installed, one on 10MB subnet, other on      
100MB subnet.  Install as single cpu and everything os OK.      
Add MP support, (relink/reboot) and one NIC stops pinging, only 
itself replies, other systems on subnet do not appear any more. 

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1279

Cannot have 2 Pro100 cards working in an MP system              
NIC's in a Uniprocessor system and it works.  Add MP support    
and neither works.                                              
Reinstating pre-504C MP has no effect.  504 and 504C are both   
non functional.                                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-529

e3H, 3com, - verify functionality of 3c900B adapters            
on OSR5 and resubmit to BBS.                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9625

eeE,Process Intel driver hand off, Release 1.4.2                
it available on SCO's ftp site                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1430

System hangs while processing UDP broadcasts and SCSI backup    
casts, during their nightly backups.  Only nat systems affected,
servers using e3E work fine.  Customer has shown same behavior  
on 5.0.4.                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-521

e3H, 3COM, driver delivery - supt for 3c900B when cards arrive. 
support these cards once we add back in the PCI ID numbers      
for the 3c900B adapters.                                        
 j                                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-561

r3p, SCO, provide support for ATI 3D RAGE Turbo AGP adapter.    
suspect we'll need to update autodetection scheme with new PCI  
device numbers to get it to work. MUST also update the web      
with a new r3p driver if it does work.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-565

mtx, Matrox, G100, G200 - specific adapters don't work w/ mtx.  
davidw created.  Having 3 problems.  See email attached.        
1) G100 of the D1064 PRIMERGY 070, SCENIC PRO D7/M7 machine, no 
visible graphics screen, only a few colored dots and stripes,   
independent of resolution.Error MILVidInit: Invalid ModeInfo ...

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-571

savage, SCO, Provide Savage 3D and 4D support.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-570

r3p, ATI, benchmark r3p driver against two or three other drvrs.
as 16m colors against two other adapter/drivers to compare relat
ive performance.  I'd compare against new G200 adapter/mtx +    
savage 3D and driver.                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9911

r3p, SCO, Add support LCD Xpert Cards (AGP&PCI) with r3p driver 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9950

5.0.6 - update vesa.svga entry in X11/tools/vidconf/tools/video.
Make 1024x768 the default system configuration.                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9951

5.0.6 - Add new drivers to video.stz for ISL install selections.
neo, r128, mtx, savage, and virge new driver selections.        
Note that savage and virge grafinfo files are dynamic so provide
the basic modes similarly to the vesa driver which is dynamic   
also.                                                           

     ----------------------------------------------------------------------

Bug-ID:     UNI-2-78

video card is mapped to 64Mb+ by xgi file ignoring actual memsiz
if system has >64Mb this causes a clash and corruption of the   
graphics displays with possibility of panics.                   
This is not specific to number nine card, many .xgi files have  
similar problems. wrkaround: increase MEMORY address in xgi file

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-442

Update VESA driver to VBE 3.0 compliant level.                  
e the vesa driver to work so we can say we support 3.0 VESA.    
FYI - currently VESA 3.0 does appear to work but we should      
review the specification to make sure it does and then say wedo.

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1617

X11 client session 6 fails to start.                            
begin accepting connections ../dev/X6R: No such file or directoy
Binding TCP socket: Address already in use.  Fatal Server Error 
Cannot establish TCP listening socket. /dev/X6R: No such file   
or directory giving up xinit: No such file or directory (errno2)

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9865

Need to process the latest e3H driver hand off                  
available on SCO's ftp site                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-10003

Need to process latest spwr driver hand off                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-220

Can't configure card to non VESA mode driver.                   
SSO path for the VESA command.  It looks like the script was not
adjusted during the build process, Not sure.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-223

/usr/lib/vidconf/scripts/savage not using SSO path for vesa bin 
ry. It's using /usr/lib/vidconf/AOF/bin/vesa instead of the     
/opt/K/.... /usr/lib/vidconf/AOF/bin/vesa                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-231-495

System panics on bootup if SMC 9432 card is not present         

     ----------------------------------------------------------------------

Bug-ID:     SCO-231-497

Packet loss on dual CPU, Dual SMC lan card system               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-362

OSR 5.0.6, net drivers, didn't autodetect SMC 9432 adapter.     
adapter as per nathan/marty                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-364

driver (spwr) SMC 9432TXTX 10/100Mbps is missing.               
above is suppose to be in this new release.  However, when I    
try to configure the nic with netconfig, it doesn't autodetect  
it, nor there is a choice from the pick list for the nic.       
/var/opt/K/SCO/... only has smpw which is for an SMC 9332.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-397

nd Net Drivers - remove IBM stbg driver as per IBM.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-401

sco, r3p, add support for ATI XPERT XL                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-361

OSR 5.0.6, net drivers,release number is 5.0.5, should be 5.0.6.
They should be bumped up to 5.0.6.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-429

During ISL, it can't find the specific network driver file      
looks fine until to the point where kernel relink. There is an  
error occur which complain: Fatal Error: Couldn't stat "        
/var/opt/K/SCO/lli/5.0.6a/ID/shrk/AOF/osi2300":No such file     
The installation still success if ignor it but netconfig fails. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-504

"...setup script failed..." when configuring Diamond video card 
autodects the Diamond Stealth III s540 adapter as an S3 Savage: 
"error: S3 savage setup script failed.  error: erroro while     
autoloading "SSO_GetSegmentRootPath": wrong # args: autoload ?  
command ? while executing "SSO_GetSegmentRootPath SHARED $lclPa 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-517

Savage Diamond Stealth 3 S540 doesn't restore text on exit      
of X server.  If typed blindly /etc/clean_screen restores text  
properly.  /usr/lib/vidconf/scripts/savage needs an entry for   
a wait of 1000000.                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-549

SCO, shrk, potential memory corruption problem in shrk driver.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9864

Need to process the latest trps driver hand off                 
available on SCO's ftp site                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-441

OSR506 - add ATI RAGE 128 PRO GL adapter support to r128 driver.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-578

Number 9 S3-86C928 not being detected after install             
after an install.  This card was detected in previous cuts      
4.0 and 4.2.  I select the card from the pick list, log-out & in
Graphics look good, but the cursor is a big block of vertical   
lines, selecting a different res doesn't fix the cursor problem.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-579

Neither an ATI MACH 64 nor an ATI Rage Pro card is being autodet
sporadically detected.  ATI Rage Pro's would auto-detect as     
ATI MACH 64's and vice-versa, or sometimes the correct card was 
detected.  Now, they don't get detected as anything, user must. 
pick from the pick list.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-615

SMC, smpw, line speed shows 10Mbits with llistat -l on 100Mb net
run llistat -l, it outputs 10Mbit network when it should show   
100.  Applied fix to code already.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-333

adapter doesn't get autodetected when configuring it after ISL. 
configuring it after an install.  When it is installed, it      
uses the vesa driver, I remove it, but it doesn't auto-detect it
I have to pick from the list of adapters.                       
(Freedom bl4.0c, 5.0.6)                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-647

Wrong network card being detected durig IQM                     
you cannot manually select the correct card. Autodetect found a 
DE500-XA PCI 10/100, when in reality a SMC 9332 PCI 10/100 is   
installed.                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-605

AMD PCnet-ISA+ fails to function. (Behaves differently in 5.0.5)
differently (for the worse).                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9757

trps: does not work on APIC MultiProcessor Machine with IRQ >15 
19. The drvr does not deal with this properly. Note that        
MAX_IRQs is defined as 16 in sscoint.h, and as a result, trps   
won't work on APIC machines if the board gets assigned an intrpt
>15. An easy way to fix this is to change MAX_IRQs to 256       

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-528

Update ISL stanza lists for graphics when Post 506 work starts  
stanza files for ISL Point/Pick lists to work.  Need to         
go through stanza files and update them for all the new         
card support.  Should do this when 5.0.6 OpenServer work        
is started.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-472

trps - IBM vendor update w/ new HW for OSR5 - supts 5 new cards.
IBM PCI Token-Ring Wake on LAN, IBM 16/4 Token-Ring PCI Adapter 
2, IBM 16/4 Token-Ring PCI Special, IBM High-Speed 100/16/4 Toke
n-Ring PCI Adapter.                                             
Place holder bug report.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-680

505, dlpi driver, util.c - allocsap does SAP_FREE one too many. 
make fails.  Found these problems while testing with ANT        
test suite in HDK 7.1 w/ barryf.                                
Similar problem exists in UW7 fx511222 in util.c                

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-508

ant, SCO, - test suite fails on OSR 505 - ipx and tcp test FAIL.
505, the default TERM type is (scoansi).  The wait eventually   
times out causing the IPX and TCP tests to FAIL.  Solution is   
to change ansi to scoansi in ant/bin/rls file.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-522

ANT - eeE FAIL's in Load (High/Short) - timing on 5.0.5. wrks504
Configure Master as eeE and Slave as 3Com 3C905B.  Run Load     
High/Short.  Journal reports failures: 520|0 1 5415 1 19|Framing
ethernet sap 1234: FAIL, 802.3 sap f0: FAIL,llc802.3 sap e0: FAI
L ... Must use eeE because two 3c905B's don't show problem.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-569

hdk, O5ndtests, Using netconfig to remove/reinstall ANT fails.  
ork functionality and then go back and run netconfig to config  
ANT again, ANT will be broken and have strange FAILures.  This  
is because tcp scripts restore /etc/rc2.d/*tcp and ANT doesn't  
re-remove them.  This should be corrected if possible -see barry

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9584

genreport sometimes expects wrong sub-test names                
missing sub-test (dlpi->finish) or irrelevent test (dlpi st,    
LMU).                                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-572

hdk, O5ndtests, during removal of O5ndtests, can't find netconfi
it can't find netconfig (in the middle of removing all of the   
files).  There are about 10 error strings spit out but they     
quickly scroll by as the files continue being removed.  Nasty   
but well hidden.  Appears to remove ANT from netconfig though.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-749

As soon as bload is executed the xdesktop starts scrolling      
that is using a Diamond Stealth 64 PCI video card the xdesktop  
starts scrolling from left to right.  This has been tested on   
two different systems with the same behavior. Dave Wood has     
looked at this and thinks it's the Driver and not the Xserver.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-365

OSR506, O5ndtests,                                              
on OSR506.  Installed and configured as expected.  Running      
dlpi_unit - DLPI Module unit test fails with dlpid - Error De-re
gistration.  Also, dlpid: Service Fds: Poll returned -1         
dlpid: Interrupted system call, NOTICE: NSTRPAGES exceeded.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-760

SCO, ATI, add new ATI RAGE XL Device ID to r3p driver.          
card is not autodetected.  Adding new device ID so card is      
autodetected.                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-166

ATI driver very slow                                            
This video card is very slow, repaint causes heavy disk activity
I am including hw dump.  note video is now set at 1024x768 256  
colors and performace is still slow                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-943

506, spwr, ANT dlpi largepkt test - fails                       
not handled correctly by spwr driver.  Made fix to spwr driver. 
Checking into tree.  This failure also causes dlpid to complain 
that it can't de-register dlpi correctly after largepkt runs    
but before saptest can run.                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-17

spwr, SMC, driver fails at 10Mbps running ANT DLPI loopback.    
at 100Mbps (except for MDI UNIT multicast failure noted by SMC).
At 10Mbps, it also fails DLPI UNIT 'loopback' test.  This is a  
bug in the driver that needs to be corrected.  loopback DLPI UNI
T pass at 100Mbps though.  Sent email to SMC to have it fixed.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-995

506 BL8.1 - ati r3p driver too slow on Siemens systems          
Siemens BMW software rollout of 3000+ machines.  Project        
requied that ATI card perform as well as g100 Matrox adapter    
during sine wave graphics and it didn't. ATI has fixed this     
problem and fix should be checked into 506.                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1040

Not autodetected by scoadmin video config                       
ATI MACH64, Device Id: 475A. When configuring through scoadmin  
video, one can select ATI Mach64 PCI RAGE/II/II+/IIC, and it    
works perfectly.  This will be a very easy fix, talked to davidw
about this card.                                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1041

Card is being detected as a Digital 21143 10/100                
add the DeviceId to the dcxf driver, which was working fine in  
previous BLs as a DEC500.  If this addition is not made, then   
the card simply doesn't work.                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1067

ugly outcome when selecting NeoMagic video for non-NeoMagic card
MagicGraph card when it's really not, you get this gnarly error:
"/usr/lib/vidconf/scripts/neopci: test: argument expected"      
See attached text for details and a suggested fix.              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-724

OptServices CD BL1.3, RS504C Soft Mngr Supp needs to be removed 
I don't think we want customers installing a release supplement 
for OSR5.0.4 on this release, unless the supplement has not been
rolled-in for the past 2 releses.                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-725

Virtual Disk Mgr Release Supp 1.1.0 is on Optional Services CD. 
Release Supplement 1.1.0 for SCO VDM 5.0.0.  This RS was to be  
removed from Optional Services.  The RS code should be          
integrated into VDM OSR 5.0.6, along with more recent Escalation
or other VDM fixes.  Mistaken overlay of old RS could be a mess.

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-95

Can't allocate 24MB STREAMS buffers                             
Cannot alloc STREAMS medge table (NSTRPAGES = 6000 too big)"    
Sure, 24MB is ridiculous, but we're supposed to be supporting 2G
RAM any day now.  (Though this machine only has 64MB RAM)       

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-3

No "Standard 33600" or "Standard 57600" modems in modem list    
are several 57.6Kbps models competing for people's attention.   
In fact, I don't see any 33.6 or faster modems on the list, nor 
any ISDN devices.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-474

dfx, DEC, sco driver - make FDDI driver available on BBS 504/505
Make this available on the BBS.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-488

dcxe, DEC, driver delivery - handoff of updated dcxe driver.    
Just some new source files and bug fixes.                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9619

spwr,Process SMC driver hand off, version 2.04                  
make it available on SCO's ftp site                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-518

wwdu, IBM, Vendor Delivery - integrate new driver handoff       
tar.Z                                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-147

UNISYS-SLC would like support for the SMC 9432 card.            
the "spwr" driver for the SMC 9432 card.  Manual search via the 
point and pick list does show it available but no driver exists 
so all attempts fail.  Unisys would like to sell this card with 
their systems if SCO can find it in their heart to support it!  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9602

pnt,process driver hand off supporting PCNet Fast Cards         
which supports the PCNet Fast and PCNet II devices              

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9794

Need to process latest e3H driver for release on the ftp site   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9795

Need to process latest e3G driver for release on the ftp site   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9796

Need to process latest e3E driver for release on the ftp site   

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-492

e3E, 3COM, driver delivery - Laptop 3c589d support.             
driver or we may have to contact 3com to get a new copy of it   
to integrate.                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-163

Sharing IRQ on two IBM PCI Tokenring hang on boot.              
PCI to share interrupt. When two tokenrings share interrupt.    
After relink kernel at next reboot, it will hand at "H ksl init"
Tried a newer trps driver ver. 2.0.2 from Edwint, same issue.   
System tested in Uniprocessor mode.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-215

add RFC-1877 and MS-CHAP support to SCO PPP                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-262

even if sysadmsh is installed, the icon does not bring it up    

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-10000

IPU removes startd and lockd calls in /etc/nfs                  
when nfs is re-installed, /etc/nfs is untouched.                
During upgrade, don't remove those calls.                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-195

Internet FastStart Admin Guide incorrectly included in product. 
t, should have been removed when Atlasadm was incorporated into 
baseOS as of 5.0.4. The binary handoff from vulcan includes the 
doc package. A new binary handoff needs to be generated, without
the doc component. All relevant material is already in 504+ docs

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-285

Install Ent lightweight character terminal and Vidconf ccs fails
/opt/K/SCO/Vidconf/5.4.1a/usr/lib/vidconf/vidiqm: not found.    
Selected Enterprise lightweight character terminal configuration
at "Initial system profile" screen.  No other software changes. 
Trys to install Communicator but there is no graphics support.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-263

The internet manager still chokes on a long phone number        
int overflow occurs eg. 16192223333                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-256

Errors generated when attempting to add a local mount point     
filesystem the following error is generated when trying to      
select a mount device: Failed to build a list of local file-    
systems.  There were problems getting information from the      
device osa.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-240-22

ScoAdmin tool to display "SNMP Statistics" fails when peer runs 
displays "SNMP Statistics" fails with error "Unexpected error:  
unmatched open quote in list".                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9427

Prompt for FastTrack license pauses Host to Ent intra-upgrade   
pause to enter an evaluation or permanent FastTrack license.    
The FastTrack Server should be licensed by the base Enterprise  
install.  Post-install the License Mgr shows the evaluation     
license for "Unknown Product Name  EVL0022FI  Yes  N/A".        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-349

Authorization for Internet Manager inconsistent and failing     
problems. Not much debugging has occurred. But, several machines
able to get authorized through localhost:615, but not localhost 
:620. One host, Internet MGR coredumps. One host, no passwd     
is needed for either 615 or 620. Docs are not much help.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-464

Netload causes system to panic. TCP filtering is source of panic
has determined that TCP filtering is the cause of the panic.    
I've attached bobt's mail describing the bug.                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-537

Swarm tests / CPULOAD kill TCP after running for about 3 minutes
determine that it is not related to SCO-559-464 (RLock problem  
in TCP filtering).  John replaced /etc/conf/pack.d/ipl/Driver.o 
on target host and we restarted load tests on 3/7. These tests  
need to run for 72hrs. After 24hrs TCP is still up and running. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-440

Mana reporting load error during startup                        
user to admin system.  After typing in the passwd the following 
error is generated:  Mana Load Error - Please contact the       
support department, an error occured while loading a mana docu- 
ment.  The Error file is attached.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-500

Unable to reset access log under Server Status on FastTrack     
Server Status - View Access Log                                 

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1332

locale(C) reports LANG as C when LANG=norwegian_norway.8859     
This also affects danish, italian, dutch & portuguese. Files    
generally are collate, ctype and numeric. This breaks utilities 
like vi(C) which then display 8 bit characters as octal values  
because LC_CTYPE is wrong.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-527

Pause in 505 Ent IPU: "...Atlasadm_doc/ccs: FASTSTART not found"
/opt/K/SCO/Atlasadm/1.3/cntl/packages/Atlasadm_doc/ccs:         
FASTSTART:: not found"                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-412

fails on upgrading from 505 to 506                              
/opt/K/SCO/Unix/5.0.5Eb/cntl/packages/PWRMGMT/ccs:              
  /etc/conf/cf.d: does not exist                                
/opt/K/SCO/Unix/5.0.5Eb/cntl/packages/SCOHTTPD?ccs:             
  /etc/conf/bin/idinstall: not found                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-526

Pause in 505 Ent IPU: PWRMGMT ccs script fails in UNIX component
cntl/packages/PWRMGMT/ccs: /etc/conf/cf.d: does not exist."     
Pre-unconfigure step fails.                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-529

Pause in 505 Ent IPU: /usr/lib/mkdev/mouse: ...: not found      
/etc/conf/bin/path_map.sh: not found                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-530

Pause in 505 Ent IPU: ".../SCOHTTPD/ccs: ... not found"         
cntl/packages/SCOHTTPD/ccs: /etc/conf/bin/idinstall: not found..
.. chown/chgrp: cannot access /etc/conf/init.d/scohttp:         
No such file or directory (error 2)                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-531

Pause in 505 Ent IPU: ccs post-configure fails for Atlasadm     
/etc/conf/cf.d/mdevice: No such file or directory (error 2)...  
source line 1 of program << BEGIN {entries = 0 ...>> expr:      
syntax error /opt/K/SCO/Atlasadm/1.4/cntl/packages/Atlasadm/ccs:
test: argument expected                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-532

Pause in 505 Ent IPU: can't find /etc/conf/bin/idinstall        
find "/etc/conf/bin/idinstall" to execute, Error info logged    
to: /tmp/tclerror.12332.log, Press Enter to continue            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-533

Pause in 505 Ent IPU: /etc/conf/cf.d/link_unix: not found       
link_unix: not found, Error: kernel link failed."               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-568

syntax error messages at startup on French/German version       
libc: setlocale: LC_CTYPE:LANG=syntax error in /usr/default/lang
libc: setlocale: LC_TIME:LANG=syntax error in /usr/default/lang 
...                                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-587

Upgrade fatal symbol referencing errors; link-edit of unix fails
relink at 87% installed.  Screen of messages scrolled by like,  
NWfsHashName  /var/opt/K/SCO/link/1.1.1Eb/etc/conf/pack.d/NWnf/ 
Driver.o & similarly NWfsFreeServerNode .../pack.d/NWnf/Driver.o
i386ld fatal: Symbol referencing errors.  Kernel link failed.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-528

Pause in 505 Ent IPU: "Fatal error can't cd to /etc/sysadm.d..."
change working directory to /etc/sysadm.d/SCOadmin.ts/          
Filesystems (or System, or System/Security): No such file or    
directory.  Error info logged to: /tmp/tclerror.28878.log"      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-554

Intl. Manager breaks trying to enable Euro dollar symbol support
C.  Use Intl Settings Mgr to select ISO8859-15 internal code set
required for display of the Euro dollar symbol; but when click  
OK, the "Keyboard" widget entries disappear.  ISO8859-15 shown  
as new code set but can't save settings without keyboard choice.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-416

Error during upgrade from 505 to 506, but it is not in 504      
checking file permissions...                                    
Here is the message: ln:/hdFS/opt/K/SCO/SoftMgr/1.0.2a/custom/  
upgradeTools/custConvert: File already exists.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-236

OSr5 vulnerable to SYN flood DOS attacks                        
fixed in UW7.  I have the mods.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-262

stop in 5.0.5 to 5.0.6 upgrade - lk_config.sh script            
/opt/K/SCO/link/1.1.1Ga/cntl/packages/LINK/lk_config.sh: test:  
argument expected.  Fix by putting double-quotes around shell   
variable references in test arguments.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-553

No Euro dollar symbol support in 5.0.2/5.0.4 German Ent upgrades
The Internationalisation Manager does not list the ISO8859-15   
internal code set required for the display of the Euro dollar   
symbol.  Don't have results of French or other upgrades yet.    
(Fresh installs list ISO8859-15 code set but can't configure it)

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-608

Netscape Communicator - boot into init2 spews tcl error.        
down causes the message: Error: Host not found, try again.      
and then a bunch of tcl stack including: "lindex [exec /etc/host
$host]..." and also "file /usr/internet/ns_httpd/admserv/update.
admconf" line 12.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-745

Non-fatal verification errors appear during install             
Unable to determine group id value for group "ppp" on file      
"./opt/K/SCO/mstppp/2.1.4a/.softmgmt/var/usr/lib/mstppp/lock".  
Using default gid of 2                                          
So far this only happened on one out of two tested machines.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-744

Wrning box appears during install referencing 5.0.4, shld be 506
warning box will appear describing the dangers of using two     
PPP implementations at once.  The warning box references        
OpenServer 5.0.4, and should be changed to 5.0.6, or even       
`uname -v`.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-263

pool ranges in aasd can wrap around                             
not check to see if X is greater than Y.  If it is, aasd will   
try to wrap all the way around the address space and allocate   
memory for every address that's *not* in that range...          

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-269

scoadmin backup only works for root                             
5.0.5 to only be writable by root, per SCO-245-427.  However,   
this prevents non-root users from accessing filesystem lists,   
which in turn means users with backup privileges can't run      
backup.  Need to restore original 666 permissions.              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-592

Unable to access files under cgi-bin via lynx or communicator   
to access any files in that directory. Stopping and restarting  
the server makes no difference.  This was tested in BL4.1 and in
BL4.0c and worked without error.                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-411

SCOadmin backup fails to backup remote filesystems.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-502

Account manager can't move files from old account to new account

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9760

starting acct mgr as unauthorized user creates spurious syslogs 
/usr/adm/syslog will contain one arcane Tcl error message for   
*each* line in /etc/passwd.                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-276

killing netconfig can leave /etc/tcp broken                     
"modify protocol configuration".  then go back to the scoterm   
and hit ^\, and kill -9 the vtcl daemon.  /etc/tcp will contain 
the line "ifconfig -p net0  netmask  broadcast  perf..." -- all 
the addresses are missing.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-535

IP, Netmask, Broadcast entry fields picking up bogus information
install-time. Add NIC (Intel Pro 100). Add TCP/IP. Window "SCO  
TCP/IP Configuration": Field "IP Address" displays word netmask 
Field "Netmask" displays word broadcast.  Field "Broadcast      
Address" displays word perf.  (see attached for more info.)     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-796

Function keys string mapping file missing for ISO8859-15 codeset
internal & console codeset.  Reboot.  Login on console or any   
multiscreen; default TERM is ansi-iso15.  Accept and get error  
mapstr: /usr/lib/keyboard/strings.d/ansi-iso15: No such file or 
dir.  One obvious result: left cursor goes right and vice-versa.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-763

Upgrade pauses due to missing argument for lk_config.sh script. 
82% complete with message, /opt/K/SCO/link/1.1.1Ga/cntl/packages
/LINK/lk_config.sh: test: argument expected.  Look at /hdFS/opt/
/K/SCO/link/.../lk_config.sh.  Requires Input: $1 = pkg_keywords
passed from ccs script.  Does this relate to bug SCO-559-762?   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-851

IPU is failed and error returns                                 
upgrade from the IQM, it returns an error message:              
"Can not determine root filesystem location".                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-534

Pause in 505 Ent IPU: ".../backupOSA/ccs: Bad system call"      
cntl/packages/backupOSA/ccs: 13058 Bad system call, Press       
Enter to continue."                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-769

scoterm aborts when ISO8859-15 codeset and non-C_C.C locale used
Settings Mgr & reboot.  Scoterm no longer runs.  Toggle codeset 
back to ISO8859-1 & start a scoterm.  Then re-select ISO8859-15.
Type scoterm at command line of existing scoterm to see X error,
Warning: locale not supported by Xlib...  Attachment shows error

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-880

Configured 2 NICs, 2nd NIC picked up bogus TCP/IP parameters.   
NIC was not on the Net.  Viewed the networking parameters in    
netconfig. Output as follows:                                   
IP address: netmask     Netmask: broadcast                      
Broadcast address: perf                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-902

An error message find in host system (all locale) after reboot  
for input: syslog/udp:unknown service" is found in host system  
(any locale) machines after reboot from installation.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-915

Inet mgr provides root exploit (effective Low security profile.)
attached to the change password box in the inet mgr.  This      
problem can be taken advantage of to run any command as root.   
The inet mgr password is available in encrypted form to any user
Effective sec. profile is LOW. Also in 5.0.5.  See attachment.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-961

secdefs reports 1 discrepancy after IPU w/ improved profile     
secdefs -v and it reports 1 discrepancy with improved level     
security: HOME_MODE in /etc/default/accounts equals 755, but    
secdefs says it should equal 750.                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-923

/usr/internet/admin/access/.htpasswd world-readable             
Users can read it and run a cracker to get in to the inet admin 
account and mess things up.  Does this file really need to      
be world-readable?                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-979

error in opening screen of Inet Mgr                             
you get a "Mana Load Error".  tcl error output basically says   
no such variable "DEFAULT_FILE", invoked from                   
"DefaultFile:GetValue $DEFAULT_FILE ...", invoked from within   
"ipRoute_get".                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-984

sysprof ELF 32-bit binary runs on 5.0.5 but not upgraded 5.0.5. 
OSR 5.0.5 w/UDK Compatibility Module.  It no longer runs once   
5.0.5 is upgraded to 5.0.6.  Seems to interpret each argument   
as a file name, "./sysprof -p -f log /" gives "Could not stat() 
file -p", repeats for -f, log.  Also Error walking / dir tree.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-955

Internet Manager has 2 broken http links.                       
Found 2 broken links: 1) Internet Resources for SCO Systems     
                      2) Interesting and Useful Links           
Traversing both links give "Page Not Found" status.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1021

Error returns while setting file permissions                    
permission. At that time, ISL(IQM?) returns a warning message:  
Setting file permissions... chmod: WARNING:                     
can't access /var/opt: No such file or directory (error 2)      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-985

custom verify of upgraded 5.0.5 system shows 119 discrepancies. 
custom Software-->Verify System-->Thorough reports 102 files    
with a total of 119 discrepancies.  About 6 binaries show wrong 
size/checksum.  Ran custom verify on base 5.0.5 system before   
upgrading (16 total discrepancies all fixed).  See attachment.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-97-1082

Behavior and assumptions of .forward & .maildelivery differ     
different behavior with respect to the way they access their    
respective control files.  This is confusing and apparently     
poorly documented.  Should be fixed, or *at least* documented   
more thoroughly.  Usenet posting is attached with details.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-359

Some created windows are insensitive to user input              
the destruction of another window's shell. The Motif VendorShell
destroy method should re-add the new windows' shell to the grab 
list, but this doesn't happen; thus, no input.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-207

End of ct(C) man page incorrectly references cartridge(HW)      
tape) driver, but for the call terminal utility.                

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2108

cu does not check the return from write in _dopercen            
lines longer than around 250 chars (reproduced by creating      
a file containing 300 chars on local system, and ~%put-ing it   
to remote system) connected over tty1a (COM1).                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-311

inetd grows without bound, can crash system                     
services cause inetd to grow, eventually consuming all system   
resources.  Caused by calls to smp_check_user().  It looks too  
difficult to fix that, so suggest workaround of making these    
services like the others, fork, grow, then die.                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9279

PPP: Errorneous error message: getppphostent: no local host ID  
PPP. This message is sent even when successful login occurs,so  
is misleading to the user. "getppphostent: no local host ID,    
can't get passwd for local host". Please modify error message   
so is relevant to situation, document it , or remove it.        

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2281

tftp command causes core dump (Memory fault)                    
at the (to) prompt.  core dump.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-246-83

With Compaq smux agent, in.smpd dumps core                      
MR ul97-01510 and ul97-21808, which ships in PTF3283. Very impor
tant to Compaq. They also want it to work on ODT3 but OS5 is    
top priority.                                                   

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2546

syslogd strips high bit on 8 bit characters                     
e it removes the high bits from any message sent to it.         
See line 512 in .../cmd.os/syslogd/syslogd.c                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9763

modifying tcp/Ip protocol node name/IP puts dup in /etc/hosts   
replaces existing entry in /etc/hosts. causes RPC error on      
next reboot                                                     
missing fnality in /usr/lib/netconfig/init/sco_tcp not cleanup  
old value from /etc/hosts if replacing.                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9797

strftime uses not account for y2k rollover                      
with option %y. rollover to 00 in y2k. shld go to %Y            
minor problems in unused code (license) or machine generated    
and used config files                                           

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1399

lpadmin -p printer -A none corrupts printer setup               
i.e. doing lpstat -t will give back an error - and the easiest  
way to fix it is to remove the printer and re-create it.  This  
only happens on 5.0.5 - not 5.0.4                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9833

some calls in ps may fail (ioctl) but are not checked           
their return values are not checked                             
(reported as prob on quad processor system generating           
RDUBLK: cannot get userdate (errno=6)                           

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1281

Too many printcap entries causes corruption in "lpstat -v"      
attached), "lpstat -v" displays corruption in output. This is   
due to bp buf (pbuf)being only 512 chs(rlp/common.c).buf used to
accumulate 'rp' and 'rm' strings. Before long, this falls off   
the buf end. rlp/printcap.c(tgetstr-"No checking on overflow")  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9664

lpsched stops scanning for printers if missing file             
containing a file "configuration" - if it finds  subdir but not 
the file it doesn't search the rest of the printers dir.        
also possible problems with rlpconf and lpadmin -x              

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1097

scohttp does not conform to HTTP/1.0.05 and HTTP/1.1.07 standard
in HTTP-response header must be ended with CR,LF codes,         
but scohttp only sends an LF.  If you replace scohttp with a    
conformant httpd (such as Apache), 'man' falls over because of  
the extra CR at the end of the http header.  'man' needs fixing!

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-8989

Osr5 needs terminfo and scoterm mods for UW/Gem interoperation  
for interoperability with Unixware and gemini systems (rlogin)  
(Scoterm set TERM=scoansi, ditto console)                       
In addition scoterm needs modifying to suppport capabilities    
hpa and vpa for use as ansi from Unixware (UW ansi sets these)  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-41

Need at386-ie for termcap/UW compatibility work                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9444

Traversed hotlinks are not de-highlighted, leaving no history   
links are not de-highlighted so you have no idea where you      
have already looked in the doc, your history is not preserved,  
can't find any option that will change this.  This was not the  
case in 5.0.0 but may have been introduced in 5.0.4.            

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-180

pkgadd doesn't allow install from /dev/fd0                      
There are entries for /dev/fd0135ds18 et al, but not for the    
generic device name, which is what most people use.  This should
be added.                                                       

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2480

ftp client doesn't support passive mode                         
client does) as do both the OSR5 and UnixWare ftp servers.      
Passive mode support in the client is necessary for firewall    
friendly FTP as detailed in RFC 1579.                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1142

Using sane in gettydefs  does not clear the CLOCAL mode as doced
r respects the value of CLOCAL set by the sio driver.  The doc  
indicates that sane does in fact clear CLOCAL.  Customer indicat
es that on other UNIX platforms, sane clears CLOCAL.            

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1517

sixth field of gettydefs entry is not utilized properly         
program field can read by getty from the gettydefs file. This   
field should execute in place of login. This works in 3.2v4.2 & 
5.0.0, but not in 5.0.2 - 5.0.5.  It appears as if arguments are
not being properly passed to the program to execute.            

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9848

pkgadd system needs the menu and pfmt utils fm UW for scripts   
for user input. These should be available on osr5 to remove     
need to redo install scripts differently for the this platform  
(cf HDK).                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9846

trace aborts with assertion failure on bins with dup DLLs       
it aborts with asertion failure                                 
Assertion failed: current_dll < num_dlls, file dll.c, line 335  
DLLreadsyms() in lib/dll.c not checking for handled filenames   

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1525

/bin/sh does not use OPTARG variable properly with getopts      
encountered and the optstring has a colon in front of it, OPTARG
is set to the value of the illegal character. This works in ksh,
but fails to be set in sh.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-8765

possible security iss. in nat. lang. support                    
rmed are informed. if you want the details, contact osd mgmt    

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2564

Process Manager dies when adding attributes to be viewed        
left hand Available list and add them to the selected list,     
click on OK and you get the error:  Fatal error: can't read     
"psAttributeLabels(Pid)": no such element in array Error        
Information logged to: /tmp/tclerror.1886.log                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1534

when running /etc/nfs stop, the nfs script kills vfslockd       
running /etc/nfs stop will read from PROCS variable to determine
names of processes to kill. This method happens to also kill    
the vfslockd process needed by VisionFS. Puting spaces between  
each process name in the PROCS variable should correct this.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1535

what utility cannot find files if dash is second character      
has a dash for the second character. For example: b-user.txt    
what will hang looking for this file when specified as          
"what b-user.txt" . "what ./b-user.txt" will work correctly,    
however. This occurs in directories that are in the PATH as well

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-34

cpio -i overwrites files that it claims to have "skipped"       
a file "exceeds ulimit".  It then claims "file skipped", but in 
fact overwrites the file with an empty file!  Are there any     
other reasons cpio might decide to skip (but whoops -- first    
overwrite) a file?                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9861

dropped chars with MC? emulating 16550 UART (ApplSvr)           
chars in a stream rather than from a 16 byte buffer. The SIO    
driver overwrites its internal Read buffer trying to keep up.   
Fix by pushing up buffer size in siohw.h                        
SIO_RCACHEMASK (fm 0xFF to 0xFFF)  (courtesy johnw)             

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9850

trace coredumps on binaries containing dup DT_NEEDED entries    
 Assertion failed:  current_dll < num_dlls, file dll.c, line 335
when binary has duplicate DT_NEEDED entries                     
hops has code fix (this bug so can check fix into tree) dll.c   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9863

/etc/rc2.d/S85tcp and /etc/tcp setup PATH with /usr/etc         

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-102

html2ascii dereferences NULL                                    
Then run `man cat`.  Kernel message "Invalid reference to       
address 0 by PID 22117: html2ascii (eip=0x80019D11)             

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-108

vi dereferences NULL on global search-and-replace               
vi some file.  Do ":%s/^/x".  Kernel message "Invalid reference 
to address 0 by PID 22861: vi (eip=0x80019D11)"                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9867

crontab -e won't run with std EDITOR env var setup              
it using a PATH lookup. crontab -e does not - it demands a      
absolute pathname or fails with                                 
could not exec the editor.: No such file or directory (error 2) 
UW7 (and most other Unices) does not have this restriction      

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-6

PPP manager "Edit Login Script" window rather klunky            
You start with two existing lines, neither is selected, must    
figure out to select one before can modify it.  Subidiary window
"Modify Expect/Send Pair" doesn't accept Return for [OK].  etc. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9426

NULL dereference by html2asci                                   
NOTICE: Invalid reference to address 0 by PID954: html2asci     
(eip=0x0804D67A)                                                
This is post-Auriga NULL dereference fixes.                     

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2844

scoterm does not understand mptys options                       
returns a usage message, which includes mptys.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9885

tty line disciplines should be more sensible about Del/^H       
erase characters. A default disabled tty local flag set         
by stty enabling interchangeable erase char wiuld be nice       
hops has implementation.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9841

scohelp doesn't handle HTML comments correctly                  
i.e doesn't handle                                     
see libhtmlw/HTMLparse.c get_mark()                             
needs to count '<' once in comment and backout to corres '>'    

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2323

#!/bin/ksh + more than 256 spaces fails to execute.             
sh is : 'arg list too long'. Space characters are added to the s
cript by some of France Telecom's utility and didn't cause a pro
blem under 3.2v4.0. Now they are upgrading to 4.2, they would st
ill like to have backward compatibility.                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9847

file does not identify ELF binaries as stripped or debuggable   
given on COFF files).                                           
I have a version that does - needs to go in base system         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1548

cat $SHUTDOWN in line 193 of /etc/shutdown is incorrect         
if $SHUTDOWN exists the message says something like "Shutdown   
started at: cat $SHUTDOWN"                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9868

su -c ignored, no error                                         
-c cmd to specify a cmd to run. THis is expected by some apps   
to be portable and is used in shell scripts.                    
OSr5 su ignores -c xxx but  does not provide an error diagnostic
for compat we should make su handle this option.                

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-68

"/etc/dumpsave: error: not found"                               
the source.  /etc/dumpsave says "trap error 1 2 3", but there is
no program or function named "error".                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-702

ftp_putfile will destroy file descriptor 0 upon the first call. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1564

stty command in .profile stops execution of .profile            
problem is that a command 'stty rows 30 cols 75` in .profile    
causes the rest of the .profile script to _NOT_ get executed.   
This is not quite the same as the windows resizing issue also   
fixed in oss497b/a.  Hops fixed in tree, but need new 497c.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1550

Loading a pkg with pkgadd under rs505a - fails to find useradd  
OSr5.0.5 they load ok. After rs505a has been installed, their   
scripts fail to find some binaries (e.g. useradd). It seems that
the path to /etc has been lost. The same package loads ok under 
UW7.1. A small example package is available to test.            

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1412

xserver denial of service attack                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-555

scanon & scanoff do not work if given a ttyname argument.       
ttname=`echo $1 | sed 's:/dev/::p'`                             
needs to be changed to:                                         
ttname=`echo $1 | sed -n 's:/dev/::p'`                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9987

extensive buffer ovfl problems in suid programs                 
security alias ( see attachement)                               
xload, xterm/scoterm, xmcd, xlock, xscreensaver, scolock        
sar, cancel, lp, reject, sd, doscat, doscp, dosdir, dosls,dosrm 
dosmkdir, dosrmdir and  ati (uucp)                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9997

more security exploits - lp -o, ftpd + lp -Llive=               
ftpd to create var/spool/lpd/lock file then use lp -Llive=/files
to overwrite ~/.rhosts                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-322

rlp does not conform to rfc1179                                 
rlp must use ports 721-731, inclusive, as the source port.  Ours
starts at 1023 (IPPORT_RESERVED - 1) and works down, possibly to
0.  Also our lpd accepts any port 0-1023; which it must, to talk
to our old version, but should have option to do the more secure

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1585

lpd/rlp checks for incorrect fcntl() return value               
                if (errno == EAGAIN)    /* active deamon present
Needs changed to EACCESS.  This prevents:                       
lpd: fcntl: lock: permission denied message in syslog and       
may help lpd from skipping jobs.                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9999

security vulnerabilities in init scripts                        
Since its deterministic what the pid numbers will be these files
could be used to create/overwrite files that should not be      
fix with explicit silent removal before use.                    
see script list in attachment                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9998

security holes in xlibs make x utils/clients exploitable        

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-206

SECURITY: userOsa overwrites group "auth" files                 
file "./debug.log", which can be spoofed as a symlink to a file 
owned by group "auth", such as /etc/shadow, with catastrophic   
results.  This is an interaction between the fact that userOsa  
is setgid, and Tcl default behavior.  **Other OSAs same problem?

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-61

buffer overruns in su and ping                                  
ping `perl -e 'print "a" x 2056'`                               
After the successfull exploit su gives instant root shell       
ping gives a shell with filesys privileges                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-58

X server security hole - can print out first line of /etc/shadow
ert@sco.com, From: Brock Tellier              
Xsco -indirect $BIGBUF  (and probably other places, also present
on OpenServer 5.0.xin -query $BIGBUF).  See attached email.     
/usr/X/bin/Xsco -indirect -config /etc/shadow                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-100

prototype for bufsplit in libgen.h is wrong                     
on UW7                                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-62

Osr5 does not suport Wheel mice - it needs to                   
Also need modificatiuons to event handling, eventlibrary(?)     
and mouse aware apps ( Xserver, usemouse, scosh(?)              
uw7 also has additions for mouse autodetect                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9871

uname output needs to change to 5.0.6 for freedom               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-101

scoterm coredump when invoke edgemenu                           
scoterm -e /usr/lib/edge/bin/edgemenu causes scoterm coredump.  
( not reproduce exactly but intermittant with longer cmdline    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1604

default/sample sosco uucp entries are now obsolete              
(cu, uucp) access to sosco.sco.com/sos.sco.com on 10/06/99.     
This makes the default /usr/lib/uccp/Systems entries for sosco  
useless and obsolete.  These should be removed in 5.0.6.        

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1465

remote printers are listed twice in after oss497c is installed  
are displayed twice                                             

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-118

sadc collection of more than 1 record in a single run is broken 
2972-byte records; sar does not anticipate this and doesn't find
the records.  Extra write is "write(fp[0], &maxlatch, sizeof(   
maxlatch));".  Causes `sadc 1 5 sadc.out; sar -f sadc.out` to   
fail (3.2v4.2 succeeds).  More details attached.                

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2783

Write to master ptty returns EINVAL when slave closed           
will get EINVAL on write to master ptty. Wouldn't EIO be        
better ?                                                        

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2847

/bin/mail (mailx) adds a date header which is non-RFC 822 (5.1) 
code to the end of the date header.  In non-American timezones  
this should be +0100 format instead of BST according to RFC 822 
Using a non-standard format (such as this) confuses MS Exchange 
when it tried to calculate the time the received mail was sent. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-202

Security vuln. bufer overflow in popper.c                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-102

charm barf is suspend when no dialog displayed                  
work around is to leave one dialog open, and do the destruction 
after the suspend - should not be necessary.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-219

ksh shld be configured  to enable cmdline editing if interactive
support. Default configuration (profiles) should enable this    
by default when running interactively.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-209

UW7 identified security issues in pkg* tools - bfr ovfl         
see www.pd.london.sco.com/stg/documents/security_mrs/ul99sw.htm 
MR's ul99-{19306,19308,19310,19342,19315,23503,13904}           
 pkgcat, pkglist, pkginstall, pkginfo, pkgparam, getrange       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-234

cannot suppress syslogd from listening on network sockets       
syslog with bogus external log info                             
Add switch to suppress (enable) remote socket access            

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-182

Need to provide a utility to manage Proc. SNs                   
provided a utility to diable the PSN.  We need to deliver it in 
SCO product.                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-232

ISL mouse selection list should be updated to indicate wheel    
event/devices descriptions () SCO-559-213                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-231

Installing Base OS indicates version 5.0.5Eb during ISL         
THis is first rev of 5.0.6 expect either something corres to    
BL or all Aa                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-95

Syntax of relational operators in awk contradicts book example. 
NF == 9 && /^-/ { ...                                           
This fails to work. Instead...                                  
/^-/ && NF == 9 { ...                                           
is a workaround.                                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-266

$HOME/.Xdefaults-hostname no longer works                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-246

Should at least enable kernel null-deref warnings for Beta      
systest ( and fix any messages that ensue) and maybe turn on    
null-deref coredump (or at least leave enabled the warnings)    
flag.                                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-307

PPP driver does not get linked into the kernel                  
manager, one must kill the process, and the driver does not     
get added nor one knows in what state the driver is, becuase the
kernel was never relinked.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-259

admin cannot change default controlchars before login.          
For console (single user) login these are adjustable by change  
values in /etc/syscon.ioctl but there is no way post built to   
change these for user defaults. wired in uucp/getty.c code.     
shld be overrideable fm gettydefs or other. I have mods.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-284

elf as thrashing HD unnecessarily - bad slowdown                
see mail trail in attachment. Removing msync()  speeds as up    
by as much as 30% (creating many small files).                  
unixds/src/usr/crc/cmd/sgs/as/common/objf.c and                 
sgs/libelf/common/{input,output}.c                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-304

Anything built in Netos reference libgen uses native system lib 
to build lines and some -L switches, There is no libgen.a in any
of specified -L paths so ends up using libgen from /usr/lib     
instead of a current version fm build supp(not there either).   
or unixds. ( see pwconv for example)                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-305

pwconv makes /etc/shadow with 7 field entries instead of 5      
than docced 5 fields. End of structure overrun.                 
Problem is in putspent() in libgen.a - code is just broken      
lib/libgen/getspent.c. prob unseen b4 due use of native libgen  
code in libsec/getspent.c OK but not used (libsec.a)            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-265

/etc/shadow is a symlink to a non-existent file                 
"unable to create temporary password file"                      
ap -r -v olduserlist lists all existing accounts but does not   
add any new ones, fails with                                    
"unable to update password file"                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-339

post install /etc/{passwd,group}  are files not SSO links       
create_files_securely(). Does cp/rename which breaks symlink    
Correction to libprot and apps using to support symlinks prob   
too widespread. Better to adjust pkging so these files are      
PRIVATE and ccs scripts 'export' them as real files. see attach 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-381

default config give local users write access to snmpd info      
localhost.                                                      

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1410

xserver denial of service attack                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-243

busmouse.pkg, kbmouse.pkg contain extraneous garbage            
Netos/usr/src/cmd.os/cdmt/) contain complete (but increasingly  
obsolete) copies of drivers.pkg.  Looks like edited version of  
drivers.pkg 55.3 was checked in as *mouse.pkg 57.1; sporadically
maintained since then.  Remove all but mouse-relevant parts.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-391

SNMP access default enabled/readable shd be explicit choice     
gives access with common community strings. Exposure of this    
info is probably better an explicit admin/config decision       
securitywise. Mod default config  to disallow all read access ??
Good candidate for Services Manager.                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-277

Can't install packages uccs, ucplus, and ustdcomps in UDK CD    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-392

tgetent() buffer max size is 2K. many utils still use 1k        
see (partial?) list in attachment.                              
Note: apps ok if linking against curses or tinfo not if         
link against termcap or termlib                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-386

Security hole: root's allowed access even if .rhosts perm >600  
for root are anything > 600 , then access should be denied      
for root, however, this is not adhered to. Perms can be         
644 or even greater for .rhosts and root is allowed in.         
This is a security hole, thus the high severity                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1569

ftp client AUTH command on connect results in server disconnect.
command on connect in case connecting to server that            
disconnects on receiving AUTH command (e.g., AIX MARK III);     
5.0.0 and earlier ftp clients don't issue AUTH. Server          
disconnect on AUTH is RFC compliant.                            

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1413

rshd security problem.                                          
can be found vi ftp on stingray.pd.london.sco.com               
pub/stg/ssesrc/SSE020                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-438

cc link die with /usr/ccs/bin/elf/ld core dumped with signal 11 
add_exports_to_dynsymtab(). deref past end of symbuckets table. 
loops <= NBKTS rather than < NBKTS - 3 occurrences.             
corrected in UW7 ld and changing allows above to link w/o core  
see UW7 /vobs/unixsrc/usr/src/common/cmd/sgs/ld/common/syms.c   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-299

"sar" command line utility fails from corrupt sadc utility.     
stating that sadc does not exist.  The next iteration of the    
"sar_enable -y" command yields the following message:           
sadc: cannot create file  - permission denied                   
Running "sar" gives blank output to the screen.                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-497

kill -H flag not documented and/or not functioning.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-520

mouse will not click correctly or change handedness             
unchanged mouse will not click correctly and appears to detect  
random clicks events                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-451

output from "mpstat" not formated correctly(scoansi/Xdesktop)   
formated correctly. seems like scoansi term setting can't handle
mpstat format. have to fire off an xterm, then run mpstat.      
however, running mpstat in charm mode using scoansi settings    
does function correctly.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-231-490

tput dumps core when parameter>4095. reads string as numeric    
4096 dumps core. TERM=wy60ak tput pfx 11 4095 does not dump core
so entering date syntax as parameter dumps core. tested: tput   
pfx  '409x'. date string is interpreted at its numeric 
value rather than as date variables when syntax is correct.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1545

Printer manager chokes on rp= mnemonic in /etc/printcap         
retreive data from a remote printer who's rp= mnemonic in       
/etc/printcap has been edited by hand, or when the rp= value    
differs from the client printer name.                           

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1406

oss497a breaks scoadmin printer if LANG is not set to C         
This only works if LANG=C. If LANG set to anything else then    
no printers are displayed in the printer manager. See also      
SCO-236-1425/ SCO-236-1426/ LTD-245-2812/ and erg710664.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-243

scoadmin serial hangs on exit without kernel relink             
Could be related to other Serial GUI hangs                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-237

NFS panics kernel if mount filesystem with rsize or wsize < 512 
smaller than 512.  Looks like it will also panic if either is   
larger than 8192.  These calculations need to be reworked.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-295

2 printers get added when configuring a remote printer.         
two equivalent printers. If one is removed, the other one cannot
be remove. Simply selecting it displays the message:            
Unexpected error: can't read "printerArray(printer)": no such   
element in array.                                               

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1455

"dhcpd[21292]: rtmsg: No such process" error from dhcp server   
in syslog file.  According to Dewi Morgan "dewim" this should   
be bugreported as it may cause problems with some DHCP clients  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-350

NFS: unable to mount with -o hard option                        
It fails with error, " mount:  invalid NFS option: hard "       
Both soft and spongy mounts work okay. Docs say it is supported.
GUI manager has it as the default. But cannot use it manually   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-406

HDK 7.1 - can't build Unisoft Test Suite (UTS) on 506.          
developers to develop X drivers.  You must first install        
UODK 7.1 OSR5compat and xdevsys packages.  Then install xtests  
from HDK 7.1.  When you try build the UTS, it fails cause libXi 
is missing. Once libXi is there, it builds but won't run right. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-573

MS IntelliMouse is not setting the kbmouse driver               
error: Check mouse configuration".  The IntelliMOuse option is  
not setting up the kbmouse drive rinto the events file for the  
kernel rebuild correctly.                                       
See attached file for further details of test....               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-576

Wheel button functionality does not work, no scrolling up/down. 
whether the mouse is configured during install or after install 
as either High or Low -resolution Kbmouse.                      
After install, hwconfig -h does show a Keyboard|PS/2 mouse      
(wheel)                                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-226

/var/opt/K/SCO/Unix/*/var/scohttp/logs world-writable           
/var/scohttp/logs, which is a symlink to /var/opt/K/SCO/Unix/*/ 
var/scohttp/logs.  The real directory at the end of the symlink 
is 0777, must be 0755, otherwise cracker can make a symlink     
there to overwrite any file in the system.                      

     ----------------------------------------------------------------------

Bug-ID:     DAV-2-17

PC-Interface Server listed as optional product on help screen   
configuration package and PC-Interface server is listed.        
PC-Interface is not listed on the actual product selection      
pick list.                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1664

Would like to have Sysinfo utility included in 5.0.6            
the system and builds a report in either html or text           
It is also capable of capturing a live system dump very similar 
to Bela's erginfo script.                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-594

Changing speed of port to 115200 causes warning message.        
line-mode label to q, and the following warning appears on the  
window the command was executed:                                
Warning: DtComboButtonWidget: Invalid selectedPosition resource 
(defaulting to 0).  Doesn't affect the performance of the port. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-777-599

UX:acomp: ERROR: Bad fp op at file: costing.c line: 177         
$ cc -c -O ddproc1.c                                            
Bad fp op at file: costing.c line: 186                          
error: Process /usr/ccs/lib/acomp core dumped with signal 6     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-388

getmany reputed buffer overflow, hostmib incorrect value        
getmany not handle v long OID strings )( bfr ovfl? libsnmp ?)   
mkdev hostmib setup incorrect OID in etc/snmpd.peers vs         
mib compiled OID ??                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-508

get error message when changing speed of port using mkdev serial
38400, this change automatically selects the Line-mode label to 
"o", these changes result in the following error message in the 
window where the mkdev serial was invoked: "Warning: DtComboButt
onWidget: Invalid selectedPosition resource (defaulting to 0).  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-629

pkgtrans needs more obvious way convert pkgds to pkgfile        
pkgtrans in.pkgds ''                                            
Not that you'd work it out from doc or anything else            
Shld support soemthing more obvious like                        
pkgtrans in.pkgds . and provide as doc example ..               

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1681

changes to /etc/sysinfo utility, security hole fixed            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-257

SECURITY: `cron` starts processes with a path starting with "." 
colon makes the resulting shell search the current directory    
first, before /bin etc.  The man page claims the path is        
"/bin:/usr/bin:/usr/lbin:", searching the current directory     
last, which is much safer (and matches other Unix releases).    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-649

"Open Desktop" text exists in ScoTerm app-defaults file.        
/opt/K/SCO/BaseX/5.1.3b/.softmgmt/var/usr/lib/X11/app-defaults/ 
msg/ScoTerm     /var/opt/K/SCO/BaseX/5.1.3b/usr/lib/X11/   
app-defaults/msg/ScoTerm                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-681

create empty /usr/local/{man,bin,lib} dirs in Unix base pkg     
as part of the stock distribution so installing 'freeware'      
doesn't blow up  for lack of a place to dump their man pages.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-639

snmpd logs "init_communities: Config error with:" to snmpd.log  

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1458

syntax error in /etc/init.d/cron                                
that the "/etc/init.d/cron stop" will never work.               
There is a double-space in the pid= line between the carret ^   
and the asterisk *  that once removed makes the script work     

     ----------------------------------------------------------------------

Bug-ID:     SCO-777-600

invalid register for instruction: %ax in testb                  
/tmp/ctm5DAAa004Xg:20833:invalid register for instruction: %ax i
If -belf is not used, you get "aline 19743     : Syntax error"  
This doesn't happen in 5.0.4, so we must have added this        
problem in 5.0.5                                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-685

dlpi.h has unprotected #ident, causes warnings with -w3         
(or -Xc) due to unprotected #ident line                         
/s/osd/lli/usr/src/lli/sys/lli34/s.dlpi.h - shld become like    
#ifdef __STDC__\n#pragma comment(exestr, "%Z%head.sys:%M% %I")\n
#else\n#ident        "%Z%head.sys:%M% %I%"\n#endif              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-720

Output in the hw and hwconfig commands does not identify PIII's 
commands the output from uname -X (Machine=) is incorrect.      
Pentium PII's are correctly identified it is only PIII's that   
are not.                                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1696

Minor changes to sysinfo utility                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-747

add /dev/null to the default list of devices in printer manager 
devices in the Printer Manager.  With the proliferation of netwo
it seems like 95% of the printers I create use /dev/null        

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1445

security hole in login                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1671

a 5 year old bug has not been fixed yet SCO-236-225             
customer just re-reported it and is somewhat peeved...          
This was re-verified on 505 by carmelom                         
Details are attached to this bug report.                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-225

Fails if invalid & valid ttys given in the same invokation      
ttys, depending on what order tty names are given in.  See      
attached transcript.                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1699

Updates to /etc/sysinfo                                         
changes                                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-714

rmuser username from command line does not work                 
created.  ale: Error occured so no updates made to /etc/passwd d
database.                                                       
You can delete a user from scoadmin menues.  authck reports     
nothing wierd.                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-563

Installation help mentions PC-Interface product                 
PC-Interface in the help for both the standard enterprise       
and lightweight configurations.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-524

Some (Fast?) systems do not detect PS/2 mouse correctly         
to find it.  Driver detection code seems to be doing all right  
things but failing as if mouse not there.                       
Timing/register settling problem ??                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-470

update binhexed libvtcl.a in dosm/usr/src/xtra/suppds/lib b4 FCS
(dosm/usr/src/xtra/suppds/lib) with a previous nights built     
version from X11/WidgetServer/ms/wstcl.                         
shortly before the FCS build                                    
(also update vtcl.h in ../usr/include/vtcl                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1582

The of= function of /etc/printcap does not work.    
filter to /usr/spool/lp/admins/lp/filter.table. He then added   
a line to /etc/printcap of;  of=   rlpconf was used 
to add the parallel printer through the network print server. He
was able to print but the filter info was not implemented.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-444

Error message alignment problem in incorrect mouse configuration
ISL, I got the error message "Open event driver failed. Fatal   
server error: Check mouse configuration." The message is totally
out of alignment.  In addition, I can't go into any terminal and
run 'mkdev mouse' to fix this problem.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-690

click away in verious managers and you get a vtcl error         
SNPM agend > stats > active endpoints the attached vtcl error   
appears                                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1702

Various changes to /etc/sysinfo utility                         
added reporting of Tarantella, VDM and additional command file  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-632

Hitting the Help button on ScoLogin screen kills login screen.  
a standalone help screen, X/login session dies leaving a blinkin
g curser to the far left of the screen.  Happens in BL4.2.      
Does not happen in BL4.1.  Also the help screen in BL4.1 still  
references to Open Desktop. Should be changed Open Server.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-317

Missing scologin prompt to "Please try again" after failed login
and/or password are incorrect.  That prompt is informative.     
Usability.                                                      
/usr/lib/X11/scologin/Xresources has scologin*try_again entry   
with correct message.  Not being called.                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-580

Bitstream 18, Dec 24, Lucida 26, Lucida 28 fonts dont' display  
window, Bitstream 18, Dec 24, Lucida 26, Lucida 28 causes mpstat
utility to display the line characters "______" as extended     
ascii codes 154, 142, and some other weird character.           
See file for more information on this...                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-683

Defering password during ISL causes X to hang upon login.       
login.  Xserver dies.  A window should pop up & prompt the user 
to enter in a password & reenter in a password.                 
/usr/lib/X11/scologin/Xresources at line 166 has entry for      
this window(scologin*pwd_1_lb.labelString:   Enter New Password)

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-786

kernel messages kill scologin                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-169

snmp dumps core if > 25 trap destinations                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-717

need a less than 1k SCO ANSI TermCap                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-804

Line 39 of /etc/termcap file is missing a comment character (#).
be marked as a comment:  "Attributes below scoansi= nbase + base
+ vattr..." and so on.                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-885

inetd refuses to run daemons as users with starred passwords    
mmdf and nouser.  Connecting to port configured with a daemon   
to be run as one of these users gives immediately closed conn., 
and inetd logs error in syslog (see attachment).  This prevents 
e.g. talk, finger, and mmdf's smtpd from functioning.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-901

Line drawing chars in this font do not join together            
missing pixel between char cells.                               
hops has updated font pending change approval                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-894

tic on terminfo.src generates errors about dup entries          
this entry dupped (last entry)                                  
 hops has fixed src pending change approval                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-922

cc -O[23] .. -Kno-Frame fails to make runnable bzip2-1.0        
step.                                                           
make CC=/bin/cc CFLAGS="-O3 -Khost -Kinline -Kpentium -Kno_frame
Bug fixed in UW[27] late 98. same fixes applied to optim/loop.c 
corrects                                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-824

Mouse does not repond properly or intuitively                   
Toshiba keyboards, the mouse movement the is inferior to 505    
and double clicks do not work unless done _very_ slowly.        
Unsatisfactory from usability perspective.                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-960

Laptop kerenel install not default to safe/easy case            
obscure error message and failure when start loading RAM disk   
shld modify so CDROM notebook image sets this automatically     
dosm/usr/src/softMgmt/isl/n-flops/newdef                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-954

would like option to prevent syslogd listening to network       
prevent it listening to network (like its counterpart in Linux  
and FreeBSD), as otherwise it is possible for malicious users   
to fill up root filesystem with false messages.                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-998

ndc daemon(on console upon boot)tries to exe. 2x and dies.      
ndc daemon tried to execute twice by output message.  Message   
stated "ndc already running." Reproduced on two seperate machine
s. Jeffcr witnessed output.  After boot, ndc is not running.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-919

more dumps core if you toggle the scrollbar on or off           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-565

Desktop Icon/Tool to mount CDROM (on /mnt)                      

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-1688

dlvr_audit always sends to message queue even if no auditd      
daemon is running before sending the audit record on the        
message queue specified in audit_dmninfo - normally it silently 
fails, but if the message queue id happens to be used by        
another program, anything could happen...                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-246-63

PPro erratum #66 could be a problem for OSR5                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-624

Typing link  at Boot: gives error Invalid linker fd(60)  
and hit ENTER, type in driver name, comes back with:            
FD: unexpected count 2, expecting 1024... Header read error: -1,
Invalid linker fd(60).  This same procedure works fine when     
booting from CD.  Works fine on 5.0.5.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-187

dumpsave/ldsysdump isn't copying the dump off of swap correctly.
Please see full report in included text file.                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-246-88

Cannot get a dumpfile written on panic w/4GB RAM                

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-264

vi(C) coredump in global substitute command -- malloc corrupted 
vi binary.  To duplicate: vi /etc/termcap /usr/lib/terminfo/term
info.src /etc/termcap /usr/lib/terminfo.src; for each file, do  
":g/ansi/s//snazzy/g", then "n!".  vi dumps core on substitution
in the fourth file.  (Try more files if 4 files doesn't do it). 

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-527

eeE, Intel - Intel Pro100B does not restart after pulling cable 
Lost.  When you plug it back in, Link is not restored.          
You must reboot the system to restore link integrity. Not       
a good solution.  OSR 5.0.5 and eeE 1.4.1 off of BBS site.      
Both fail. (also nd restart net0 does no restore link).         

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2814

System panics with "PANIC: phystokv - page not mapped"          
time of the panic.                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-534

eeE, Intel, Driver goes belly up if watchdog timer called.      
Code c->c_flags = DF_OK; was changed to c->c_flags |= DF_OK;    
This does not clear the DF_INIT flag.  If this flag is not clear
ed, the watchdog timer will reset the board every               
.5 seconds indefinately - the board is 100% broken now!         

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-510

eeE, Intel - eeE driver printcfg during boot reports too much IO
even though it really only uses 32bytes.  Also, the manual      
for eeE also says only 32 bytes. Caused confusion with a user   
due to possible overlap of I/O space with another device. Turns 
out to be a goose chase because eeE only uses 32 bytes.Pls fix. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-173

NFS Server hangs/fails with files >16MB <1K with PRO/100B driver
Try to copy large files from that server with any OS client     
The server will hang.  Also, intermittently, small files will   
appear to successfully be copied, but the local file will be 0K 
Client side OK.  Attached uuencoded driver fixes it (from HP)   

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-176

System panics during network load after 19hrs of ftp'ing files  
at Compaq. Bob is working it as part of some other escalations  
(erg710760). This bugreport is being filed to close the loop    

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1353

NIC not automatically recognized                                
option in /opt/K/SCO/eeE/5.0.4d/ID/eeE/AOF/eeE and the card is  
not seen by netconfig.  We need to add this variety of the      
PRO/100B to the supported cards.  It works OK when the card is  
defined for netconfig.  The problem is only recognition.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-482

Pathname in dparam man page says "nkdev" instead of "mkdev".    
/usr/lib/nkdev/perms/DKINIT and should be changed to            
/usr/lib/mkdev/perms/DKINIT                                     
(the 'n' changed to an 'm'.)                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-478

Fatal error choosing "Customize" in "Setting up hard disks"(ISL)
w/100Gig logical drive.  Chose "Customize" for disk options.    
Continued to next screen & got fatal error. Error messaged      
attached in file.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-474

Message displayed to user: exit value of 1 & no bad block       
displaying vendor information on the RAID controller and line   
saying "no bad blocks found".                                   

     ----------------------------------------------------------------------

Bug-ID:     DAV-2-16

Divvy suggests illegal ending value for last division in table  
suggests an ending value for the division that overlaps the     
recover division.  This results in an annoying error message    
from divvy.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-936

the attempt to configure non-zero controllers for ad160 dies    
will cause the link kit to break. root cause is a 5char field   
def in the idscsi portion of the idbuild routine.               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-976

Failed messages are bounced to root instead of the return addr  
accepted & spooled, it is bounced to supportaddr (usually root) 
instead of being sent back to the return address (sender).  This
is completely inappropriate; messages should always be sent back
to the return address.                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-861

Cannot successfully configure second SCSII hardisk during ISL.  
for Unix" for 2nd disk configuration.  When system comes up get 
error message "Cannot stat: /dev/a" & Cannont mount /a filesyste
m.  Both device nodes for the first & second hard disk point to 
the same place.                                                 

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-87

mktime(S) normalization of Julian dates is broken               
all months are 31 days long, while another part knows this is   
incorrect.  Bob is trying to use mktime() to manipulate Julian  
dates.  The man page has an example which is fundamentally the  
same as what he's trying to do.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-80

idmkenv makes, but hides, a backup of /etc/inittab              
it hides it down in the SSO where the panic'd sysadmin will     
never find it.  Change the mv command to:                       
mv $CLIENT_ROOT/etc/inittab $ROOT/etc/inittab- 2>/dev/null      
thus putting it in plain view.                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9801

scosh email y2k problem                                         
"-9" for a message with a year of 101 (2001)                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9802

date field is not right justified in scomail summary window     
scomail was removed per Auriga.  However, when the day of the   
month is between 1 and 9, the date does not fill the allowed    
space and hence does not line up.                               

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2831

locales broken when 505a supplement installed                   
to danish_denmark.8859 for example, and the date etc are still  
output in UK format. Also missing files in /usr/lib/lang/*.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1385

504->505 IPU always results in Verify errors in FASTTRACK files 
incorrect modes.  The IPU to 505 does not correct this.  May    
also be a problem with 505 FRESH install.  Automatically        
correcting these discrepancies may result in a 100% clean verify
report after ISL of 505.  Please investigate.                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-115

Need to provide support for the Euro curreny                    
ratified the character sets to be used                          
This will affect filesystems, X as well as text screens.        
Keyboard mappings. etc....etc...                                
Need to identify limitations with for instance Wyse 60's        

     ----------------------------------------------------------------------

Bug-ID:     LTD-210-474

mscreen on ptty - vi displays extra char if cursor keys used    
load 'vi' and enter insert mode. Use cursor keys to navigate    
then press ESC to exit insert mode. A spuriuos character appears
at the current cursor position (eg. 'B' if last cursor key used 
was 'cursor-down'). Not a problem when using a wy60.            

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-10001

I cannot upgrade to 5.0.6 from 5.0.5                            
to 5.0.6!                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9976

ifor_pmd fails to start in 5.0.6 BL1                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-190

5.0.6BL1 grep(C) can't read from pipes                          
does not work on pipes (and probably not on some other things   
either).  Simple `echo foo | grep foo` fails, never matches     
anything.                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-3

5.0.4 to 5.0.6 IPU fails during kernel relink                   
/dev/udp is not present in the device file that kslgen creates, 
and this causes problems when processing the nodes file.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-922

Customer manages UUCP network over 1000 sites,uustat has 1000lim
uucp itself works only because he doesn't try to send files to  
all 1000 sites at once, but uustat is limited (hard coded) to   
1000 sites in it's UUSTAT_TBL see source & UUSTAT_TBL limited   
/net/godsco/r/v/os-325/usr/src/cmd.os/lib/libuucp/parms.h       

     ----------------------------------------------------------------------

Bug-ID:     SCO-246-29

Optimizer causes a segmentation violation                       
Contact leff (x7618) for details.                               

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-25

`scosh calendar` UK holidays file in bad format                 
"Bad holiday format".  This accesses the file /usr/lib/scosh/uk/
calholidays, which I guess must be corrupt.  Running `scosh     
calendar` with no args accesses /usr/lib/scosh/us/calholidays   
and does not complain.                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-139

Prompted for a mount point for /dev/swap                        
fdisk/divvy install. It also requests mount points for          
/dev/recover and /dev/scratch.                                  
Reported by Rebeccah and Tom Parsons(tom@tegan.com)             

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-188

mkhosts does not always link all hostnames into /usr/hosts      
can get confused.  fix is to replace the line:                  
 *) HOST=`/bin/grep $i /etc/hosts | /usr/bin/awk '{ print $2 }'`
with:                                                           
 *) HOST=`/bin/grep "^$i[  ]" /etc/hosts | (and so on)          

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1377

Syntax error in /usr/lib/lang.src/col.8859.src                  
This should read PRIM: 0x01 - 0x1f 0x7f - 0x9f                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1235

Interactive fdisk/divvy: get MOUNT: mount failed/bad address    
for Unix, remove and recreate partition.  Then get error        
MOUNT: possibly damaged file system, mount failed               
MOUNT: Bad address                                              
but installation goes on without further error                  

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-29

num & caps lock affect mouse buttons & cursor keys              
either num-lock or caps-lock are set. The cursor keys suffer    
from the same problem. They should have the same mapping        
irrespective of num- or caps- lock.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9798

dates only 15 bits wide                                         
any duration based license will expire in 2001.  This fix adds  
2 more bits to the date which means it will now expire 2038     

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1426

/etc/ifor_pmd dumps core if date on server goes beyond 2015     
past 2015. This problem is a companion to SCO-236-772 which was 
addressed in OSS601a. This problem however, was omitted from    
OSS601a because the solution required a kernel relink. It should
be part of a OSS496 possibly?                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-156

Kernel issues too many messages on CD-ROM open failure          
stifling kernel messages when Merge is accessing the CD-ROM.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-218

Kernel doesnt license TCP/IP for boot floppy                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-373

sys/vid.h changes break merge - other apps too?                 
which breaks backwards compatibility in a bad way. Need to      
re-order the structure members to preserve backwards            
compatibility                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9840

scoterm doesnot support hpa and vpa sequences UW ansi desc uses 
for csr positioning. Scoterm does not suport these so curses    
programs on UW accessed via scoterm display as broken           
These sequences need adding to scoterm esc seq state machine    
(perhaps as part of console driver unif)  wuz SCO-59-8989       

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-219

Because login forks, exit status not available in utmp.         
the exit status & signal of a login session into e_termination, 
e_exit fields of utmp record.  Because these are laundered by an
intermediary login(M) process, this information is lost.  Fix by
login not forking, or by capturing & forwarding wait() status.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-324

Need to make beta product have expiring license                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-434

scoterm died when a few hundred characters were pasted into it. 
to exit.  Same result if the same buffer contents were pasted   
into vi running in scoterm.  FYI ~350 characters were used to   
cause the failure.  Not sure what the threshold for failure was 
but it seemed not much <~350.  Fails using mouse or Edit-->Paste

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2819

System administrator should be notified of user license breach  
license, user no. 6 tries to login) we allow them to log in but 
issue a warning to their login screen.  The system administrator
is not notified of this breach - an email or warning to a log   
file would allow him to see that more licenses are needed.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-479

Erratic behavior w/ Free OSR5 licensed system.                  
Case: log into X.  Telnet into system.  User gets warning "User 
login limit exceeded" aft. password prompt, second telnet no    
warning is issued, third telnet system freezes up system after  
passwd prompt & system reboots after any key is hit on keyboard.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-505

Enterpise Panics without user limit notice when exceeding users 
the system panics without a user limit notice.This also happens 
with user bumps. Panic message is License data corruption-invali
increment                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-437

After installing 10 user license uname -X reports 2 user lic.   
license installed.                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-143

Need CDROM that does not lock door, and suppresses printfs.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-325

Need to remove beta eval license from PRD files                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-425

scoterm killed when click on "Reset (full)" option of File menu.
selected the scoterm process is immediately killed.  This has   
happened on FR and DE systems running kid=2000-02-02/BL4.1.     
English BL4.1 not tested.  Sample core file from German system  
is attached.                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-496

scosh shell cannot be executed from a window on the desktop     
diplayed on the foreground, does it display correctly.          
Root can execute scosh, however when cursor is moved, the       
menu/words get shifted, distorting the window. When scosh is    
ran in the background different behaviours are seen. See file...

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-586

Display of spurious over-bars or under-bars when typing commands
when typing commands on one system.  Sometimes see over-bars on 
another system.  Not reproducible at will.  Used default Scoterm
TERM=scoansi with vesa.svga.vbe.1024x768-8 in both cases.       
Use  to refresh display and bars vanish.                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-682

Underscores/underlines mysteriously appear in SCOterm window(vi)
A refresh will clean them up. However, entering failsafe mode   
from SCOlogin (f1 button) and vi a file, underscores & underline
appears consistantly upon right cursor moves.  Cannot refresh.  
Makes text files hard to read.  (systems: aride & bilbo1)       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-743

/etc/tcp not setting default route                              
and not start routed if a default route was set there.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-254

SCODB isn't available via keyboard early in boot process        
be read in.  I'm requesting that scodb uses the serial tty      
selection until the keyboard map is read in.                    

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1466

unable to remap shifted extended delete key                     
data file don't work for scancodes greater than 129. I tried    
remapping scancode 85 in the attached at.iso.ukd and it worked  
as expected. On remapping 131 none of the shifted combinations  
work.                                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-561

mapping for input key on keyboard is incorrect.                 
located on the same keypad.  However these keys give output with
the following key symbols: < > |                                
The key: < > | does not have any mapping what so ever.          
Also: the ` ' keys have"one key push" delay. also w/504 upgrade 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-588

Core dump when executing Terminal Manager                       
scoadmin terminal or through the scoadmin->system->terminal mngr
Error displayed on window:                                      
/var/opt/K/SCO/Unix/5.0.6Eb/sa/SCOadmin.ts/System/term.obj/activ
te.scoadmin: 756 Memory fault - core dump                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-599

Install screen colors are inconsistant once install finished.   
text.  Install ends with black background, blue border, and     
white text.  Machine: tasmania.pdev.sco.com; AMD K6/450mhz      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-671

configuration windows fail to materialize                       
Desktop Appearance & Behavior windows.  It is not possible to   
use these graphical config tools.  There are probably others.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-648

"Preferences Editor" under "Options" menu on desktop is broken. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-847

Keyboard interrupts stop working; can't get past isl.pause stop.
Boot: prompt to start installation.  Next input required after  
isl.pause executes but no response to  at that point. Two
different keyboards gave same result.  Cannot reproduce with BL5
or BL6.  (Also occurs when booting BL8.0 netisl kernel or CD.)  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-280

adding default route at install causes routed not to run        
does not run routed.  this makes the success or failure of      
routed dependent on something quite counter-intuitive.  we      
should have some other way to tell the system to turn routed on 
or off, such as ROUTER_DAEMON= in the /etc/default/tcp file     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-841

A message "Initial System Load (ISL) activated." is shown       
not found in previous BL, is shown on the top of the screen     
of system load.                                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-759

Unregistered licenses fail to give WARNING message upon login...
a WARNING message stating the system should be registered with  
SCO.  5.0.6 case: No WARNING or any other message is given to   
the user identifying that the system is unregistered.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-924

Incomplete kernel identification stamp in pre-BL8.1 distribution
comment for the kernel reads "rel=mode=ISL  kid=3.2v5.0.6".     
Post-install the kernel stamp changes to "rel=  kid=3.2v5.0.6". 
Stamp format has been "rel=3.2v5.0.6  kid=2000-99-99/BL9.9".    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-514

closing client and logging back in under different user caused  
Closed one client and tried to log back in with a different user
that already had a session open).                               
System panic-ed, no register dump, message on the screen was:   
PANIC: License data corruption - invalid increment              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-946

506, get ifor_pmd restarted while running ANT network test suite
I get the ifor_pmd restarted message while running the IPX      
test suite.  This didn't happen in earlier builds (BL7).        
Appears to be reproducable.  Also, these are fresh installs     
of BL8 with just the ANT test suite installed.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-974

Strange character below reg software msg on every network login 
software message is a single strange character that's really    
annoying                                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-975

Screen clears important info upon 1st login limit exceeded      
software message shows at the top of the screen but all the     
other data (such as login exceeded warning) scrolls off the     
screen so you can't read it.                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-997

Free license allowing > 2 users to log in.                      
correctly.                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-982

brand -u fails to count desktop login                           
logged in.                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-980

506 BL8.1, scoterm arrow keys (not keypad) fail in scoterm.     
to move around in custom (CHARM) mode.  In BL8.1, scoterm       
doesn't pay attention to arrow keys except those on the keypad  
to move around.  This is really bad and will generate lots of   
calls.  Must fix.  xterm doesn't have this problem in BL8.1.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-953

Some dead keys on US English AT keyboard:  cursor, page, insert 
in IQM.  Uses /usr/lib/keyboard/ps.ibm.usa for keys file.  The  
separate 4-key cursor keypad is dead.  Also the separate 6-key  
cursor keypad has five dead keys: Insert, PageUp/Down, Home, End
All these cursor keys are functional on the numeric keypad.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1030

ScoTerm Arrow Keys don't work                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1031

Running /usr/bin/X11resize on the console bitches               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1039

Update Kernel ID to no longer include BL number for final.      
the BL number.                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1004

Default route is lost when tcp/ip is config'd post install.     
e, some x, is written during IQM when tcp/ip is configured since
gateway spec. is specified.  If system is up, netconfig has no  
entry for gateway, thus value for GATEWAY is null. "routed isnt 
running. Result: no routes defined unless "tcp" file is tweeked.

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1589

telnet from HPUX11 (64 bit os) to any OSR 5.0.x fails to connect
HPUX11 to HPUX10 behaves fine                                   
HPUX10 to OSR 5.0x behaves fine                                 
HPUX 11 to OSR50x never get login; but netstat -a reveals the   
connection as established.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-222

/etc/initscript: /etc/p6update: not found                       

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1469

mmdf buffer overflow                                            

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1468

lpsched eats up memory if lpstat is run and jobs are queued     
makes lpsched grow by one page (4k).                            

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1391

Mail messages are lost on transmission failure                  
mail messages are not being re-queued on a failed transmission  
usually with large mail messages (1MB - attachments).  This     
seems to be more apparent on a slow and/or error prone network. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-757

talkd does not log source host name                             
with impunity because talkd doesn't log the remote host name/ip 
addr, and the hostname printed on the user's screen is passed as
part of the talk protocol rather than being looked up via PTR   
record, and so can be trivially faked.  Will check in fix.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-820

cannot configure incoming SMTP mail for MMDF                    
send outgoing mail, but can't get incoming mail from remote     
host via SMTP.  Tried doing a telnet port 25 to the host        
but the connection closes.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-142

bootos does not recognize 0xb and 0xc partition IDs (FAT 32)    
valid windows partition types.                                  
Simple corrections to boot/h/dio.h and boot/bootos.c            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-144

Installs hangs without wd.noscan bootstring on some systems     
the OSR5.05 install will hang on the second access of the CD ROM
unless the bootstring wd.noscan is used.  propose to set this   
by default so installs just work.                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-145

mkdev fd fails during creation of root floppy, too little inodes
aprox 1280 to allow more users to create a succesful boot root  
floppy set.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-146

Mcart util prints the value 100 and 101 for the year 2000 and > 

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-147

mkrom.c treats 2 digits year incorrectly                        
burning into a ROM. The value passed in is the number of years  
since 1900.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-139

BTLD installs fail due to memory fragmentation                  
newer Compaq Systems. The bootinfo structure needs to be        
increased.                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1507

floppy driver returns errno 5 for all IO errors.                
and it's bad or the floppy is not there at all.  The driver does
not distinguish between the two.                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1211

request for support of 7 platter changer                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1454

Generic boot/root set causes Panic after insertion of root disk.
generic root floppy with the following;                         
"Panic: exit: cannot exec /etc/init (PID1) status 0x00000200"   
The only I/O devices built into the kernel are a SCSI QIC and a 
SCSI cdrom.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1512

make default NBUF larger and decrease default PLOWBUFS smaller  
on larger systems.  Need to figure out reasonable defaults that 
scale with mem size.  Johng has a good idea of what the defaults
should be in order to optimize buffer cache size, and maintain  
enough DMA-able RAM for legacy NICs,etc. See related 236-1056   

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1530

Stp driver returns enxio insted of eio for bad media on read    

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-126

PLOWBUFS granularity is too crude                               
cache (mostly for floppy).  PLOWBUFS tunable is too crude: with 
e.g. 300MB buffer cache, each percentage point equals 3MB!  I   
suggest allowing PLOWBUFS >100 to mean an exact number, rather  
than a percentage, of DMAable buffers to allocate.              

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1514

legal banner says 1998, should be 1999                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-163

_IKNERNEL mis spelled  should be _INKERNEL                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-164

need to update Adaptec Alad driver with new handoff             

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2801

hpnp does not use hp jetdirect ports properly                   
first. however a workaround is to use the old hpnp from efs122. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-8985

stune semaphore parm changes rtrns err when relinking kernel--  
kernel with new semaphore values in stune ie: SEMMNI 300        
Kernel rebuild fails. Workaround: leave all semaphore values    
out of stune (others ie: SHMMAX are OK to change) instead make  
changes in mtune--bump up def. value to match max. value--relink

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9980

mkdev scripts don't explicitly specify shell to run under       
failures or weird operation under bash (or ksh presumably)      
 all should have invocation line changed to be                  
#!/bin/sh or (better) #!/sbin/sh explicitly invoking correct sh 
 from the current : (old style indicating not csh)              

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2750

fdisk de-activates the active UNIX partition for no reason      
a partition number. choose q to quit.  choose q to quit again so
you get back to the shell. fdisk will say that there is no v    
active UNIX partition. running fdisk again confirms this. this  
is a big usability and support problem in my opinion.           

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-856

"ps -p num" will always return 0 to the shell                   
return a value of 1 to the shell if the process does not exist, 
and a value 0 if it does. Openserver ALWAYS returns 0. To       
reproduce, issue the command "ps -p num" for a process that does
not exist and then "echo $?". (Same problem on 3.2v4)           

     ----------------------------------------------------------------------

Bug-ID:     SCO-777-596

Digi would like PCI support in our serial driver                
be a matter of using some of the PCI APIs to determine the      
addresses of the card, and then using them instead of the       
addresses in sio_sup_brds[]                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-308

Install hangs at SCSI disk configuration message.               

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1632

scoadmin serial needs updating for PCI serial support           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-322

Error message "cannot bind to processor" after SMP is added.    
gives an ERROR message on boot.  The message displays after the 
Control-D/single user section of the boot.  The message reads,  
UX: ERROR: Cannot bind to processor X                           
where "X" is cpu number.  This does not occur in OSR 5.0.5.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-246-27

using non-english (LANG=...), mkdev hd (fdisk phase) fails      
this is broken (failed comparison of Active vs Activ vs Actif,  
english, german, and french respectively)                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1635

OSR5 installs but locks on first reboot attempt.                
ROM table which currently isn't preserved with dparam.          
BIOS freezes on reboot of system.                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-368

HP Vectra install fails due to lack of cd-drive recognition     

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-202

ungetty is needed if use selects the getty -f option.           
allow the above to function and in fact causes the uucp system  
to fail with all commands, uucp, uuto, cu etc.  In addition 3rd 
party programs also fail.  Please see attached file requesting  
permissions be changed to 4111 on ungetty with owner root.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1636

Multiple devices for same device ID                             
to prevent possible lockups with mismatched Disk and mother     
boad combinations.                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1639

Update for Compaq IDA needed.                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1640

Update for Compaq CHA needed.                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-351

The installation hangs                                          
a 3.5" floppy, an LS-120, a atapi CD-ROM and an IDE hard drive  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1644

Arad driver is missing from boot floppy, required on BTLD       
reasons but was never added to the BTLD floppy we ship.  The    
arad driver needs to be added to the BTLD.                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-449

Cannot install on a system that has two ide hard drives.        
master, primary slave. CD-ROM: secondary master. LS120: second  
slave.                                                          
After selecting the CD-ROM, it reads files from it, then the    
message:" warning: wd0: timeout on fixed disk dev 1/64" appears.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-450

Cannot configure a second IDE hd on system                      
desktop. Right after it prompts to enter 'q' to enter the       
/etc/dkinit utility.  Here a window appears with the hardware   
info, and soon thereafter, the message "WARNING: wd0: Timeout on
fixed disk dev 1/64". System needs to be turned off and the hd..

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-457

"init 1" command fails to enter Single User Mode.               
its entering single user mode (Xdesktop killed), but is         
unsuccessful returning control back to the user.  A blinking    
underscore in the upper left corner of a blank screen is the    
final result from the "init 1" command.                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-274

No root disk controller is found during install.                
you boot off the cdrom the dac controller appears to be there.  
But a WARNING: hd: no root disk controller was found is also    
present, and you can't install.  The mdac driver is not present 
in the btld.img file on the CD.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-201

OSR5.0.6 bl3 will not install, spontaneous reboots during instal
when using the CD only), the system spontaneously reboots       
instead of continuing in the ISL.  Subsequest to this, OSR5.0.5 
FCS was successfully installed and stress tested.  This is      
disturbing.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-294

Install to IBM Netfinity 5500 with ipsraid BTLD fails.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-468

Initial boot fails after install to HP Vectra XM Series 4 5/133.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-536

Dell Dimension 586/75 PCI - IDE HD won't boot after fresh instal
were generated during install.  I've attached a detailed report,
including hardware info, software history, IQM selections, and  
the exact errors generated during boot.                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-197

Installation hung during SCSI hardware configuration.           
and ips drivers, but the install hung at "F mdacinit".  There's 
no Mylex hardware in the machine.  I had to go back and restart 
the install, using "disable=mdac" to get past this point in     
the installation.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1224

WD driver does not support Ultra DMA 33                         
reworked for this support to be added.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-634

Can not detect IDE host adaptor during system load              
for the IDE devices, such as CDROM. It causes there is no       
IDE CDROM to select in media selection screen. However, Johng   
has a workaround with a BTLD disk                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-637

PANIC: exit - cannot exec /etc/init (PID 1) on 1st reboot (IDE) 
first reboot get "PANIC: exit - cannot exec /etc/init (PID 1),  
status 0x00000200, trying to dump 16287 pages to dumpdev        
hd (1/41)..."                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-558

The WD Caviar  hard drive is not recognized during installation 
during installation.  This prevents the system from being       
installed. This is the error message I receive with Badtracking 
on or off. Fatel error in disk info.c line3525 Function DIAjust 
division cannot adjust divisions to fit on the usable space.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-519

ARCserve install can cause emergency boot disk creation to fail.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-626

System freezes when any changes are made to the port            
select the port that a device is attached to, in this case ter- 
minal. Change speed to 19200, line-mode 'n', login-answer 'on'. 
Click 'OK', system is frozen now.  For more details see         
attachement.                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-338

Installing using lighweight character mode fails on ThinkPad.   
and Bad Tracking = OFF; Lightweight character mode = Yes        
Making F.S. & Part. reaches 100% and outputs following message: 
Reading from Install Source: 10KB/ramFS/extractProd/extractAll  
terminated by signal 8                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-198

Error during the btld extraction even though seems to succeed.  
ServeRaid HBA driver (ips) off of the btld diskette, I got the  
following error: "btld error - Extracting BTLD distribution     
/etc/uadmin getdev b ips: no such device, Error 19".  The       
installation still seems to have succeeded, and reboots okay.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-673

chg default permissions on installtion of the tape backup device
backup devices from 666 to 660.  This is a security issue as any
user can read any file on the tape including those which don't  
have read permission.                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-160

tune GPGSLO GPGSHI and NSTRPAGES for users based on RAM         
SCO systems "out of the box" run faster and require less tuning 
by end users.  Support gets hit with calls consistenly and they 
get bounced to esc.                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-676

Install does not recognize the CD-ROM, hangs after a few tries  

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-260

Mtune defaults generte error messages following SCO TA          
SCO recomended starting points  listed in TA104410 cause warning
messages to be displayed during kernel relink.  Mtune needs to  
be updated  NAIOPROC NAIOREQ NAIOBUF NAIOHBUF NAIOREQPP NAIOLOCK
TML                                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-243

Support required for new density codes for new SLR tape drives  
codes. Request support for the new codes in 5.0.6 and also      
provide updated support for 5.0.5.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-244

Support required for new density codes for new SLR tape drives  
codes. Request support for the new codes in 5.0.6 and also      
provide updated support for 5.0.5.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1561

integrate new blad driver handoff from Adatpec                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1646

slave only devices not recognized by wd driver                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9755

Console driver is causing a hang when used w/new graphics card  
init routine.  The machine is locked up and will not enter      
scodb                                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-699

Kernel relink fails when adding SMP by "custom"                 
. However, instead, the BL5.0 SMP package can be used.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-702

During installation, at system load, root disk can not be found.
WARNING:wd0:Error on fixed disk dev 53/0, block=0,cmd=0x000000C8
        status=0x00005184, LBA sector=0                         
WARNING:hd: no root disk controller was found.                  
for workaround, at boot prompt type "defbootstr wd.udma=33"     

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1687

vi -L gives the wrong output when invoked                       
On 07:17:03 at 07:17:03 saved 2 lines of file "/tmp/test.out"   
When it should read:                                            
On [date] at 07:17:03 saved 2 lines of file "/tmp/test.out"     
to reproduce, send vi the -TERM sig to crash while editing      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1695

add force flag to usage message                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-723

Add Wallgreens changes to enable Write Cache on SCSI drives     
enable write Cache function on disk drive if available.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-727

network enable boot root floppy set                             
enabled floppy set                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-742

typing bootos partition_nu at the Boot: doesn't boot the        
Pressing  boots the active partition.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1690

Add updated Compaq IDA driver to 5.06.  refresh source.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1691

Add updated Compaq Cha driver to 5.06.  refresh source.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1692

Add new Compaq clad driver to 5.06.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-726

Update Parallel driver with bi-direction mods handoff from CS   
Consulting services                                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-815

Wd driver needs updating to honor BIOS settings                 
present which can cause problems if the user has set the devices
to use PIO only.  wd driver should honor BIOS settings and overr
ide only if bootstring has been used.                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1704

-m flag doesnt function as documented, halts install with prompt
before changing a value.  Use of the -m flag during link kit    
configuration of a database install will halt the progrees of   
the installation waiting for a prompt from the user.            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-843

Fresh install pauses to confirm change to value of NSTREAM.     
aio plus all IQM Optional software; BL8.0 add suds & aio with   
default IQM software.  Auto-detect AMD PCnet-PCI II NIC and conf
TCP/IP.  Install pause asks to change NSTREAM from 256 to 4352. 
lk_config.sh turning on dnlc/aio/suds. Post-install NSTREAM=7552

     ----------------------------------------------------------------------

Bug-ID:     SCO-29-2868

scoadmin or Filesystem Manager: Add Mount Configuration failed  
for a filesystem (on a second SCSI disk), which I had           
created using divvy. This failed - error file is attached.      
I was, however, able to mount and use the filesystem as if      
nothing had gone wrong.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-872

Cannot mount a xenix filesystem through filesystem manager      
filesystem manager to add mount config.  The script doesn't fail
until I click OK to create mount. Results in "...Couldn't create
fsMount instance for /xenix_fs." I am able to use `mkdev fs` to 
create mount config, I'm able to mount/unmount thru scoadmin.   

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1417

Filesystem Manager unable to mount > 9 local filesystems        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-814

BTLD images missing Ad160 and clad drivers                      
drivers and older drivers need to be removed.                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-874

AMD K5 system  has a boot failure error after installation      
reboot and receive the following error: Stage 1 Boot failure:   
error loading hd (40) /boot.  The installation completed. I had 
Bad track on and use whole disk for Unix.  This system does     
install 505.                                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-884

Interactive fdisk/divvy install hangs invoking dkinit utility.  
dkinit of Interactive fdisk/divvy path. Repeating "WARNING: wd0:
Timeout on fixed disk dev 1/0".  IDE Primary Master UDMA 2 disk 
had DOS primary (active but no OS) & 1 extended partitions; gone
when reboot.  Not reproducible in BL5.0.  Other BLs not tested. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-910

Real addresses used in sample DNS files                         
need to use non-routable addressses.                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-929

net-enabled emergency floppy gives error when you use `ps'.     
Defaults database could not be allocated due to: cannot be read"
ps output is normal other than that.  This doesn't happen with  
the non-net-enabed set because the default root floppy doesn't  
even have `ps' on it.                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-987

second set of device nodes allow root disk corruption.          
allows the creation of a second set of device major/minor number
pairs that allow disk corruption.  for example 1,0 = 53,0       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1666

UDMA non-functional in SMP env                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-996

Install on IDE / PCI motherboard fails with PANICS              
when it attempts to start writing to the hd with FS error       
messages.  I've seen two different panics which I have recorded 
and attached to this bug report.  The report includes both      
software panic messages and hardware configuration.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-969

install fail when select all software & non/destructive on 2 IDE
the system fails to install. I have reproduced this several time
each time it fails differently at different points of install   
I have seen this error twice: /ramFs/configdisk/configdisk      
terminated by signal B.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1078

wd.debug bootstring causes panic at "F wdinit" on some machines.
BL10 sum: 49778 SID: 94  7/28/00                                
Machines: macaroni, triton                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-290

Remove alternate setting for hash buffer alocation if SMp       
systems.                                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-46

talkd gets wrong entry from utmp, hangs                         
otherwise it can run into dead entries and hang attempting to   
open a port which is not openable (e.g. currently-closed pty).  
See attachment for an example of how to demonstrate this.       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1427

brand -g[-a] coredumps if /usr/lib/netls/conf/nodelock is empty 
# >nodelock                                                     
# brand -g 2FH021400 scdkskdv                                   
Memory fault - core dumped                                      
Same symptom with brand -g -a "LicenseData" LicenseNumber Code  

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1421

brand -L core dumps if /usr/lib/netls/conf/nodelock is empty    
# >nodelock                                                     
# brand -L                                                      
{                                                               
Memory fault - core dumped (duplicated on 505,504 and 502)      

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1342

Cron scheduling is not consistent when submitting jobs via scrip

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-117

lpd does not properly move requests to local print server queue 
not all moved into the local queue. The current printing job    
must finish before the next job is moved from /usr/spool/lpd to 
/usr/spool/lp/temp. This causes delays in printing as well as   
erroneous print status from lpstat on the print server.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1302

PPP fails with /usr/lib/ppp/PPP_ADDR: Connection refused        
outgoing calls via pppattach.  Unlike the earlier E127446       
SCO-236-478 bug, pppd does not die.  Even with maxwait on pppd  
set to 132, this happens occasionally.  See attachment for      
further details                                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1434

Setup 5.0.5 as NIS Slave server nis logins don't work           
nis user, but can't login as nis user.  Can't ypxfr passwd.nam  
or yppush from Master, both fail with error "Can't lock passwd  
map.                                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9858

clock locking violation in nuct driver causes backwards time    
lock_clock.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9869

Need the "kamal clock" for multi processing box                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9876

sys/itimer.h yields spurious "warning: dubious tag declaration" 
appear for any INKERNEL code that includes just sys/time.h.     
Other header files protect themselves against this sort of thing
and sys/itimer.h should too, by declaring "struct proc;" for    
itself.                                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1487

rtc and system clock out of synch + and - frequently            
different by a large amount of time, and several times the      
system clock was 5 or more mins ahead of the rtc                
see escalation for complete details                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9844

select() always sleeps for 10ms-20ms longer than requested.     
timeout of the requested struct timeval interval.  It always    
sets the timeout for one more tick than necessary, so:          
   select(1us)     --> 20000us delay                            
   select(10001us) --> 30000us delay                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9862

RTC randomly falls into an unrecoverable state.                 
will drop into a state where it yields garbage values, and can  
not be reset via setclk.  Only reboot cures the problem, at     
which point, the RTC shows a correct time again.  Neither 505A  
nor OSS496a cure the problem.  track_rtc=0 does cure it though! 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9768

adjtime() silently rounds off adjustments < 10ms.               
rounded to the resolution of the system clock." (which is 10ms).
This causes all sorts of grief for programs like ntpd, which    
expect greater resolution from adjtime().  Adjtime() should     
accumulate changes < 10ms instead of just dropping them.        

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1425

automount daemon leaks memory                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9879

IP driver needs hooks for IPFilter package.                     
hooks for it need to be applied to the IP driver.               

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-10002

Non-root users can disable CPUs, and lock any process to a CPU. 
allowing any user to disable/enable CPUs, and to lock/unlock any
process to a particular CPU (even processes not owned by that   
user!) -- most simply by using a copy of 'cpuonoff' or 'lockpid'
both of which are normally exec bin:bin only.  Kamalm has fix.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-196

man command exit with error message: man: cannot local /usr/loca
   man: cannot locate /usr/local/man                            
appears at end of whatever man page is displayed.               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-341

NE2000 driver (named "nat") conflicts with IPFilter ("ipl")     
implemented fix.  TLS709 (the IPFilter TLS) also needs to be    
updated.                                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-319

Upgrade fails with Error: kernel link failed.                   
"cat: cannot open /var/opt/K/SCO/link/1.1.1Eb/etc/conf/         
sdevice.d/pit: No such file or directory (error 2)... Error:    
kernel link failed."                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9434

IPU 5.0.4->5.0.5; unable to login to Inet Mgr as "admin"        
5.0.5 BL6.5 the Inet Mgr appears to have upgraded correctly but 
user "admin" is unable to authenticate with root password.      
Bug replicated numerous times.                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-489

ip/icmp driver still uses deprecated variable one_sec.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1060

initscr() or endwin() calls are leaving files open              
can be run on 3.2v4.2 with no problem. Problem also reproduced  
in support using customer program. See attached file for copy.  
If customer increases NOFILES then problem still occurs on the  
(NOFILES - 4)'th iteration of program.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-970

atof() fails badly for some values                              
(not an over/underflow condition).  Can be demoed by code that  
uses atof()/scanf("%f") or system utility that does same; e.g.: 
awk 'BEGIN {print 11.000000000000000001;}'  This problem exists 
in both elf and static coff libraries.  Does not exist in 3.2v4.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-439

atof returns incorrect results with OpenServer native C compiler
you occasionally get wildly incorrect results.  The attached C  
program returns 8.000977 when it should return 11.775000.  We   
suspect that the cause is probably with the compiler and not the
atof function itself.  (See attached file for more information.)

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-405

strtod() gives the wrong result for long strings                
then strtod() will return the wrong value. This problem has been
reported by Sybase Technical Support and is very similiar to    
bug SCO-236-970 where Informix reported problems with atof()    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-354

The kernel ID is not correct                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-583

WARNING: clock_mark: clock not yet active! -- Message duringboot
WARNING: clock_mark: clock not yet active!                      
On my iSO Link, AMD K6 2/400 machine (totally).                 
The system appears to function properly though.                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-252

WARNING: clock_mark: clock not yet active!                      
is displayed during boot process                                
Dell P5/75 in System test lab                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-636

A clock warning is shown after the system load has done         
is shown after the system load has done when rebooting the      
machine. The message also captures in /var/adm/messages         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-668

Machine gets flood of "BACKWARDS clock motion" and "missed ticks
machine should have a TSC-capable CPU, but the clock driver     
apparently fails to detect a TSC.  Furthermore, the PIT-based   
driver shouldn't get so many missed ticks or any BACKWARDS      
motion.                                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-669

Installation plagued by clock debug messages (e.g. "BACKWARDS") 
kernel(s).                                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9899

RTC driver occasionally yields a completely random value.       
problem.  Occasionally, the RTC driver produces a single whacky 
result, then goes back to being correct.  Reproduced on 5.0.5A  
and 5.0.4 with and without OSS496A.  Example frequency:  15     
bogus reads in 24 hours under the tight loop.                   

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-119

ipf driver doesn't work if STRMAXBLK == 4096                    
This structure has size (24 + 8 * BPF_MAXINSNS).  BPF_MAXINSNS  
is either 500 (which would be OK), or 512, depending on value of
macro QNPAGES.  QNPAGES is true in the build, therefore the     
structure is > 4096 bytes, and cannot be allocated with allocb. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-838

ipf driver (used by pppfilter) panics on large filter program.  
512, but the ipf driver panics on anything more than 128 insns. 
Actually, the safe maxiumum is about 500 instructions (see also 
BEL-27-119), but this limit prevented the 500 v.s. 512 issue    
from ever actually manifesting.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-856

Security weakness in IPFilter.                                  
A weakness exists in the IPFilter firewalling package in        
all versions up to and including 3.3.15 and 3.4.3 that allows an
attacker to penetrate the firewall when a common, yet admittedly
flawed, configuration is used.                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-827

The IPFilter/NAT package is missing the 'mkfilters' perl script.
needs to get installed.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-231-505

SMC Driver Panic with low streams                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-832

Ping should behave much more intelligently w.r.t DNS problems.  
actually get logged as such, and don't look like a network      
problem between the pinging machine and the pinged machine.     
Also added a handful of useful command line options, making ping
generally more useful.                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-915

sar shows cron using far too much cpu time                      
high visability                                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-97

Cannot admin fasttrack in fr or de.                             
password, but was denied access to admin.                       
Roch had to physically remove the admin passwod get us in.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-557

Slip driver is not being added.                                 
continue, SCO TCP/IP, SCO TCP/IP, incoming link, and continue   
on with the prompts,after picking a password, the cursor turns  
into an hour glass, and it just sits there without finishg, re- 
linking nor anything. See attach file for further details...    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-313

lmail uses /tmp to deliver large mail message to.               
on a separate filesystem.  The fix is to have lmail             
always use the destination filesystem for it's tmp files.       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-289

address book mostly non-functional                              
address book.  A workaround exist, however, this must be applied
after software is installed which is not acceptable.  Kurt will 
fix in source and create a new build.                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-286

LDAP queries fail with error code 0x57                          
results in failure with 0x57 error code                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-287

release notes are for prior version of communicator             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-423

if HOME=/, then root can't use email.                           
to be applied in this new version 4.7                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-445

Communicator run as root cannot access Tarantella Express.      
and a dialog box instructs the user to restart the browser.     
When next accessing TE, the browser repeats this process,       
instead of correctly realizing that the archive is already      
downloaded.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-481

"Get Msg" button doesn't retrieve mail                          
open the mail reader window.  When the window is closed, a small
window appears, I think it is the retrieve window that appears  
when the "Get Msg" button is clicked.                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-571

Wheel mouse is not responsive in scrolling through web pages    
and down on a web page and I saw the web page went up for 3     
3 seconds before it went down.  Stop scrolling the wheel mouse  
mouse will not stop the web page immediately as well.           
* New bug for BL4.2 and this bug also not in OSR505. *          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-417

ShortCuts conflicts: SCO Panner & Netscape Communicator         
Conflicting key combination: Alt + left/right arror key         
SCO Panner overrides Communicator's shortcut to move forward or 
backward through cache'd webpages.  ShortCut combo is given in  
Communicators toolbar but does not function accordingly.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-483

POP is simply not working.                                      
Doesn't retrieve nor sends mail.  I just can't put it any       
simpler.                                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-538

NetHelp documentation text's font size are too small            
NetHelp.  The font size of those pages are too small for human  
to read, even I display it in a 17" monitor. I was unable to    
change Nethelp document's font size using communicator          
preferences menu.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-595

Tool tip is turned on and each icon(gif) displays tcl code      
Each icon on this page: web, mail, ftp, net.... displays a pop  
help window with tcl code when the cursor is on the gif.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-766

NS Comm 4.7: Address Book does not assign a recipient to a mesg 
The Communicator release is actually 4.7.                       
I'm aware that this is not completely supported, but I was      
advised to bug report for the customer anyway.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1022

Communicator can't fire off from french/german system           
in Xwindow or input from the command line. If inputting         
"netscape" from the command line, it returns an error message:  
(in German version) /usr/bin/X11/netscape[100]:                 
unbeschrankt:Syntaxfehler                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9680

e3H driver uses too much DMAable RAM                            
insisting on its buffers coming from DMAable RAM.  This         
contributes to severe performance problems on systems on which  
there is already great demand on this low RAM.  e3H should not  
need low RAM.                                                   

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1320

erratic performance of 3com 3c905 card running at 100Mb/s       
the first time and subsequently only about 1 second. Wait 15    
minutes and try again and it takes >20 seconds again. This happe
ns with e3H driver from 5.0.4, 504c and May 98 version from pub/
drivers. llistat -l shows large "No STREAMS Buffers" values     

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1358

e3G driver in OpenServer 5.0.5 is faulty                        
and networking does not function (also 504C,  see TA 105872)    
WARNING: e3G : cannot install intr vecno=65535                  
Bad interrupt vector 65535                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-152

Onboard 3c905b chipset not recognize when trying to add NIC     
OSR504 on the OSR505 system. The subsystem and subvendorID is   
required in the AOF file in order to auto detect this card on   
configuration. ALso, this driver failed to install on OSR504 w/ 
rs504c. So, can't test it.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9412

 Networking Fails when both CPUs configured                     
is configured, networking works, when duo CPU's configured,     
networking fails. (Get errors such as host down). Packets not   
going out. Changing the network card to different slot per      
Don's instruction helped. Reconfigured and relinked kernel.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-292

RAID5(w/o hot spare) vdisks cannot be rebuilt.                  
Place data on the array. Remove one disk, destroy data, replace 
When system goes multi-user, vdisk restore is scheduled. As soon
as the restore (fast or slow) starts, the system panics.        
Virtual disk cannot be rebuilt.                                 

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1432

panic in usock streams routines                                 
associated escalation for further details.                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-254

Used custom system verify (thorough) and found discrepancies    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-414

The cpu id code fails to recognize the AMD K7 on the %cpu line  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-663

machine shutdown when using interactive fdik/divvy              
two additioanl filesystems, I was asked for their mount points. 
A message flashed by: /usr/lib/mkdev/hd : cannot find /bin/grep 
and machine shut down immediately.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-865

Discrepancies found running software->verify->software          
install, those are all been fixed, however 2 from fasttrack were
introduced.  I've attached the report with the discrepancies.   
The fix discrepancies option does take care of the wrong uid's. 
I ran software verify right after the installation.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-937

relocatable SSO discussion talks about "DOS OS" in a /u fs      
about data in the fs such as user accounts and a "DOS Operating 
system".  Change "DOS operating system" to "DOS files installed 
by SCO Merge" to be more correct and realistic.  This warning   
tells users that any such data is blown away by the IPU         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1444

Index page numbers are incorrect in OpenServer Handbook         
the postscript corrected index file on aphrodite/pub/OpenServer/
Release5.0.5/z.index.ps, per naomib.  Bugreported just in case, 
and to provide bugsco ID for TA on this subject.                

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9758

List of files to back up for IPU is badly in error.  Breaks syml
for an IPU, you don't actually get the files you need, and you  
screw up your existing symlinks.  (Many files listed are symlink
s.)  Robert Laughlin from spawar.navy.mil sent this complaint to
usability & techpubs aliases.  Rewrite this section with JBean? 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9901

doc on asktime must accommodate ability to enter century digits 
Handbook discusses using asktime(ADM), it doesn't mention thee  
new ability to enter century digits into the date, which came   
with RS505A or OSS600A.  See SCO-236-1571 for bug against asktim
man page.                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9418

About this book section doesn't mention Features & Limitations  
e section called "About this book" (aboutbook.s) lists all the  
books in the doc set, but leaves out Features & Limitations.    
FEATS is full of important information available nowhere else;  
it should be listed here.                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9884

Need to verify all URLs and link sequences given for sco website
URLs and link sequences may be wrong too.  Check all URLs in all
books.  Personally verify the information.  Refer to RNotes for 
latest URL info?  (If we do this, it's a new function for the   
RNotes.)                                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-244-25

remap_driver_cpu(K) - user_value param description is incorrect 
they are actually in /usr/lib/uucp/default/                     

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1454

RAM limit described as 512MB, should be 4GB (see Release Notes) 

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1460

man mibcomp.sh - no such command, its /usr/bin/mibcomp          
its not, its just mibcomp. Check the mosy and post_mosy         
man pages as well, they have the incorrect references as well   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9070

screenshot broken in German online Handbook                     
'Testen der Modemverbindung' broken                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-247

-s option uses tenths of seconds; man page says seconds         
"getty listens for detect_time seconds after establishing a     
data connection".  this value is actually tenths of seconds.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-395

Description not match syntax                                    
Syntax example references libtermcap                            
Also need description of effect when used with                  
libtermcap/libtermlib                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-501

init 1 can run from other tty other than the console            
from the console. However, I can execute 'init 1' from other tty
(including the gui desktop).  I also can execute 'init 1' from a
telnet session(login as root) as well.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9931

scanf(S) pg should mention %p conversion referred to in printf(S
conversion of the scanf(S) function". But the scanf(S) page     
doesn't mention %p.                                             

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2433

The window label "Langage" should be "Langue" in French         
title "paramtres" should be "parametres", the 'e' doesn't appear
because it is a special character (grave e).                    

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1393

Example TCP,e entry in /usr/lib/uucp/Devices is incorrect       
(TCP TCP,e ...). See also bugid LTD-200-2 which describes same  
bug in 3.2v4.                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-371

-D option is specified under limitations (-D doesn't exist)     
Only root may use the -a, -d, and -D options.                   
Line should read:                                               
Only root may use the -a and -d options.                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-400

man bootpd(ADMN) lists incorrect bootpd debugging dump file.    
"/usr/tmp/bootpd.dump - debugging dump file created by bootpd". 
But there was no such file created for the command syntax       
/etc/bootpd -D 3 -c /tftpboot                                   
Debug information was instead written to /usr/adm/syslog file.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-460

bcheckrc man page has an error at line 7.                       
5.0.4, 5.0.5, and 5.0.6, line 7 reads "initialization root and  
boot filesystems at system initialization"-->"  Somebody just   
needs to delete the text after the first word on that line.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-8368

need details about available training for users & admins        
education, off the Support home page.  For comet, we just added 
printed information about the URL to the end of Chap 1 of the   
Handbook, under "Accessing SCO services information online".    

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9902

new capability on file cmd                                      
dump additional info if invoked on corefile or ELF files        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-336

missing info in defopen, defread api - defctl                   
req DC_GETFLAGS (0), or DC_SETFLAGS (1). flag value returned    
arg DC_CASE (01) - respect case, otherwise bit 1 off ignore case

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-427

rcmd(SLIB) missing doc same as hosts.equiv                      
readable access is denied. rcmd(SLIB) description for ruserok   
should be updated (last para before Notes:) to say              
"anyone other than the owner, or if the file is root owned and  
user or group readable, then the check automatically fails"     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-475

smpw driver does not auto-detect 100Mbit-only segments.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9759

Online drand48(S) page leaves out all the eqn gifs.  If-else st 
hardcopy man pages, and another format for online pages.  But   
the online pages are showing nothing at all where the eqns shoul
d be.  Twenty equations are missing.                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1624

man mkdev doesn't doc mkdev fs, etc.                            
15 items not doc'd (see attached output)                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1670

"()" subheading is misleading: ksh has no bare "()" globbing    
characters such as "@", and cannot stand by themselves: see how 
same aspect of ksh is doc'd in book authored by David Korn,     
e.g., ISBN 0-13-182700-6. Note: pbj:800 shows literal "&lowast" 
in this section on my Communicator 4.7, rather than "*".        

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-251

New script(TC) -S flag uses STREAMS pseudo-tty.                 
on a BSD pseudo-tty (/dev/ttyp%d); with -S, on a STREAMS pseudo-
tty (/dev/pts%03d).  See also ptmx(M), grantpt(S), unlockpt(S), 
ptsname(S).  [unfortunately, no "see also", no docs at all for  
BSD ptys, even though we use them heavily]                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-60

Video Adpater - update Vesa driver note to include VBE 3.0 supt 
is supported by the VESA driver is 1.2 and 2.0.  SCO Engineering
looked into support for 3.0 and we are automtically supported.  
Please update documentation to indclude 3.0 as an extension     
revision that is also supported.  No software change was necess.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-510

command line alternatives to invoke modem manager: mkdev modem  
"mkdev modem", this entry should also be included in the man    
page for "mkdev".                                               
It can also be invoked through the scoadmin hardware/kernel     
manager, Modem Manager.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-255

getty(M) -s flag is actually in 1/10 second units.              
for detect_time seconds ...".  "-s" actually specifies tenths of
seconds, should say "getty listens for detect_time tenths of    
seconds".                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-738

http://localhost:457/dochome.html "SCO OpenServer ™ "...  
™ Documentation Library".  I guess ™ is some        
formatting tag that got left in by accident.  This existed      
in 5.0.5 as well.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9886

new stty and termios capability needs doc                       
New flags in termio.h, new flags to stty util                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9854

need man pages for menu and pfmt                                
for these utils - copy across UW7 ones will be fine             

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1489

SCOHelp "For more about DHCP" refers to non-existeng man pages  
Protocol (DHCP) Server => For More about DHCP. This page refers 
to man pages on aasd, aasd.conf, dhcpd, and dhcpd.conf.  These  
man pages are not available.                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1510

remove the statement "modify these parameters manually"         
5.0.5 Release notes, p. 55, should be changed slightly since    
NSOCKET and NUSOCOTS cannot be modified with ./configure. The   
/etc/tunek utility auto tunes all of the kernel parameters      
mentioned. Please see attached file for recommend changes:      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1613

error values in man page are not complete                       
could get this since the man page only lists 4 valid errors,    
none of which was what he received.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-735

give impression /etc/default/issue only read if no /etc/issue   
exists - if it does bot are displayed                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-764

Missing a newline in the "Syntax" section of passwd(C) man page.
[ -r retries ] [ name ] passwd -s [ -a ] [ name ]" syntax       
description should display "passwd -s [ -a ] [ name ]" portion  
on a line by itself.  Just a text display/formatting error.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9904

Should specify limitations of type of files work on             
or at least mention that it expects to work on text files       
- not binary ones                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-656

syslogd(ADM) contains an obvious omission [search for `local0'] 
From the syslogd(ADM) man page:                                 
  local0 -- local7                                              
          Messages reserved for local use through               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-659

mention of root password required during install, deferred is an
is required during installation, when in fact "deferred"        
is still an option.                                             
REPORTED BY OUTSIDE BETA USER BOB BAILIN, SEE LIZ FOR DETAILS   

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1524

new version of hd(C) has -D flag option which is not documented 
this is not properly documented in the online help or man page. 

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1427

The tape command amount argument displays a max value of 4GB    
display up to 4 GB and then reset. Checked source and sure enoug
h, comment by jamesh says max it will handle is 4Gb. Can we make
this clear in the man page. See SR362264 for more details       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-830

The hyperlink doesn't display the manual page for malloc(S)     
Graphical Environment, 1st paragraph. The word malloc(S) is     
hyperlinked, to the man malloc(S).  However, clicking onthe word
results in Malloc: No match. The Doc Title: menu bar displays   
Manual Page Request.                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-866

New Features doc says IPUs are from 5.0.0-5.0.4, not 5.0.5.     
"In-place upgrades", it says that IPUs are available from       
release 5.0, 5.0.2, or 5.0.4.  Fails to mention 5.0.5.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-175

gettydefs(F) doesn't document optional 6th parameter            
[ # login_program ]".  "login_program   Optional: the name of an
executable binary to be invoked as the login program.           
login_program is executed in place of login(M)."                

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-268

df(C) usage, options wrong; add -Q flag.                        
[ filesystem ... ]".  1st 5 groups are exclusive of each other; 
last 4 are valid modifiers of any of the others.  (Before 5.0.6,
-BIP needlessly rejected -fl).  New(5.0.6) -Q "quick" suppresses
sync(), giving faster but potentially less accurate results.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-591

Doc refers to version 8.8.8 of sendmail, should read 8.9.3      
version of sendmail(ADMN) is version 8.8.8,....." should read   
8.9.3 which is the current version in this release.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-695

New CANCEL_MAIL=NO feature needs to be documented               
version of cancel                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-806

New Features doc lists old Merge releases and Windows 95 support
Chapter 1, New Features, Windows and DOS section, does not      
promote Merge 5.0.0a or Windows 98 support or other good stuff. 
Merge 3.2.2t and 4.0.1 information needs to be removed and/or   
updated to reflect Merge 5.0.0a.                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-807

New Features docs incorrect "Additional products and components"
Chap 1, New Features, Additional products & components section, 
lists the layered products available from the OSR CD, and the   
Optional Services products.  Both lists need to be edited to    
reflect current products and/or versions avaiable on CDs.       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-808

New Features doc lists PostScript books for deleted products.   
Chap 1, New Features, Accessing PostScript documentation files  
section, says Netscape Servers (LiveWire, Mail, etc.) and       
related documentation books available on Optional Services CD.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-829

The IPFilter/NAT man pages refer to 'ipftest', not provided.    
IPFilter/NAT suite (see SCO-559-828).  Man pages probably       
should not refer to it.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1538

-wordwrap optin not working when using charm server             
-wordwrap option should cause the text to wrap at the widgets   
right margin.  This works correctly with the motif server, but  
it doesn't for the charm server.                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-870

There is no complete description to set up a NetISL server/clien
NetISL server or client.  Just brief mention.  I have created a 
test case with more detailed info on how to configure NetISL    
this is located at http://midgard.pdev.sco.com/Projects/osr506/ 
osr506-installTestplan.html Install 58.1                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-831

There isn't a /info/opnesrvr/fixlist in the SCO CD-ROM          
Software, last paragraph under Numeours bug fixes. It says that 
to view the list of bug fixes to see /info/opensrvr/fixlist. The
SCO base CD doesn't have the /info/opensrvr subdirectory. I don'
know if this isn't yet available FYI.                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1653

Should include NetISL doc in OpenServer Handbook                
the Handbook and call us about why it's not doc'd;  we point    
them to the Networking Guide.  It *would* be more natural as an 
extension of the chapters on installation/ISL --OR-- put a clear
reference in the "Installing or Upgrading" chptr to Netwking Gde

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-927

sysadmsh install directions in scohelp are obsolete             
installing sysadmsh for some old software manager. (Menus are   
different, etc.)  In the included txt I've included the basic   
steps I used to install sysadmsh in 5.0.6. Although sysadmsh    
isn't supported, some programs that depend on it are.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-938

Cannot push NIS maps to slave server. Must reinitialize slave.  
to slave server.  Hangs after it tries to push the new map to   
slave.  Tried rebooting slave & master servers, didnt work.     
Next reinitialized slave server.  Ran ypmake again. New map was 
pushed to slave and no hang evident.                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-287

userls(ADM), groupls(ADM) claim programs in /usr/bin, not /etc  
command binaries are in /usr/bin.  They are actually /etc/userls
and /etc/groupls.                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-970

say "group ID of the process is set to the effective group ..." 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-706

Sustained visionfs load retards net speed to client time-out.   
to another host results in delays up to a minute.  A reboot     
mends the issue.  This is being reported against the OS instead 
of VisionFS because davidd is experiencing similar issues w/o   
VisionFS. See attach. for more detail and `ndstat -l' output.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-896

Cannot distribute users home directories (NIS) using GUI        
Acknowledge by clicking on OK.  An error message appears that   
displays that the user's password cannot be found in /etc/passwd
The user's account can be distributed by using the command line.

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9932

pg 239 advises adding a trailing ".", but pg 231 sample has none
named.rev has no trailing "."                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-345

Ambigous and incorrect information on anon uid for NFS exports  
exports (setting anonymous access permissons), it indicates that
if request comes from an unknown user, the UID used will be     
the effective UID of anon=UID.  This is false. anon=UID only    
affects the mapping of root's UID. UW7 docs explain this clearer

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-560

All of the documentation refers to MS version 2.1.3             
This should be changed to the newer version 2.1.4a.             
This should also reflect support in the System Requirements     
section for 5.0.6.                                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-900

dual scsi disk install breaks if first disk is fdisk/divvy'd    
being installed.                                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-942

need to doc bug ID SCO-559-939.  It's a limitation/known problem

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-8680

the year for the "Date:" field is incorrect after Dec. 31st,1999
is incorrect.                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-748

usermod -l removes user from all groups                         
removes oldname from all groups, but does not add newname to    
them.                                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-785

Locked Accounts will not be displayed with passwd -s            
becomes locked in scoadmin.                                     
Use the passwd -s command to show locked accounts and it will be
displayed as PS.  Locked accounts will only show with passwd -s 
if you change it manually in scoadmin.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-728

Update group picture for Freedom                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-206

Intel has released a new OpenServer 5 eeE driver, needs packagin
Source and pkg can be found at                                  
ftp://hal.sco.com/pub/intel/eeE/mdi/sco5eeE1410tree.tar         

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1405

On board NIC not recognised at install time                     
This device is not in the ~eeE/AOF file so is not recognised    
at install time.  You can add it manually later but this is     
inconvenient.                                                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-146

Device # pull down list [0-15] but card was at 19.              
auto-detect as auto detect wasn't seeing the card.  It presented
PCI BUS#, Device #, Function #   menu choices.  When I got to   
Device I was unable to enter a number >15.  I derived the number
from using this card with the "hw" command returned the Device. 

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1324

Get compare-errors during ftp load-tests using eeE 1.3.5        
When they do rcp, ftp, nfs tests between a client and it, they  
see compare-errors in ftp-tests after some hours. I saw this    
with a 350MHz m/c. They dont see it with eeE 1.1.3 under 5.0.4  
using oss469b. I used the oss469b tcp driver.                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-691

506/bl6 Configure PCI netcard not enough PCI bus values         
values in AOF files.                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9933

savage, SCO, hangs when running X11perf on Savage 3 and 4 cards.
HDK 7.1 versions of X11perf, the Xserver hangs on the savage 3  
(Hercules Terminator Beast adapter).  The Xserver dumps core    
on the S3 Savage 4 prototype adapter.  Sent email to brianr.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-782

SCO, shrk, Matrox Shark 4-port - can only use 1st, 2nd ports.   
but ports 3 and 4 don't configure properly (and disable ports   
1 and 2 also).                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9791

Check that all books use www.sco.com/chwp instead of longer URL 
it's just www.sco.com/chwp.  Check all OSR5 books & update.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9184

Screen dump for Int'l Settings Mgr not updated since 5.0.2      
gs Mgr has not been updated since 5.0.2, but the GUI has changed
slightly.  Is this worth a new screen dump in the Handbook?  A  
mention in the Features and Limitations?                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9439

NOTE refers to old default netmask setting, outdated for davenpo
ISL.  Should be updated to reflect current behavior.            

     ----------------------------------------------------------------------

Bug-ID:     JPN-1-40

Miss Print                                                      
Becouse printer name is "tpubs_lw2", these must be use under    
bar.                                                            
"tpubs_lw2-8157" and "tpubs_lw2-8158" are right.                

     ----------------------------------------------------------------------

Bug-ID:     JPN-1-41

Miss Print                                                      
is a mistake.                                                   
alias cd 'chdir !* || doprompt'                                 
is right.                                                       

     ----------------------------------------------------------------------

Bug-ID:     LTD-209-3053

wrong port number used                                          
(the command line) is port number 7000 used.                    

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-795

Claims support for 16 multiscreens. This is incorrect           
16 screens, but 12 is the default". I believe that this is wrong
NSCRN has a max value of 12 as has the MAXSCRN value used in the
console driver.                                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-12

SCO IP addresses in doc causes network configuration problems   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-281

Not enough information is present for setting up /etc/ftpusers  
anonymous ftp.  The last paragraph needs to indicate what the   
permissions should be, who the owner should be, and the group   
it should belong to.                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9272

popper man pg says /usr/etc/popper, which should be /etc/popper 
/etc/popper.  However, the man page says it's in /usr/etc/popper

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9310

No man page exists for ftpusers                                 
UW7 as an FYI and point of reference. The man page on ftpd      
does make reference to this file as an important data file      
for ftpd. It should be documented.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1509

source for lpadmin has no support for a -R option               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-347

Mnt -t outdescription incorrect in docs on mounting NFS         
filesystems, it says that from output of mnt -t output, if      
the vaue of Can user mount = No," however, this does not        
 appear in output. The relevant line is "mount if requested"    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-432

OSR506 - Flat Panel Digital Monitors work with certain cards.   
XPERT XL adapter without problems.  Also, the Matrox mtx driver 
supporting G400 Flat Panel adapter should also work with this   
digital monitor (once i get the code checked in).  This is      
new and should be doc'd.  Good for sales people at shows!       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-442

A command line option to invoke PnP manager: scoadmin pnp       
the ISA PnP Config Manager.  The correct command is "scoadmin   
isa"                                                            
book: SCO OpenServer Handbook, Ch 17,                           
section: The ISA PnP Configuration Manager interface.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-443

There is no entry information for "isapnp" in the mkdev man page
ISA Plug and Play configuration                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-433

Wrong path shown for the localised FR & DE "more.help" files.   
/usr/lib/nls/support/Unix/fr_FR.ISO8859-1/Unix/more.help        
and /usr/lib/nls/support/Unix/de_DE.ISO8859-1/Unix/more.help.   
Actual paths:  /usr/lib/nls/misc/fr_FR.ISO8859-1/Unix/more.help 
and /usr/lib/nls/misc/de_DE.ISO8859-1/Unix/more.help.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-654

Add "rexecd -r" option                                          
There is some other minor cleanup from code examination.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-256

Misspelling, "ispnp" instead of "isapnp"                        
"isapnp" the first time it appears, then has it as "ispnp".''   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-619

/info/readme.* on CD has broken link to 'Creating Boot Floppy'  
for "Creating Installation Boot Floppy Disks" but do not        
contain any info on this procedure in the file.  Possibly a     
broken link to another document.                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-488

Link from Reference Documentation Set to apparently old man page
item in Reference Pages list is (NSCOMM) - Netscape Communicator
commands.  But that link is to a man page dated 2 December 1998.
Apparently not the same source found with "man -k communicator" 
which returns:  communicator (XC) - start Netscape Communicator.

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-177

Missing files /info/readme.htm and /info/readme.txt             
and /info/readme.htm.  Unisys would like the READ ME FIRST      
corrected or the files to be made available so they know what   
they are missing out on.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-266

tcp_q0limit and tcp_qlimit_scale inconfig parameters need docced

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1655

States the when a Desktop client is run $Lang is also set       
Intersettings Manager is needed in order to get the $LANG       
to run                                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-86

scsi(HW) "proposed SCSI-2 standard"                             
scsi(HW), as SCSI-2 is now a well-established standard and the  
draft proposal for SCSI-3 is close to ready.  The entire man    
page could stand to be reconsidered in light of current SCSI    
standards and the state of our drivers.                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-237-319

psGUI(CHARM): Attributes dialog won't on screen.                
Notice the dialog box extends past the end of the screen to the 
right in CHARM mode?                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-240-21

ScoAdmin tool for editing snmpd.peers file insists on password  
file will not permit a null password entry. This is a problem   
if a SMUX peer has not been coded to provide a password to the  
SNMP agent, as may be the case if the SMUX peer has been ported 
from another platform which does not recognise a password.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9280

PPP Manager: Unable to add endpoints - dynanmic incoming request
incoming requests , I get the error: "Unable to add /modify     
incoming endpoint, unable to get list of users, no method for   
object {} was found in class database, object name violates the 
naming rules. (Doesn't occur on all machines/is resolution impt?

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-158

Add /usr/local/man to /etc/default/man MANPATH variable         
Add commented pager line for /usr/bin/more                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-159

Add /usr/local/bin to PATH variable                             

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2511

short help not localised                                        
german_germany.8859, ppp manager                                
Options -> Defaults: short help for menu items is still in      
English, not in German (same for French)                        

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2835

Put system name in title bar of scoadmin window                 
same display, this will allow user to determine which window    
will administer which system.                                   
Customer feature request via WWW bugreport.                     

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-1

scoadmin modem manager cannot access non-SCO serial ports       
"Modem port" field pulldown menu won't allow typing a port name.
Menu is constructed from known-present SCO sio driver port names
only.  Thus cannot autodetect modem type even if it's supported;
can't find correct dialer file for modem, though we provide one.

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1563

named displays sccs info which includes actual machine name.    
SCO.  The machine name displayed is arnold.pdev.sco.com, which  
is a build machine.  Displaying the name might tempt hackers to 
try to attack the machine.                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-210

do not configure PPP endpoints in netconfig, call PPP mgr instea

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-216

netconfig fails to launch the PPP manager                       
should call via scoadmin instead of directly                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-220

/etc/motd still says copyright 1998                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-168

mv(C) French/German message catalogues "STILL_ENGLISH".         
four "STILL_ENGLISH" messages that should be removed or properly
translated.                                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-264

scoadmin PPP does not do anything, it just exits                

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-209

need to update the copyrights to 2000                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-318

Need to add support for newer modems                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-213

ODSSI cannot remove a book when it has a / in the ID            
invalid where the book ID ($0) contains a '/'.  I'd suggest     
'$0=""' as a cleaner, clearer, and all-round better version.    
This fault means that remove_book.sh cannot remove a majority   
of books.                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-195

scoadmin ppp - confusing customers - must run netconfig also.   
l and then cancel out and rerun scoadmin ppp to confiugre endpts
.  doc is all messed up.  Updated PPP warning message to better 
explain how to run netconfig - see SCO-245-183.  This is a desig
n issue that needs further development.                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-320

Adding a user with account manager makes /etc/passwd 600 perm.  
has 664 permissions.  Right afterwards, it has 600 permissions. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-217

scomail chops off the last 2 digits of the date                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1568

Reports Manager does not give last digit in 2000 year           
manager for a report with year 2000 dates on the system (as if  
the system date was past Dec 31st 1999) the last digit gets     
truncated so that instead of 2000 or 2001 it reads 200.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-214

add entry to mailcap file to launch netscape for HTML files     
null 2>/dev/null                                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-312

/usr/adm/install.log is World writable                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-344

SCOADM File MGR doesn't let parallel dirs to be NFS exported    
can export parallel directories in a fileystem. However, File   
system MGR will not let me do this. It gives error "You cannot  
export /home/nfstest3 which is a subdirectory of /home/nfstest" 
This is errorenous since these are parallel directories.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-369

Text "Open Desktop" appears during unusual IQM pop-up           

     ----------------------------------------------------------------------

Bug-ID:     BEL-27-8

PPP manager destroys phone numbers in Systems file              
Systems entries.  PPP Manager "Manual Dialup Configuration" or  
"Edit Login Script" seems to have copied the phone number from  
the first entry into the 4th entry.  See attached Systems file  
excerpts.                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-404

Configuration of second nic using netcfg breaks networking      
second nic permanently and erroneously modifies system          
network information such as node and host name. This causes     
portmapper to fail, Internet ADMIN server to fail. Second       
nic configured with its own unique hostname, IP, and domainname 

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1034

Does not allow modems on non-sio board to be configured.        
the manual configuration screen so that modems on 3rd party     
boards can be configured.  Maybe also cull tty list from from   
files in conf/init.d/ to be added to pick list.                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-509

modem port gets changed when using the modem manager            
This behaviour happens whether the port is set to either tty1A  
or tty2A.  After closing the serial manager window, the modem   
port is automatically set to tty1A if it was set to tty2A and   
tty2A if it was tty1Ai, this doesn't happend when on CHARM.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-556

Error: can't read "site ": no such variable.                    
incoming (remote access) enpoing through the ppp manager.  The  
error appears as soon as all the data is entered and selects OK 
to close the window.  The whole ppp manager window dissapears,  
and the erorr message is displayed.                             

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-456

"License additional users" is not greyed out on desktop system. 
manager but is denied thereafter.  Free OSR5 license greys out  
any license features that are unavailable to the system and     
does not allow the user to input license information.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-627

the logchecker cron job should be changed to a different time   
The cron job is configured by default to run logchecker @ 2am,  
on Sun & Th. This time causes the system to send mail to root   
on a consistent basis, starting from thursday. Portion of email:
"..cannot be executed at the specified time due to a time change

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-688

serialOsa should not ignore ports that it cannot get a fifo for 
ignores any ports that do not return a value from siofifo       
Since no 3rd-party driver will respond to siofifo, this stops   
all 3rd-party devices from being known by the modem manager.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-689

serialGUI hard-coded to use 14 as a fifo value                  
there is no value, dis-allow changing the fifo in the GUI.      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-698

Cannot configure address pools for PPP, PPP manager dies.       
choose "Yes" for PPP address pool. Next choose "Configure Pools"
. SCO PPP Manager exits abnomally with an error dialog box.     
ERROR while executing:  'PPP Manager', (exit code: 255)         
PPP pools cannot be configured.                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-241

Incorrect title in French International Settings Manager        
title; should be "Gestionnaire de configuration internationale" 
to match Launcher.  Observed in 504 -- may not have been fixed. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-251

bootpd remote vulnerability                                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-754

need to strip leading zeros from IP addresses                   
end range                                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-396

scomail saved attachment dates are 1yy when they should be 20yy 
Messages->View History... and you will see that the saved date  
has a year of 1yy instead of 20yy. You can also see this in the 
History: Attachment line in the users mailbox                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-693

IP address/range is cut off when viewing with Address Allow. Man
Select a range of addresses that will be assigned. Exit AAM.    
Run AAM. Click->View->Address Allocation. Next click on the     
address pool(name).  Status is shown for the IP addresses.      
The host identification(ip number) is cut off, cant be seen.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-914

Cannot 'unretire user' "error occured no update to /etc/shadow" 
shadow updates /etc/shadows account w/ RETIRED. However when I  
'unretire user' the following error occurrs: "/tcb/lib/auth_scri
pts/chtype: test is not retired. /tcb/lib/auth_scripts/chpasswd:
/etc/shadow-t not created" See file for more details & steps... 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-947

Configure an address pool using AAM GUI,Root window spews errors
window where scoadmin was fired up in spews a errors.  Looks    
very ugly.  See attached file.                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-948

Configure PPP using PPP GUI,Root window spews errors            
PPP driver is not linked into the Kernel.  And asked if they    
would like to have it linked in now.  Choose Yes.  Get error    
dialog box (error 255) Error while executing PPP Manager.       
Root window is filled with error messages.  See attached.       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1698

useradd breaks the /etc/passwd and /etc/group symbolic links    
the sybolic links from /etc/passwd to                           
/var/opt/K/SCO/Unix/5.0.5Eb/etc/passwd and from /etc/group to   
/var/opt/K/SCO/Unix/5.0.5Eb/etc/group.  This was previously     
reported in 1995 as LTD-209-2937 for OpenServer 5.0.0.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1010

Improved security:  resolv.conf perms 640. users can't use it   
Is this on purpose?  It's a drag for users.  nslookup reverts   
to using localhost as the name server.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1019

SNMP Agent Manager doesn't work in 5.0.6.  Worked in 5.0.5.     
-> Networks folder, your machine remains silent as a moonlit    
night in Death Valley.  (No client appears).  Client appears    
fine on 5.0.5.                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-945

Cannot add a subnet entry for DHCP server through SCOadmin GUI. 
In subnet field add a valid subnet (i.e. 132.147.169.0) GUI     
complains this is invalid.  When a REAL invalid subnet is enter 
ed (i.e. 132.147.169.3) a message displays that the host portion
must have a ".0".                                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-300

mdevice(M) doesn't document "B" characteristic                  
present in a generic boot kernel".  It determines which drivers 
will be linked into a "generic" kernel built by `mdkev fd`.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9417

Title of "Release Notes" is translated, but the RN are no longer
man, but the Release Notes themselves are no longer translated. 
Only translated books should have their titles translated in    
cross-references.  This occurs throughout Hbook, possibly other 
books.  Probably same problem w/title of Features & Limitations.

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9400

French Hbook bleed tab for Appx is English "Ref Data".          

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1221

ramfs does not support a seek beyond an empty fragment          
fragment in a block, the subsequent write either fails EFAULT   
of causes a PANIC. This is caused by the procedure              
ramdata_getDataPtr returning a negative length which is used by 
the copyin in ramdata_writeData. See fix in attached file       

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1647

netconfig/selected to add a WAN and then cancelled, then hung   
choose what link type, choose cancel, this causes netconfig to  
hang.  If you kill the /opt/K/SCO/lli/5.0.5a/ncfg/bin/pop -X -T 
pid, a tclerror log is created in /tmp. Removing vtcl component 
from oss600a does not fix issue like it did for 5.0.4.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-539

neo, PrecisionInsight,NM2160 - mouse draws wrong periodically.  
Watch mouse closely when desktop comes up.The hour glass gets   
messed up breifly when the 'Loading ...' of the desktop screen  
comes up.  Also, the hour glass top portion is often flipped    
over (kindof) when you initially type startx in root weave bkgrd

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-540

neo, PrecisionInsight,NM2160 - switching between CRT/LCD no wrk.
at all.  If you try to run an LCD and then try to run a CRT     
screen, the CRT screen is badly colored.  If however, you first 
switch to CRT via Fn F8, then run startx, CRT at some mode is   
okay.                                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-541

neo, PrecisionInsight,NM2093 - some pixels drawn wrong on scrn. 
Test Suite results however, it is apparent on the screen also.  
Basically you see pixels show up when fonts are drawn that look 
like periods. Don't using nm2160 or vesa.  Run scoadmin video   
and you see 'Current Video.Adapter.Configuration.' .'s are wrong

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-542

neo, PrecisionInsight,NM2160 - 62 FAILs on Dell Latitude CP     

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-543

neo, PrecisionInsight,NM2093 - Driver runs at 62K xbench        
chipsets like NM2200 and NM2160 run at 220K or 180K (on faster  
machines though).  I'd expect NM2093 to run a bit faster        
then on 62K.  Is all optimizations there?                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-531

neo, NeoMagic - run scripts/neomagic and get error message.     
without a neomagic in it, you get a message saying test does    
not have an argument.  Error message should be graceful         

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-535

neo, SCO - neo magic additional testing and put on BBS for OSR. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9422

FasTTrack Server not shown as installed in Software Manager     
505ENT.  Server still works under 505ENT.                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9428

Host to Ent upgrade specifies Navigator to administer FastTrack 
Please install SCO Netscape Navigator Gold to admin this server.
Should say something like use a Netscape browser to admin...    
Host had no browser layered on.  Pause might not happen if Host 
had a browser installed prior to intra-upgrade; not tested.     

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-1108

Can't mount WFWG share if share password protected              
(I used read only). Mount using LMC -o password=xx, mount hangs.
You do get the >24 hours message, so something getting through. 
Take of -o password=, and you get privilege message.            
Take off password of share, then mounts ok.                     

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-611

During installation Apache complains about OS release 5.0.6     
continues to install.  Simon has already fixed this and has a   
new cut of Apache for Optional Services.                        

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1440

Warning: spwr bp -> b_next is NULL  followed by a panic TrapE   
stack: spwrintr -> spwrsched -> getq -> msgcount -> panic       
Driver v2.05 privided by SMC also  highlight the problem        

     ----------------------------------------------------------------------

Bug-ID:     SCO-238-145

"NEED NEW DISPLAY" in "Console panic information"               
from Unix 3.2v2.0 (the EIP value of 0xd... would be 0xf... if it
was from 4.0 or later).  The writer apparently noted this, wrote
"NEED NEW DISPLAY", which ended up in print as well as online.  
BTW, no way to specify "SCO OpenServer Handbook" in bugreport.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-50

documentation claims crypt can only be shipped in the US        
doc should reflect this.  Canadian users see the man            
page and don't realize they can order the supplement.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-176

new "-A" flag to getty(M)                                       
entered usernames, passing "baduser" to login(M) if no such user
exists.  This protects other strings (e.g. a password mistakenly
entered at the login prompt) from being seen in ps(C) output.   
"-A" disables this, allowing all entered names to be passed.    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-234

Document new "dump=device(minor, noprompt)" option              
now accepts a 2nd parameter, which, if exactly equal to 1, makes
the kernel dump immediately to that device during a panic.  The 
alternative (without 1-for-noprompt) is that the console prompts
for media to be inserted, etc.  Attachment: proposed new text.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-337

describes PATH set as /bin:/usr/bin: when its  actually not     
No clear if shld correct cron code to doc setting.              
probab safer for existing use to just doc it correctly.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-413

custom(ADM) man page claims it can detect bad major/minor nums  
in the text...)                                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1595

Handbook ch10, sec4, and hwconfig(C) don't mention cpu.         
SCO-236-1594 against hwconfig(C) (incorrect report of cpu model)

     ----------------------------------------------------------------------

Bug-ID:     LTD-246-1242

Creating Network-enabled root boot diskettes dont work          
er 5, Creating an emergency boot floppy disk set/Adding Networki
ng files to the root floppy - All this suggested functionality  
just does not work. Misleads the customers and leads to support 
calls. Please remove                                            

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9888

Added -c cmd switch to su (5.0.6)                               
a command to run. Added for compat with su on other platforms   

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1618

Handbook lacks explicit sequence of divvy steps for add'l u fs's
TA 104965 shows this simple sequence explicitly in context of   
explaining a 500 bug, for example.                              

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-196

Document new grep facility to search for specific chars         
specifications in pattern strings.  The sequence "\0ooo"        
(backslash, 0, exactly three octal digits) is replaced with the 
corresponding ASCII character (see echo(C) for similar text,    
except that echo allows variable-length octal strings).         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-218

Document new ncheck(ADM) -t, -d flags; add note, example, xrefs.
and -t flags to report directories as well as files which match.
Limit args may be combined, acting as logical "OR".  An example:
ncheck -dst -i 45: reports device files, files/dirs with setuid,
setgid or sticky modes, and inode #45.  Crossref to chmod(S, C).

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-248

syslogd now takes -r switch to enable listen remote msgs        
new -r switch needs to be specified for syslogd to service      
messages from remote systems (syslog port)                      
see SCO-559-234                                                 

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-428

ftp(TC) needs doc of new -A switch ( and -p switch)             
(needed for servers not supporting AUTH cmd, exit on receipt)   
-p switch - support passive mode ftp access.                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1614

NIS client initialization doc should tell users to modify passwd
"Initializing an NIS Client", there is no mention whatever of   
having to add a "+:" to the end of the /etc/passwd file on the  
client in order for it to use NIS to lookup users. Without the  
+:, NIS users cannot login on NIS clients!                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1703

There is no instruction for giving the account rsh.             
account the restricted shell(rsh(C)) so that the user cannot    
have access to the rest of the system. 2)The directory of       
/usr/internet/ip/0.0.0.0/ does not exist by default so the      
instruction on itemized line#3 will result in an error.         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-692

Completely incorrect, NISRT and NISMAN do NOT exist !!          
System (NIS) from OS Enterprise Connectivity - SCO NFS section. 
Within SCOadmin software.  There are some files call NISRT but  
no packages !!                                                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-802

5th disk is not seen during installation, & disk isn't /dev/hd40
the limitation of disks during installation. This also brings to
note, that the 5th disk after installation, when configured is  
not named(device node) as the previous 4 disks, /dev/hd00,...   
/dev/hd30, see attachment for further details and information...

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-811

Needs doc of etc/default/lpd option PRINTJOB_LAG added 505      
seconds to wait between servicing remote job requests           
default (if otherwise unconfigured) is 30 secs. 0 to disable.   

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-167

New mv(C) "-1" flag should be documented.                       
flag invokes 1-src form even if target is dir.  Ex: "foo", "bar"
are dirs; `mv foo bar` creates subdir "foo/bar"; `mv -1 foo bar`
destroys existing "bar", replacing it with "foo", as would have 
happened if both were regular files.  Fails if "bar" not empty. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-195

Document new ls -T flag                                         
Without -T it prints either "Mon dd HH:MM" (for files less than 
6 months old) or "Mon dd  YYYY" (for older files).  With -T the 
format is always the same, and includes the seconds: "Mon dd HH:
MM:SS YYYY".  See attachment.                                   

     ----------------------------------------------------------------------

Bug-ID:     LTD-245-2827

Getting collisions when ftp-ing large file - no other n/w atvty 
reported by ndstat -l                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1148

XTI: Kernel panics (0E) on send/receive w/ many WinNT pcs'      
process (LISTEN) that listens on a endpoint for calls. for each\
call received, a PSTSVR, starts receive/respond from WinNT pc,  
each PSTSVR process then queues messages to a db msg queue; when
mulitple processes are run, the UNIX server panics              

     ----------------------------------------------------------------------

Bug-ID:     SCO-231-501

su fails recognize all of the supplementary groups by user      
change logins (e.g. su - foo) from root the complete supplementa
group list is not recognized causing group depended failures.   
see erg710666 - issue is same except for su instead of login    

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1429

Failure to pick up supplementary groups on login.               
Reproduced this problem with 2 groups and 18 users. I made their
login group "clerk" and made them a member of "alaska" and found
the bahavior to be consistent with what the customer reported.  
Tried many variations of group mem. and was able to reproduce.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-653

Cannot prevent root login via rexecd                            
remote rexec client. /etc/default/login:CONSOLE= does not apply.

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-630

Scanning 5.0.5 for enabled network svces causes panic           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-677

One byte missing from center of the packet.                     
Basically, use sp -d  -s 1024 on UW7 server, and2         
rp -s 1024 on Openserver system.  After 30 minutes, the process 
will fail.  Check out file and see that one of the bytes is     
missing from the center of the packet.                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9633

Deleting circular route panics the kernel                       
"ping ", and finally issue "route delete          
 ". A recursive call loop to        
rtfree() causes a kernel double panic. This bacause rt_gwroute  
points back to the destination route.                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1355

Font names incorrectly listed in W95 when loaded under Merge    
The font file names are listed but not the font names.          
Also, there is no option to "Install New Font" under Fonts->File
This problem does not occur in a stand alone Windows 95 install.

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1391

Install Fonts option shows up one time                          
Install Merge 4.0.2, Install W95, open Control Panel->Fonts->   
click on File and the option to install new fonts is available. 
Install a font and restart windows, after the restart the Option
to install Fonts is no longer available.                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-236-1602

user in over 8 groups cannot access visionfs shares on server   
user can immediately access the visionfs shares.  May be related
to sco-236-1177 and sco-236-662.                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-122

virge/DX - (S3 Trio3D) - refresh rates wrong w/ virge           
to work properly but the refresh rates are not correct          
adapter.  For example, 1600x1200 85 hz is actually 59.9         
640x480 256 60 hz is also wrong.  Need to contact hercu         
refresh rate setting information.                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-123

virge/DX - (S3 Virge/GX) - refresh rates wrong w/ virge         
to work properly but the refresh rates are not correct          
adapter.  For example, 1600x1200 85 hz is actually 59.9         
640x480 256 60 hz is also wrong.  Need to contact hercu         
refresh rate setting information.                               

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-544

virge, SCO, Hercules Terminator Beast - verify card wrks UW7/OSR
driver on OSR5 and UW7.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-136

Need to be placed on wbe                                        
and SCO-245-532 need to be made availible                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-545

virge, SCO, Hercules Terminator 3D/DX - verify card wrks UW7/OSR
driver on OSR5 and UW7.                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-486

m64, ATI, bug - ATI Rage IIC driver - draws garbage on screen   
in /usr/lib/X11/app-defaults/Pmwmrc.  Opaque moves cause the    
entire window to move (not just a wire frame).  Move a window   
across the screen to see this garbage. To see this, create a    
$HOME/.startxrc file and add the two lines: scoterm & and pmwm. 

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-193

ATI Mach64 drivers (m64 and cxm) query pci bus on vendor only.  
don't interfere with other ATI cards in the system that have    
same VENDOR number but use different driver.  Use similar code  
as qvis2000 /usr/lib/vidconf/scripts file.  Really only a proble
m on systems with embedded ATI cards.                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-533

m64, ATI - Updated m64 driver RAGE IIC                          
to test this on.                                                

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-513

m64, ATI - ATI should update m64 for ATI RAGE IIC AGP adapter.  
work at 1600x1200 64K 75 hz - comes up with large checkered grid
blocks on screen but 72hz at this res/color works fine.  Also   
couldn't test 1280x1024 16M colors - rquires 6MB or more memory.
ATI should fix 75Hz refresh.VENDOR/DEVICE: 1002475a7a0010020084 

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-536

neo, PrecisionInsight,NM2200, Garbage on screen using startx.   
and pmwm) the root weave screen is drawn incorrectly and        
sometimes the scoterm and other windows go bizerk.  Easy        
to see w/ xtests/testtools/graftest /usr/lib/grafinfo/neopci.xgi
in any mode. NM2200. Use .startxrc shown above.Weave always wrng

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-537

neo, PrecisionInsight,NM2200, 1280x1024 CRT doesn't work right. 
laptops w/ CRT plugged into back, screen comes up as 1024x768   
(with mouse offcenter).  If you manually switch (Fn->F5) to     
CRT only, then run startx, screen comes up in 1280x1024 correctl
y.  Appears that CRT/LCD output switching isn't working.        

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-538

neo, PrecisionInsight,NM2200, LCD/CRT output switching no work  
doesn't work correctly.  When you select LCD, the CRT also      
gets a signal. When you exit graphics, CRT and LCD are now      
both active even though when they initially started graphics,   
only LCD was active.  Related bug SCO-245-537.                  

     ----------------------------------------------------------------------

Bug-ID:     SCO-245-440

Chips 65555 in Toshiba Tecra 530CDT almost works.               
r.  Problem is that none of the CRT external monitor modes work.
Need to create a new grafinfo file for 65555 with working CRT   
entries AND add an AOF file to get this to work.                

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9853

neo, Need to make NeoMagic chipset driver available on ftp site 
FTP site for customers                                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-849

IQM does not preserve the system information                    
name and networking information, when installing 506 on a pre-  
Openserver installed system. In previous BL and 505, IQM does   
preserve the information.                                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-211

do basic configuration of resolv.conf                           
address so that we can create a basic resolv.conf               

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-585

IQM list of detected PCI NICs truncates all configuration data. 
PCI NICs during IQM.  Press  to see full list of NICs.
Three entries for 100B and two for 100+.  Have no idea what the 
PCI configuration is for any of the NICs.  All the Bus:Device:  
Function data is off-screen to the right.  Can't scroll right.  

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-931

incorrect/old version number                                    
order to avoid confusion with existing prod in field.           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-932

scoansi Terminfo not included in package                        
quick fatal error during protype of system.  The ISL term type  
was changed from ansi to scoansi in 5.06.                       

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-933

Can't create system FS during prototype of system.              
bloat.  ( increases in binary sizes. )                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-934

Log information is sent to wrong file.                          
loss of log information which is required for tracking down     
errors.                                                         

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-968

ramdisk too small for systemFS image                            
512Kb ramdisk creating during target install to contain it. The 
size of the ramdisk on creation has to be increased to 1MB. This
is done in the cutKnownImages prototyping prep script.          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-983

rootFS prototype file has wrong info                            
This makes the network MIT target install barf. Change to       
rootNet.proto to rename ansi to scoansi in the 's' directory    
will fix this problem                                           

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-1023

a fatal error is shown while creating netisl client disk        
network card and press continue. The netisl returns a fatal     
error: Fatal error in label.c, line132 Function                 
DestroyLabelWidget:widget=NULL Error while gethering client     
parameters IQM aborted. Client setup not completed.             

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9462

Should remove SCO Doctor from OS CD                             
CDROM, it will be easily available in the field (and licensed)  
making it difficult to obsolete it.  It should be only on       
the opt svcs CD, and can be removed from it for one of its      
quarterly revisions after doctor is obsoleted                   

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9463

Remove MSTPPP from OS CDROM                                     
opt svcs CDROM - should remove it from the OS CD and let it     
live only on the opt svcs CD                                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-247-189

incorrect uid/gid in CD filesystem                              
have uid 15737 and gid 100                                      

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-379

Take the ICC compiler out of the 506 base CD                    

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-380

AFPS needs to be taken off 506 base CD                          

     ----------------------------------------------------------------------

Bug-ID:     SCO-559-280

IQM initial system "canned" profiles not recognised or ignored. 
character terminal config" only and got "Invalid Option" error. 
2. Added "Database Services" to step 1.  IQM accepted.  3. Pick 
every profile at once, IQM accepted.  Must use optional software
screen picklist to verify the actual "profile".  Redundant.     

     ----------------------------------------------------------------------

Bug-ID:     SCO-242-200

Self-referential symlink found after installation.              
bl3 system: /usr/lib/lang/en/US/ISO8859-15/messages.  I don't   
see this causing any major problems (other than error messages  
for "Too many symbolic links in path (error 150)", but this is  
sloppy and easily fixed.                                        

     ----------------------------------------------------------------------

Bug-ID:     SCO-59-9975

ISO8859-15 not fully integrated into 5.0.6                      
ISO8859-15 not present in /usr/lib/lang